Additional information: Food; bump at the insulation jacket Volumetric volume (L): 13.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange…
Additional information: Biotech; 4 feet bolted to height-adjustable stainless steel weighing pallet; hand hole DN 200; an identical second vessel can be offered on request Volumetric volume (L): 1.600 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 160 °C Material wet parts: SS AISI 316 (V4A) Model: vertical…
Additional information: Food Volumetric volume (L): 3.200 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 3 Bar Max onderdruk: 1…
Additional information: Pharmacy; Hand hole DN 150 Volumetric volume (L): 620 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 0,30 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Pharmacy; Hand hole DN 150; foot ends cut off Volumetric volume (L): 348 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: Pharmacy; Manhole DN 450; outlet flange DN 15; crane lugs cut off Volumetric volume (L): 536 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Article type: second-hand storage tank Additional information: The tank has never been used Volumetric volume (L): 2.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: conical 15 ° Shape of tank: cylindrical Bottom type: conical 15 ° Total discharge: yes…
Additional information: Pharmacy; Outlet NW 40; hand hole NW 150; some residues of previous content Volumetric volume (L): 350 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: Baking soda; some residues of previous content Volumetric volume (L): 60.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet…
Additional information: Phosphorus; some residues of previous content Volumetric volume (L): 70.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of…
Additional information: Rainwater; some residues of previous content Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1,99 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 122…
Additional information: Cosmetics Volumetric volume (L): 25.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of…
Additional information: Cosmetics; 4-legged frame made of stainless steel 304; manhole diameter approx. 490 mm; cone height approx. 400 mm; traces of usage Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Vessel welded in stainless steel 304 frame; 1 pump in the frame is included in the scope of delivery; brownish deposits inside the vessel; Metallic discolouration inside Volumetric volume (L): 600 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI…
Additional information: Pharmacy; Tank lid made of 1.4404 (stainless steel 316) Volumetric volume (L): 72 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total…
Additional information: Chemistry Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 20 L Max Overpressure: 3 Bar Max. working temperature: 80 °C Documents included: no Technical…
Additional information: Filter plate welded inside (see pictures) Volumetric volume (L): 37.100 L Pressure in tank: pressure Max. pressure (Bar): 5 Bar Max. temperature (°C): 90 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Chemistry; Steel feet cut off below the mounting flange (see pictures); inside with reinforcement rings (see pictures) Volumetric volume (L): 50.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation:…
Additional information: Chemistry; Steel feet cut off below the mounting flange (see pictures) Volumetric volume (L): 50.950 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: Chemistry; Tempering only in the lower area of the cylinder & underbody (see pictures); manhole cover VA-plated Volumetric volume (L): 33.725 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 140 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat…
Additional information: Food; Manhole diameter approx. 410 mm Volumetric volume (L): 2.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 170…
Additional information: Vessel currently bolted to an aluminum frame Volumetric volume (L): 507 L Pressure in tank: pressure Max. pressure (Bar): 6,60 Bar Max. temperature (°C): 180 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 2 L Max Overpressure: 6 Bar Max.…
Additional information: 1 DN 200 hand hole in the upper bottom; 1 welded stainless steel insulating collar around the outside of the vessel; some residues of previous content Volumetric volume (L): 820 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 160 °C Material wet parts: SS AISI 316…
Additional information: Insulation brackets made of Fe around the outside of the cylinder (see photos); some residues of previous content; Metallic discolouration inside Volumetric volume (L): 3.000 L Pressure in tank: pressure Max. pressure (Bar): 14 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Pharmaceutical chemistry; Suspended design on 4 mild steel beams, which were bolted under a working platform; specified total height including these beams (total height of vessel only without beams approx. 1,830 mm); some residues of previous content Volumetric volume (L): 340 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,45 Bar Min. pressure (Bar): 1 Bar…
Additional information: Frame, stainless steel 304; flanged fitting on the spout; some residues of previous content Volumetric volume (L): 220 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Volumetric volume (L): 25.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 55 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 469 L Max Overpressure: 3 Bar Max. working temperature: 15 °C Type HE on the bottom: heating/cooling jacket Type…
Additional information: Cosmetics; on request - up to 11 pieces available Volumetric volume (L): 12.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Trolley not available for all tanks; 1 tank with a smaller dent; the details of total length, width and height refer to tank including trolley (total height without trolley 850 mm) Volumetric volume (L): 80 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model:…
Additional information: pipe end cut flush Volumetric volume (L): 8.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: headside…
Additional information: 1 dip tube inside the tank Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of…
Additional information: Biochemistry; 1 manhole diameter 400 mm in the front base; some residues of previous content; manhole cover plated Volumetric volume (L): 715 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: Biochemistry; Several pipes inside the tank; loose flanges made of Fe (galvanized) Volumetric volume (L): 500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Biochemistry; Welded stainless steel ring around the outside of the vessel (protrudes approx. 100 mm from the outer diameter (insulation)); some residues of previous content Volumetric volume (L): 1.085 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Biochemistry; Diameter of hand hole approx. 260 mm (hand hole lid plated); adhesions and metallic discoloration inside the vessel Volumetric volume (L): 270 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no…
Additional information: Pharmacy; Manhole diameter approx. 600 mm (1 opening diameter 165 mm in manhole cover); 2 bearing saddles made of Fe (painted); outlet with flanged fitting; some residues of previous content; manhole cover plated Volumetric volume (L): 11.650 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200…
Additional information: Pure water; Manhole DN 500; 1 stainless steel reinforcement ring around the outside of the cylinder; the loose stainless steel parts also on the pallet are not included in the scope of delivery (see photos); manhole cover plated; Metallic discolouration inside Volumetric volume (L): 6.350 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 90 °C Material…
Additional information: Pharmacy; Air-controlled outlet valve; hand hole diameter 200 mm Volumetric volume (L): 280 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge:…
Additional information: Pharmacy; Frame, stainless steel 304; including control unit (for steam sterilization and pressure superimposition; see photos) Volumetric volume (L): 600 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the bottom: half pipe…
Additional information: Food industry; Heating/cooling jacket can also be operated at 3 bar and 143°C (see photo on rating plate); minor dents in the insulating jacket; sheet metal cuts in the insulating jacket (especially in the lower base); some residues of previous content Volumetric volume (L): 5.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Material…
Additional information: Food; Feet were cut off during disassembly and are enclosed loose; several former connections were welded shut by the previous operator; some residues of previous content Volumetric volume (L): 8.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: Food; 1 welded stainless steel bar above the tank opening; 1 tank with DN 100 DIN 11851 outlet (disc tap without hand lever); pipe end cut flush Volumetric volume (L): 2.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open…
Additional information: Food; 1 welded stainless steel bar over the tank opening; 1 tank with 1 dent in the cylinder/cone base transition (see photos); pipe end cut flush Volumetric volume (L): 2.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Total…
Volumetric volume (L): 150 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Max. temperature (°C): 70 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 1,50 Bar Max. working temperature: 80 °C Type HE on the bottom: heating/cooling jacket Type…
Additional information: Cosmetics; Rounded heating coil inside the vessel (see photos); diameter of hand hole approx. 300 mm Volumetric volume (L): 318 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 143 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes…
Additional information: Slurry; Type plate no longer available; Diameter manhole cylinder 600 mm; 2 more identical containers are available on request; some residues of previous content Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Chemistry; Diameter of hand hole approx. 150 mm; 2 of the feet are shorter than the other two feet (see photos; take this into account when setting up the vessel); some residues of previous content Volumetric volume (L): 261 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat…
Additional information: Pharmacy; Feet with load cells (see photos) Volumetric volume (L): 198 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume:…
Additional information: Pharmacy; Feet with load cells (see photos) Volumetric volume (L): 733 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume:…
Additional information: Pharmacy; Attention: Type plate only available for 1 vessel (we assume that the operating pressure of 5 bar (air) is the same or similar for the second vessel, but have no proof of this); chassis, stainless steel 304; diameter of hand hole approx. 140 mm; on 1 vessel, the outer protective ring is slightly dented Volumetric volume (L):…
Additional information: Pharmacy; Device for holding load cells under the feet (the load cells themselves are no longer present) Volumetric volume (L): 733 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger:…
Additional information: Pharmacy; Technical documentation (also for the agitator) available for one of the two vessels Volumetric volume (L): 956 L Pressure in tank: vacuum Min. pressure (Bar): 0,50 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 83 L Max Overpressure:…
Additional information: Pharmacy; 4 stainless steel 304 brackets; total height indicated is estimated Volumetric volume (L): 2.950 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2,50 Bar Min. pressure (Bar): 0,90 Bar Max. temperature (°C): 138 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no…
Additional information: Cosmetics; Frame, Fe (galvanized); minor dents in the upper bottom; clamping ring of the manhole cover missing; disc tap very stiff (possibly defective); bump at the cylinder; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Cosmetics; 4-legged frame made of stainless steel 304; cone height approx. 650 mm; manhole diameter approx. 410 mm (fastening screws partially incomplete); 7 containers with stacking ring in the upper bottom; hand lever of the disk taps partially slightly bent or incomplete); containers partially with stronger dents; traces of usage Volumetric volume (L): 1.200 L Pressure in tank:…
Additional information: Half-pipe coil only in the upper part of the cylinder and on the bottom; manhole diameter: 500 mm Volumetric volume (L): 4.413 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger…
Article type: second-hand storage tank Additional information: 3 compartments of each 13.000L Volumetric volume (L): 39.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: conical Shape of tank: cylindrical Bottom type: conical Total discharge: yes Fixation points: 6 adjustable feet…
Additional information: Half-pipe coil only in the lower part of the cylinder; manhole diameter: 500 mm Volumetric volume (L): 6.875 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: food industry Volumetric volume (L): 11.630 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position…
Additional information: Pharmaceutical Chemistry; Support brackets, Fe; insulation jacket has partially come loose in the area of the lower bottom (see photos) Volumetric volume (L): 5.650 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with…
Additional information: Dairy; Outlet with bead and 2 connections, inner diameter approx. 60 mm; 3 plastic base plates; slight metallic discoloration inside Volumetric volume (L): 500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Pharmaceutical Chemistry; Frame made of 1.4301 (Aisi 304); 1 hand hole diameter approx. 310 mm with flanged, open attachment (diameter approx. 270 mm) on top of the vessel Volumetric volume (L): 1.183 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS…
Additional information: Pharmacy; Manhole diameter approx. 420 mm Volumetric volume (L): 1.300 L Pressure in tank: pressure Max. pressure (Bar): 0,10 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator:…
Additional information: Pharmacy; Manhole diameter approx. 510 mm; outlet slightly damaged Volumetric volume (L): 11.030 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): 0,30 Bar Max. temperature (°C): 80 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: Pharmacy; 1 screw connection of the manhole cover damaged Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 97 L Max Overpressure: 2…
Additional information: Pharmacy Volumetric volume (L): 500 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: headside…
Additional information: Chemistry; Attention: type plate only available for one of the two tanks; further small differences in the design of the two tanks (e.g. for the tank with nameplate, the wall thickness of the two bottoms is approx. 6.4 mm) Volumetric volume (L): 2.728 L Pressure in tank: vacuum Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C…
Additional information: Chemistry Volumetric volume (L): 2.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: headside Outlet of tank:…
Additional information: Chemistry; Diameter handhole approx. 310 mm; some residues of previous content; Metallic discolouration inside Volumetric volume (L): 1.174 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,50 Bar Min. pressure (Bar): 1 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: Chemistry; some residues of previous content Volumetric volume (L): 1.813 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Pharmacy Volumetric volume (L): 1.200 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 143 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Pharmacy Volumetric volume (L): 800 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 143 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Pharmacy; Clamp screws on the upper bottom are partially missing; some residues of previous content Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 143 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Frame, Aisi 304; 1 filter disc screwed onto the outlet (see photos) Volumetric volume (L): 106 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 96 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Top type: open Total discharge: yes Volume: 4 L…
Additional information: Tank slightly out of round; 1 welded bottom bearing inside the tank (see photos) Volumetric volume (L): 330 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: Tank hangs in a former stainless steel tilting frame (currently not tiltable); tank open at the top with a screwed-on, foldable stainless steel protective grille; outlet with plunger (requires on-site modification; plunger does not close tightly) Volumetric volume (L): 200 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Material wet parts: SS AISI 316…
Additional information: Pharmacy; scratches inside Volumetric volume (L): 568 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 134 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 108 L Max…
Additional information: Vessel was only used for validation and never went into service; technical documentation was ordered from the manufacturer but has not yet arrived; plastic casters on the feet were unscrewed for shipping but are included loose (see photos) Volumetric volume (L): 150 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1…
Article type: second-hand storage tank Additional information: we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 21.800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Top type: conical Shape of tank: cylindrical Bottom type: conical Bottom outlet:…
Additional information: 2 loose bearing shells, Aisi 304; manhole DN 500 Volumetric volume (L): 1.600 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator:…
Additional information: pharmacy; One of the pressure tanks is sold with 3 load cells; pneumatic bottom drain valve mounted on the outlet; manhole diameter approx. 300 mm Volumetric volume (L): 420 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A)…
Article type: second-hand storage tank Additional information: ex beer tank, still some traces of beer in the tank Volumetric volume (L): 3.300 L Max. density P (kg/m³): 1.200 Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Shape of tank: cylindrical…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: pharmacy; Filling pipe inside the tank (see pictures); GEMÜ diaphragm valve at the outlet Volumetric volume (L): 930 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes…
Additional information: pharmacy; Filling pipe including spray head inside the tank (see pictures); GEMÜ diaphragm valve at the outlet Volumetric volume (L): 900 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger:…
Additional information: pharmacy; 1 vessel with extensive documentation (the second vessel only with test certificates and copy of the certificate of conformity); one vessel with dent in the insulating jacket (see pictures); filling pipe inside the vessel (see pictures); GEMÜ diaphragm valve at the outlet Volumetric volume (L): 930 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3…
Additional information: pharmacy; Name plate not available anymore: according to last user the tank and jacket was vakuum and pressure rated; frame made of Aisi 304; electrical level indicator only in the under bottom (no guarantee) Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger…
Additional information: Pharmacy; Stainless steel 304 frame; container with stronger dents (see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
5000 liter tank i Syrafast 316 passar perfekt för krävande miljöer. Den är rymmer 5000 liter, tillverkad i Syrafast 316 och levererar hög driftsäkerhet över tid. Perfekt för professionell användning.
Upptäck 5000 liter tank i Syrafast 316 – en robust lösning för industrin. Med rymmer 5000 liter, tillverkad i Syrafast 316, helt ny säkerställs pålitlig prestanda. Perfekt för professionell användning.
5000 liter tank i Syrafast 316 passar perfekt för krävande miljöer. Den är rymmer 5000 liter, tillverkad i Syrafast 316, helt ny, modell Vertikal och levererar lång livslängd över tid. Ett smart val för din verksamhet.
Upptäck 5000 liter tank i Syrafast 316 – en robust lösning för industrin. Med rymmer 5000 liter, tillverkad i Syrafast 316 säkerställs hög driftsäkerhet. Beställ enkelt online idag.
Additional information: Chemistry (caustic soda); Sight glass in the upper bottom damaged Volumetric volume (L): 665 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 48 L Max Overpressure: 4 Bar Max…
Additional information: Liquid soap; tank is the smaller, right tank in the photo of the previous operator; tank was part of a process plant (the larger tank in the photo is also available under order number 9786 (subject to sale elsewhere) Volumetric volume (L): 90 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 150 °C Material wet parts:…
Additional information: Liquid soap; System drawing available; tank is the larger, left tank in the photo of the previous operator; tank was part of a process plant (the smaller tank in the photo is also available under order number 9787 (subject to sale elsewhere) Volumetric volume (L): 1.660 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 150 °C…
Additional information: Biotechnology; Technical documentation in Finnish Volumetric volume (L): 300 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 30…
Additional information: Available from February 2025 Volumetric volume (L): 10.640 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 3 Bar Max. working temperature: 120 °C Documents included: no Technical drawing included: no Registration plate on…
Upptäck 2000 liter tank i Syrafast 316 – en robust lösning för industrin. Med rymmer 2000 liter, tillverkad i Syrafast 316, helt ny säkerställs lång livslängd. Ett smart val för din verksamhet.
Upptäck 2000 liter tank i Syrafast 316 – en robust lösning för industrin. Med rymmer 2000 liter, tillverkad i Syrafast 316, helt ny, modell Vertikal säkerställs lång livslängd. Redo att användas direkt i drift.
2000 liter tank i Syrafast 316 är en pålitlig tank för industriella behov. Den är rymmer 2000 liter, tillverkad i Syrafast 316, helt ny, modell Vertikal och ger effektiv och säker drift. Beställ enkelt online idag.
