Additional information: pharmacy Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 0,50 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Pharmaceutical Chemistry; 4 support brackets, st. st.; diameter handhole 210 mm Volumetric volume (L): 420 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: Manhole diameter 350 mm; 2 support brackets, Aisi 316; 1 connection in the cylinder bent; Connections upper bottom: 1 x DN 100; 5 x DN 50; 2 x DN 25; some residues of previous content Volumetric volume (L): 1.330 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 0,50 Bar Max. temperature…
Additional information: Outlet DN 60 DIN 11851; reinforcement ribs inside under the upper bottom (removable); 2 fork pockets on the outside of the lower bottom Volumetric volume (L): 530 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no…
item available on order Article type: brand new storage tank - type K5-SL Additional information: inner surface 0.8µ Volumetric volume (L): 5.200 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model:…
Additional information: Winery; Manhole approx. 320 x 420 mm; Tanks marbled on one side on the outside; the foot lengths on the individual tanks are slightly different (usually 1 foot is shorter than the other two feet; the feet would have to be modified or relined accordingly before re-installation); 1 tank with a stronger dent in the upper cylinder area…
Additional information: Slurry; Type plate no longer available; further technical documents available; Diameter manhole cylinder 600 mm; a taper DN 50 is flanged to the outlet; 1 additional container of the same design is available on request Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 316 (V4A)…
item available on order Article type: brand new storage tank - type K5-SL Additional information: inner surface 0.8µ Volumetric volume (L): 5.400 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model:…
item available on order Article type: brand new storage tank - type K5-SL Additional information: inner surface 0.8µ Volumetric volume (L): 3.300 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model:…
item available on order Article type: brand new mixing tank - type VC-SLA Volumetric volume (L): 1.000 L Max. density P (kg/m³): 2.000 Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 285mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 1.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI…
Additional information: Alcohols and/or test fuels; Frame, Fe (galvanized); slight differences in design possible; Ball valve made of brass (nickel-plated); ; some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Beer tank; Height-adjustable screws of the feet incomplete or no longer exists (this would have to be compensated accordingly on site for installation); not every tank may have a spray ball; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin…
Additional information: pharmacy; one of the containers has an additional outlet (25mm) with a butterfly valve in the cylinder (see photo); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: Chemistry; (Frame made of Fe (galvanized, partially slightly bent); cone height: approx. 446 mm; outlet consisting of 3" socket ball valve with TW male coupling VK 80 made of brass and blind cap MB 80 made of aluminum (1 container with slightly different outlet, see photos); slight differences in the design of the containers possible; container partially welded…
Additional information: Water tank in agriculture; 2 chamber tank (1 x approx. 2000 liters, 1 x approx. 1000 liters); interior height approx. 1000 mm; Opening chamber 1: approx. 1,260 x 1,330 mm, opening chamber 2: approx. 1,260 x 750 mm; Walls slightly curved outwards Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI…
Additional information: Plant based pharmacy; Manhole diameter: approx 395mm; partially defective disc valves; partial dents on some containers; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Food industry; 1 dent in the inner tank (overpressure of the no longer functional heating jacket; see photos); insulation jacket with smaller dents and partially detached plates; tank with adhesions inside; Devices for load cells under the feet (3 loose load cells are included in the scope of delivery; these were not taken into account when specifying the…
Additional information: Pharmacy; Mobile frame, Aisi 304; Lid clamping ring is missing Volumetric volume (L): 120 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 16 L Max…
Additional information: chemistry; handhole cover is missing Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 26 L Max Overpressure: 1 Bar Max. working…
Additional information: Ice-cream produktion; support brackets made of Aisi 304; diameter manhole 420 mm Volumetric volume (L): 1.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no…
Additional information: printing ink; Insulating jacket was cut open by the previous operator and later stapled back together; 2 sheet metal cutouts in the container lid (see photos); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes…
item available on order Article type: brand new storage tank - type K2-SL Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Design pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model:…
Additional information: Wine storage; 1 manhole approx. 340 x 440 mm in the front bottom; tanks were professionally cleaned by a specialist company in 2024; walls curved outwards; Tanks with dents (see photos) Volumetric volume (L): 5.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (screwed on to enlarge the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; tank feet are partially slightly bent; 1 tank with several dents Volumetric volume…
Article type: second-hand mixing tank Additional information: we can place feet on the tanks --> feel free to inform yourself for price and possibility; we can’t give any guarantees about the agitator Volumetric volume (L): 1.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Pharmaceutical chemistry; 3 support brackets,Aisi 304; The flange ring of the manhole is made of Fe; some residues of previous content Volumetric volume (L): 2.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical…
item available on order Article type: brand new storage tank - type K3-IL Volumetric volume (L): 2.500 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile…
item available on order Article type: brand new storage tank - type K3-IL Volumetric volume (L): 2.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated Heat exchanger:…
Additional information: ice water tank in a dairy; some residues of previous content; pipe end cut flush Volumetric volume (L): 10.000 L Pressure in tank: pressure Max. pressure (Bar): 5 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included:…
Additional information: fruit juice industry; Manhole appr. 345 x 440 mm; Wall thickness of the lowest cylinder segment: approx. 4.0 mm; pipe end cut flush Volumetric volume (L): 25.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included:…
item available on order Article type: brand new storage tank - type K3-H12W.L Volumetric volume (L): 2.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single jacketed with…
item available on order Article type: brand new storage tank - type K2-SL Volumetric volume (L): 2.500 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Design pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model:…
item available on order Article type: brand new storage tank - type K2-SL Volumetric volume (L): 2.500 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Design pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model:…
Additional information: Dairy; Double jacket probably with trickle ring - only suitable for pressureless tempering; the welding of the double jacket in the upper area has come loose slightly in places; outlet diameter 65 mm (tapers towards the tank to approx. 50 mm); small dents inside the tank; heating connections cut off; pipe end cut flush Volumetric volume (L): 5.530…
Additional information: Pharmacy; The previous operator had the vessels hanging in a ring with load cells that was embedded in the ground (1 ring of each is included in the delivery; see photos); Outer diameter in the ring approx. 1,540 mm; insulating jacket made of material 1.0425 Volumetric volume (L): 885 L Pressure in tank: pressure and vacuum Max. pressure…
Additional information: Pharmacy Volumetric volume (L): 920 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 70 L Max Overpressure: 6 Bar…
Additional information: Mustard production; Manhole diameter approx. 410 mm; Frame, Fe (galvanized; struts partly slightly bent); Product adherence inside; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Chemistry; Frame, Fe (galvanized; partly slightly bent or showing signs of corrosion); slight differences in the design of the containers possible; Smaller dents in the container walls are possible in some cases; screw connections of the manhole cover partially incomplete; some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM -…
Additional information: Beverage industry; Agitator, Aisi 304 (1.4541); Feet with pedestal and screws made of Fe Volumetric volume (L): 700 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: Pharmaceutical Chemistry; 2 support brackets made of Fe (contact surface the other way around with cut off steel parts; see photos); further techn. Documents available; manhole cover plated; Metallic discolouration inside Volumetric volume (L): 2.750 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material…
item available on order Article type: brand new storage tank - type K3-H12W.L Volumetric volume (L): 3.300 L Max. density P (kg/m³): 1.300 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single jacketed with…
item available on order Article type: brand new mixing tank - type VC-HICA Volumetric volume (L): 750 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Paint industry; Frame, Fe (galvanized; partly with corrosion); slight metallic discoloration inside; 18 pieces in stock Bremen make Blefa (slight differences in design); some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: chemistry; Partially small dents in heating coils, slight seizure with shallow depth at the bottom of the jacket Volumetric volume (L): 100.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no…
Additional information: chemistry Volumetric volume (L): 49.338 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Max Overpressure: 6 Bar Max. working temperature: 200 °C Type HE…
Additional information: Food industry; Container with small dents; some residues of previous content; traces of usage Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; Diameter of outlet (fitting) approx. 44 mm Volumetric volume (L): 8.890 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated…
Additional information: Full set of pharma-compliant technical documentation included in delivery; tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 150mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 4.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; Diameter of outlet (fitting) approx. 44 mm Volumetric volume (L): 4.700 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated…
Additional information: Full set of pharma-compliant technical documentation included in delivery; tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 285mm Volumetric volume (L): 500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet…
Additional information: Full set of pharma-compliant technical documentation included in delivery; tank was manufactured for a global pharmaceutical company but was never put into operation; Hand hole with sight glass diameter: 150mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 1.700 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Full set of pharma-compliant technical documentation included in delivery; tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 150mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 1.040 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Pharmacy; 1 pump (brand GRUNDFOS) is included in delivery; 1 control cabinet (used by the previous operator for 3 of these tanks) can be purchased additionally for an additional charge (see photos) Volumetric volume (L): 1.880 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C…
Volumetric volume (L): 1.169 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 2,50 Bar Max. working temperature: 140 °C Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Pharmacy Volumetric volume (L): 880 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 41 L Max Overpressure: 6 Bar…
Additional information: Full set of pharma-compliant technical documentation included in delivery; tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 100mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 532 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 220mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI…
Volumetric volume (L): 1.169 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 2,50 Bar Max. working temperature: 140 °C Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Pharmacy; 1 pump is included in delivery (no guarantee of functionality) Volumetric volume (L): 390 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the cylinder; total height according to drawin); Tanks have been professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves, sampling valves and manhole seals were installed Volumetric volume (L): 24.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304…
Volumetric volume (L): 650 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 2,50 Bar Max. working temperature: 140 °C Heat exchanger: RVS 304 Documents included: no Technical drawing included: no…
Additional information: Pharmacy Volumetric volume (L): 550 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 135 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 67 L Max Overpressure: 2 Bar Max. working temperature: 135 °C Type HE…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the cylinder; total height according to drawing; lower bottom with slope to the outlet with cup (for installation, an appropriate foundation would have to be built on site); upper bottom and top cylinder segment made of 1.4571 (Aisi 316); Tanks have been professionally cleaned and overhauled by the…
Additional information: Wine storage; 1 manhole approx. 325 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves (screwed on to reduce the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; walls curved outwards; Total height including end of plastic tube…
Additional information: Wine storage; 1 manhole approx. 325 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves (screwed on to reduce the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; walls curved outwards Volumetric volume (L): 6.100 L Pressure in…
Additional information: Pharmacy; Heating coil approx. 5 turns; slight metallic discoloration inside Volumetric volume (L): 554 L Pressure in tank: pressure Max. pressure (Bar): 2,50 Bar Max. temperature (°C): 138 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Pharmacy; Heating coil approx. 6 turns Volumetric volume (L): 554 L Pressure in tank: pressure Max. pressure (Bar): 2,50 Bar Min. pressure (Bar): 2,50 Bar Max. temperature (°C): 121 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; 2 slightly different versions: version 1 with stackable frame in top and a reinforcement rod inside can be used to stack version 2 (without frame) on top; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (screwed on to enlarge the…
Additional information: pharma; Floor frame, V2A; manhole diameter approx. 250mm; immersion tube Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (screwed on to enlarge the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; 1 former connection was welded shut on top of the tank by the…
Article type: second-hand storage tank Additional information: There is still a bit of salt in the tank. Please look at the pictures. Volumetric volume (L): 38.000 L Pressure in tank: ATM - atmosferic Material wet parts: polyester (fiberglass) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: strong…
Article type: second-hand pressure tank Additional information: we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 230 L Pressure in tank: pressure Material wet parts: SS AISI 304L (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: strong conical Bottom outlet: yes…
Article type: second-hand pressure tank Additional information: The tanks have never been used. Volumetric volume (L): 185 L Pressure in tank: pressure Max. pressure (Bar): 6 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Article type: second-hand storage tank Additional information: The covering around the insulation has come loose at the front, please look carefully at the photos.; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 20.000 L Pressure in tank: pressure Design pressure (Bar): 4,50 Bar Max. pressure (Bar): 3,50 Bar Material wet parts: SS AISI 304 (V2A) Model:…
Additional information: Chemistry; Partly small dents Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: headside…
item available on order Article type: brand new storage tank - type K3-IL Volumetric volume (L): 5.200 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile…
Additional information: Cosmetics; Frame, Fe (galvanized); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position…
Additional information: colours & coatings; Manhole diameter: approx. 395 mm; ; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Solvents; Frame, Fe (galvanized); slight differences in design possible; Manhole diameter approx. 460 mm; partially smaller dents; Blind caps of the outlet are partially missing; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: Spirits; Slight metallic discoloration inside the tank Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: Lebensmittel; Behälterauslauf ragt über Behälterfüße hinaus, Behälter müsste zur Aufstellung entsprechend unterfüttert werden; 1 loses Fußgestell aus Normalstahl gehört zum Lieferumfang; Gesamthöhe inkl. Fußgestell Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total…
Additional information: bioethanol plant; support ring made of Fe; manhole covers are missing Volumetric volume (L): 11.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange…
item available on order Article type: brand new palletized transporttank (not ADR) - type IBC-PL Additional information: We can take more containers in production for you. These standardised PL IBC containers EW10.008V4N which we offer from our stock are applicable for food use. The tanks have a butterfly valve instead of a ball valve. Volumetric volume (L): 1.000 L Max.…
item available on order Article type: second-hand storage tank - type K-HL Additional information: Never been used Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Top type: conical 15 °…
Additional information: Dairy; Double jacket with trickle ring - only suitable for unpressurized tempering; in some cases, the welding of the double jackets has become slightly loose in the upper area; on request - up to 5x more vessels available (external storage) Volumetric volume (L): 16.150 L Pressure in tank: pressure Max. pressure (Bar): 3,20 Bar Max. temperature (°C): 150…
Additional information: Dairy; Probably 3 cooling rings around the cylinder; heating connections cut off; 1 former manhole in the lower cylinder area was welded shut by the previous operator; foot ends were cut off when the tank was dismantled and are loose (with small dents; see photos); dents at the insulation jacket; pipe end cut flush Volumetric volume (L): 19.600…
Additional information: N-Heptane; Manhole diameter approx. 410 mm; side walls in "trapezoidal sheet design" (basic external dimensions approx. 1200 x 900 mm); internal height approx. 2,000 mm Volumetric volume (L): 2.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
item available on order Article type: brand new production tank - type CHC-HILA Additional information: Delivered with food certificate; article price without control panel; see options; (The article can also be purchased without options) Volumetric volume (L): 250 L Max. density P (kg/m³): 1.200 Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Material wet parts: SS AISI…
Additional information: Cosmetics; 4 support brackets, stainless steel; Total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank; 1 dirt protection collar on the outside over the support brackets (diameter approx. 1,740 mm) Volumetric volume (L): 1.410 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Cosmetics; 4 support brackets, stainless steel; Total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank Volumetric volume (L): 2.900 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated…
Additional information: Cosmetics; 4 support brackets, stainless steel; Total height is estimated; slight metallic discoloration inside the tank Volumetric volume (L): 1.410 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes…
Article type: second-hand storage tank Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: square Bottom type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable feet Fixation point(s): RVS…
Additional information: Half coil 3 systems (16, 41 & 59 liters); small dents in the cylinder; Fasteners for the manhole cover are mostly missing; Ladder bracket bent (see photos); some residues of previous content Volumetric volume (L): 16.971 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat…
Additional information: Pharmacy; Original drawing available; tank was rebuilt in 1997 (e.g. changing the feet or connections); Evidence of the subsequent pressure test available; Conversion drawing only available as a fax; 1 dip tube inside the tank; some residues of previous content Volumetric volume (L): 530 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure…
Additional information: Food industry; Partly slightly larger residues of fruit pulp inside; some residues of previous content; traces of usage Volumetric volume (L): 600 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 0,15 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: brewery; Exact dimensions may vary slightly, 3 legs of 2 tanks were shortened during dismantling (these are included loose and can be welded back on site) Volumetric volume (L): 69.000 L Pressure in tank: pressure Max. pressure (Bar): 6 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Pharmacy; The tank was rebuilt at the end of 2012 (socket welding and shortening of the feet; test certificate from TÜV is available; the drawing provided in the appendix is the original drawing; 1 dent in the insulating jacket Volumetric volume (L): 1.344 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar):…
Additional information: Chemistry; Frame, Fe (galvanized); outlet 2"; small dents possible; certificates of inspection mostly available (for 5 the of the containers is stated in the certificates of inspection as material AISI 304; however, the nameplate says AISI 316 and subsequent measurements also showed AISI 316); some residues of previous content; traces of usage Volumetric volume (L): 1.251 L Pressure…
