Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
item available on order Article type: brand new palletized transporttank (not ADR) - type IBC-AZ/F1 Additional information: This is a palletized container: design pressure -0.15/+2 bar; operational pressure +0.49 bar. We can take more containers in production for you. Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.600 Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure…
item available on order Article type: brand new transport tank - type VC-SCO Additional information: example picture Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger:…
Article type: second-hand mixing tank Additional information: tank has never been used: welds polished Ra 0.8; agitator completely stainless-steel; we can’t give any guarantees about the agitator Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat…
Article type: brand new pressure tank - type CCT-ES-HL Additional information: PED 2014/68/EU DIN EN 10028-1 & DIN EN 10028-7 Volumetric volume (L): 1.000 L Finish stainless steel: pickled Pressure in tank: pressure Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed…
item available on order Article type: brand new storage tank - type K2-H12L Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single jacketed with…
Article type: brand new transport tank - type IBC-ES-EC Additional information: This is an aseptic container. Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Finish stainless steel: pickled Pressure in tank: pressure Design pressure (Bar): 3,40 Bar Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material…
item available on order Article type: brand new storage tank - type K2-SL Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Design pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model:…
item available on order Article type: brand new storage tank - type K2-SL Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.350 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Design pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model:…
item available on order Article type: brand new storage tank - type K2-SL Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.350 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Design pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model:…
item available on order Article type: brand new mixing tank - type VC-SCA Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
item available on order Article type: brand new mixing tank - type VC-HILA Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
item available on order Article type: brand new transport tank Additional information: UN31A/Y transportation hazardous liquids, packing groups II adn III, RID ADR Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.500 Ra inner weld: 1,60 Pressure in tank: pressure Max. pressure (Bar): 0,10 Bar Min. pressure (Bar): 0,10 Bar Max. temperature (°C): 50 °C Material wet parts: SS…
item available on order Article type: brand new transport tank - type IBC-PL Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.400 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. pressure (Bar): 0,15 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 304L (V2A) Model: vertical Configuration: single jacketed with…
item available on order Article type: brand new transport tank Additional information: GGVSEB / GGVSea / ADR / RID / IMDG-Code Volumetric volume (L): 1.000 L Max. density P (kg/m³): 2.100 Pressure in tank: pressure Max. pressure (Bar): 0,20 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top…
item available on order Article type: brand new storage tank - type K3-H12W.IL Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated with heat-exchanger…
item available on order Article type: brand new storage tank - type K3-IL Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated Heat exchanger:…
item available on order Article type: brand new storage tank - type K3-H12W.IL Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated with heat-exchanger…
Article type: second-hand mixing tank Additional information: 1000 liter V mixer manufactured by Iprocomsa in stainless steel mounted on stainless steel lined structure with butterfly valve. Pneumatic vibrator at the bottom of the cone. With documentation and electrical panel.; we can’t give any guarantees about the agitator Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet…
item available on order Article type: brand new mixing tank - type VS-H12S-IL Additional information: Heat exchanger on cylinder and bottom steam, hot water or thermal oil, as well as ice water or glycol; article price without agitator; Volumetric volume (L): 1.000 L Max. density P (kg/m³): 2.000 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM…
Additional information: transport containers for glue; partially slight differences in design; total height 1800 - 1960 mm; partially drawing available; some residues of previous content; dents at the insulation jacket; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger:…
Additional information: welding seams are not ground Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): galvanised steel Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator:…
Additional information: welding seams are not ground Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 14 L Max Overpressure: 2,50 Bar Max. working temperature: 95 °C Heat exchanger: RVS 304 Fixation…
Additional information: lye tanks; metallic discolourations inside; 1 tank with baffles inside; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of…
Additional information: Manhole diameter approx. 440 mm (manhole cover is loose); tank with small dents; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no…
Additional information: Pharmacy Volumetric volume (L): 1.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 135 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 5 L Max Overpressure: 6 Bar…
Additional information: Chemistry; Frame, Fe (galvanized; partially slightly bent); Partial nameplates and hand levers no longer available; some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included:…
Additional information: Chemistry; 4 feet, Aisi 304, screwed to transport frame, Fe (galvanized); Manhole diameter approx. 380 mm (manhole cover screws partially incomplete; slight differences in the design of the containers are possible; some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model:…
Additional information: Chemistry; Frame, Fe (galvanized; some struts slightly bent); some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: solvents; Frame, Fe (galvanized); some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: Pharmacy; Fame, Fe (galvanized); 1 container with small dents inside the container, the other container with dents inside and in the insulation jacket; According to the manufacturer, the double jacket can be operated at up to 6.0 bar at 120 °C (Behälter KG does not guarantee this, as it is not noted in the drawing)."; some residues of…
Additional information: plasticizer; Lacquered frame Fe (galvanized); Frame partly with signs of corrosion; Basic frame dimensions: 1030 x 1230 mm; Manhole diameter approx. 395 mm (1 container is missing a manhole cover); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat…
Additional information: colours & coatings; Frame made of Fe (lacquered); Manhole diameter approx. 370 mm; Basic frame dimensions: 1210 x 1030 mm; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: plasticizer; Frame Fe (galvanized); Frame partly with signs of corrosion; Basic frame dimensions: 1030 x 1230 mm; Manhole diameter approx. 400 mm; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: fragrances & scents; Stainless steel 304 frame; manhole diameter approx. 400 mm; some dents may be present in the containers; different outlet types and sizes (inner tube diameter 24 - 28 mm; see photos); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model:…
Article type: second-hand storage tank Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: dished Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 casters Manway(s): RVS…
Additional information: Pharmacy; Frame, Aisi 304; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position…
Additional information: Cosmetics; Accessible frame, Aisi 304 Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway:…
Additional information: Brewery; Tanks screwed into frame, Aisi 304; 1 hand hole diameter approx. 350 mm in the front base (hand hole cover made of plastic) Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: food (wine); Aluminum frame (a strut on one container is bent; see photos); 2 of the containers with butterfly taps (not quite complete anymore); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Alcohols and/or test fuels; Frame, Fe (galvanized; partly slightly bent); slight differences in design possible; Ball valve made of brass (nickel-plated); Diameter manhole approx. 420 mm (for 1 container the manhole is slightly pressed into the upper bottom; see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS…
Additional information: Cosmetics; Total height estimated (deviations possible); Agitator supports may need to be relined for installation; Diameter outlet end approx. 35 mm; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: Methanol; Frame, Fe (galvanized); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position…
item available on order Article type: second-hand storage tank - type K-HL Additional information: Never been used Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Top type: conical 15 °…
item available on order Article type: brand new palletized transporttank (not ADR) - type IBC-PL Additional information: We can take more containers in production for you. These standardised PL IBC containers EW10.008V4N which we offer from our stock are applicable for food use. The tanks have a butterfly valve instead of a ball valve. Volumetric volume (L): 1.000 L Max.…
Additional information: Lebensmittel; Behälterauslauf ragt über Behälterfüße hinaus, Behälter müsste zur Aufstellung entsprechend unterfüttert werden; 1 loses Fußgestell aus Normalstahl gehört zum Lieferumfang; Gesamthöhe inkl. Fußgestell Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total…
Additional information: Cosmetics; 3-legged frame made of V2A; 1 container with small dents; some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included:…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: Spirits; Slight metallic discoloration inside the tank Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: available Internal diameter tank: 950 mm Cylinder…
Additional information: Solvents; Frame, Fe (galvanized); slight differences in design possible; Manhole diameter approx. 460 mm; partially smaller dents; Blind caps of the outlet are partially missing; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: colours & coatings; Manhole diameter: approx. 395 mm; ; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Beer tanks; 1 hand hole approx. 190 x 240 mm in the front bottom (hand hole cover made of plastic); 2 loose foot frames, Aisi 304 (2 different versions of the foot frames, as the previous operator's tanks were stored on top of each other); total height depending on the design of the foot frame approx. 1,000 -…
Additional information: Cosmetics; Frame, Fe (galvanized); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position…
Additional information: Pharmacy; Frame, Fe (galvanized); Fixing screws for the manhole cover made of Fe; upper bottom curved upwards (see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no…
Additional information: Pharmacy; Foot frame, Fe (galvanized); wall height approx. 720 mm; Diameter manhole approx. 385 mm (the suspension of the manhole covers are no longer completely complete); Outlet diameter of pipe inside: 3 x 20 mm, 3 x 48 mm; Containers with dents; In 1 container the upper bottom is slightly dented; some residues of previous content; traces of…
Additional information: Paint industry; Frame, Fe (galvanized; partially with corrosion); slight metallic discoloration inside; 1 piece in stock Bremen, make Blefa (slight differences in design); some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: transport tank for viscous gels; Tanks are equipped with a pump (see pictures) Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: 72…
Additional information: Chemistry; Frame, Fe (galvanized; partly slightly bent or showing signs of corrosion); slight differences in the design of the containers possible; Smaller dents in the container walls are possible in some cases; screw connections of the manhole cover partially incomplete; some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM -…
Additional information: Mustard production; Manhole diameter approx. 410 mm; Frame, Fe (galvanized; struts partly slightly bent); Product adherence inside; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
item available on order Article type: brand new storage tank - type K2-SL Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Design pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model:…
Additional information: printing ink; Insulating jacket was cut open by the previous operator and later stapled back together; 2 sheet metal cutouts in the container lid (see photos); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes…
Additional information: chemistry; handhole cover is missing Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 26 L Max Overpressure: 1 Bar Max. working…
Additional information: Plant based pharmacy; Manhole diameter: approx 395mm; partially defective disc valves; partial dents on some containers; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Chemistry; (Frame made of Fe (galvanized, partially slightly bent); cone height: approx. 446 mm; outlet consisting of 3" socket ball valve with TW male coupling VK 80 made of brass and blind cap MB 80 made of aluminum (1 container with slightly different outlet, see photos); slight differences in the design of the containers possible; container partially welded…
Additional information: pharmacy; one of the containers has an additional outlet (25mm) with a butterfly valve in the cylinder (see photo); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: Beer tank; Height-adjustable screws of the feet incomplete or no longer exists (this would have to be compensated accordingly on site for installation); not every tank may have a spray ball; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin…
Additional information: Alcohols and/or test fuels; Frame, Fe (galvanized); slight differences in design possible; Ball valve made of brass (nickel-plated); ; some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 285mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 1.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI…
item available on order Article type: brand new mixing tank - type VC-SLA Volumetric volume (L): 1.000 L Max. density P (kg/m³): 2.000 Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Article type: second-hand fermentation tank Additional information: The tanks have never been used; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 20 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: Cosmetics; Total height including the control cabinet on a stand (see photos from the previous operator); Metallic discolouration inside Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the…
Article type: brand new storage tank Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.210 Ra inner weld: 1,60 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Article type: second-hand storage tank Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 attachment points…
Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Max Overpressure: 6 Bar Max. working temperature: 50 °C Type HE on the cylinder: heating/cooling jacket Heat exchanger: RVS 304 Fixation point(s): plastic Documents…
Additional information: Dairy; Diameter manhole approx. 420 mm; Insulation around the cylinder (small dents in the insulation jacket) Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 90 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical…
item available on order Article type: brand new storage tank - type VC-SLO Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: paints / varnishes; Frame Fe (galvanized); Frame partly with signs of corrosion; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): galvanised steel Documents included: no Technical drawing included:…
Additional information: Brewery; Tanks screwed into frame, Aisi 304; 1 hand hole diameter approx. 350 mm in the front base (hand hole cover made of plastic) Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 285mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 1.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI…
item available on order Article type: brand new production tank - type CHC-HILA Additional information: Delivered with food certificate; article price without control panel; see options; (The article can also be purchased without options) Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C…
item available on order Article type: brand new storage tank - type K3-IL Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated Heat exchanger:…
Additional information: Brewery; Probably 1 spray ball inside each tank Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no…
Additional information: Fruit juice industry; Frame, Aisi 304; Container with dents, especially in the lower bottom; stack struts partially bent; 1 DN 40 connection in the container wall (see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
item available on order Article type: brand new transport tank Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Pressure in tank: pressure Design pressure (Bar): 3,40 Bar Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A)…
Additional information: food (wine); Frame, Fe (galvanized); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for…
Additional information: Pharmacy Volumetric volume (L): 1.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 72 L Max Overpressure: 6 Bar…
Additional information: Fragrances and dyes for the beverage industry; Frame, Fe (galvanized; partially bent and with signs of corrosion); slight differences in design possible; type plates may be missing in some cases; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no…
Additional information: Food industry; Tanks are slightly out of round due to their design; tanks with small (sometimes slightly larger) dents; some of the tank feet are pressed into the lower bottom; tank lids are made of plastic (2 containers are missing lids; one lid has holes in the lid; see photos) Volumetric volume (L): 1.000 L Pressure in tank:…
Additional information: Pharmacy; Frame, Aisi 304; manhole diameter approx. 505 mm; outlets partially slightly curved upwards; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no…
Additional information: Pharmacy; Frame, Aisi 304; Manhole diameter approx. 505 mm; 1 small part of the containers is slightly higher with a total height of approx. 1,720 mm; smaller dents in the lower bottom; Outlets slightly pressed into the lower bottom; 1 frame strut is bent in 1 container; traces of usage Volumetric volume (L): 1.000 L Pressure in tank:…
Additional information: Pharmacy; Different manufacturers, therefore minor differences in the design (e.g. manhole cover); different outlet valves (on the black rotary valves (see photos) outlet diameter approx. 55 mm); drawing for Eurocont available; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Max. pressure (Bar): 0,65 Bar Min. pressure (Bar): 0,15 Bar Material wet parts:…
Additional information: Cosmetics; Frame, Fe (galvanized); Diameter manhole approx. 415 mm; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Cosmetics; Frame, Fe (galvanized); Diameter manhole approx. 415 mm; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Cosmetics; Frame, Fe (galvanized); diameter of manhole approx. 415 mm; screws for fastening the manhole cover made of Fe (corrosion); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included:…
Additional information: Cosmetics; Frame, Fe (galvanized); diameter of manhole approx. 415 mm (screws for fastening the manhole cover made of Fe (galvanized)); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included:…
Additional information: Cosmetics; Frame, Fe (galvanized); diameter of manhole approx. 420 m; slight differences in design (e.g. manhole cover); in 1 container the upper bottom is slightly pressed in, the other container has a dent in the side wall; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A)…
Additional information: Cosmetics; Frame, Fe (galvanized); diameter of manhole approx. 420 mm; 1 container with slight differences in design; this container has dents in the lower part of the container (see photos); last medium for this container was fixing varnish; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304…
Additional information: Fixing varnish; Frame, Fe (galvanized); diameter of manhole approx. 420 mm; slight differences in the design of the containers; container with dents in the lower bottoms; 1 container with screwed screw holder made of Fe (galvanized) around the manhole collar (this container also has internal adhesions); in 1 container the manhole cover screws are made of Fe (galvanized;…
Additional information: Cosmetics; Frame, Fe (galvanized; slight signs of corrosion); diameter of manhole approx. 420 mm; 1 dent in the lower area (see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: Fixing varnish; Frame, Fe (galvanized); diameter of manhole approx. 415 mm (for 2 containers, the fastening screws of the manhole cover are made of Fe (galvanized; with signs of corrosion); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no…
Additional information: Cosmetics; Frame, Fe (galvanized); diameter of manhole approx. 415 mm ( the fastening screws of the manhole cover are made of Fe (galvanized; with signs of corrosion); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Fixing varnish; Frame, Fe (galvanized); diameter of manhole approx. 415 mm (container with screwed screw holder made of Fe (galvanized) around the manhole collar); fastening screws of the manhole cover incomplete; dents in the lower bottom (see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316…
Additional information: Protective varnish; Frame, Fe (galvanized); diameter of manhole approx. 390 mm; ball of the ball valve made of plastic (probably Teflon); some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Pharmazie; Durchmesser Mannloch ca. 385 mm; 2 stärkere Beulen im Übergang des Zylinders zu den Böden; leichter Korrosionsansatz im Inneren des Containers Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Nytillverkade tankar. Dessa tankar kan tillverkas i både rostfritt 304 och syrafast 316. Tankarna kan även anpassas med isolering och eller uppvärmning/kylning. OBS: Bilden på tanken är ett exempel Diameter of the tank 1112 mm Hight of jacket 1000 mm Hight legs 400 mm Adjustable legs 3 pcs Conical centrical bottom down and on the top Material AISI 304 Total…
Nytillverkade tankar. Dessa tankar kan tillverkas i både rostfritt 304 och syrafast 316. Tankarna kan även anpassas med isolering och eller uppvärmning/kylning. OBS: Bilden på tanken är ett exempel Diameter of the tank 1112 mm Hight of jacket 1000 mm Hight legs 400 mm Adjustable legs 3 pcs Conical centrical bottom down and on the top Material AISI 304 Total…
Nytillverkade tankar. Dessa tankar kan tillverkas i både rostfritt 304 och syrafast 316. Tankarna kan även anpassas med isolering och eller uppvärmning/kylning. OBS: Bilden på tanken är ett exempel Diameter of the tank 1112 mm Hight of jacket 1000 mm Hight legs 400 mm Adjustable legs 3 pcs Conical centrical bottom down and on the top Material AISI 304 Total…
Nytillverkade tankar. Dessa tankar kan tillverkas i både rostfritt 304 och syrafast 316. Tankarna kan även anpassas med isolering och eller uppvärmning/kylning. OBS: Bilden på tanken är ett exempel Diameter of the tank 1112 mm Hight of jacket 1000 mm Hight legs 400 mm Adjustable legs 3 pcs Conical centrical bottom down and on the top Material AISI 304 Total…
Nytillverkade tankar. Dessa tankar kan tillverkas i både rostfritt 304 och syrafast 316. Tankarna kan även anpassas med isolering och eller uppvärmning/kylning. OBS: Bilden på tanken är ett exempel Diameter of the tank 1112 mm Hight of jacket 1000 mm Hight legs 400 mm Adjustable legs 3 pcs Conical centrical bottom down and on the top Material AISI 304 Total…
Nytillverkade tankar. Dessa tankar kan tillverkas i både rostfritt 304 och syrafast 316. Tankarna kan även anpassas med isolering och eller uppvärmning/kylning. OBS: Bilden på tanken är ett exempel Diameter of the tank 1112 mm Hight of jacket 1000 mm Hight legs 400 mm Adjustable legs 3 pcs Conical centrical bottom down and on the top Material AISI 304 Total…
Nytillverkade tankar. Dessa tankar kan tillverkas i både rostfritt 304 och syrafast 316. Tankarna kan även anpassas med isolering och eller uppvärmning/kylning. OBS: Bilden på tanken är ett exempel Diameter of the tank 1112 mm Hight of jacket 1000 mm Hight legs 400 mm Adjustable legs 3 pcs Conical centrical bottom down and on the top Material AISI 304 Total…
Article type: second-hand transport tank Additional information: the tanks have light dents and signs of use; here and there a screw is missing for the manhole; 1 tank is missing a butterfly valve; not all tanks still have a nameplate; please look carefully at the photos; the tanks come from cosmetics Volumetric volume (L): 1.000 L Pressure in tank: pressure…
Additional information: Pharmacy; Frame, Aisi 304; 1 container with smaller dents, 1 other container with stronger dents (see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no Documents included: no Technical drawing…
Additional information: Confectionery industry; Frame, Fe (galvanized); double jacket must be filled with heat transfer oil on site for heating; this is heated by a heating coil (content: 8 liters; permissible operating pressure: 4 bar; permissible operating temperature: 144° C) probably made of Aisi 304; inlets to the heating connections made of Fe; small dents in the insulating jacket; some…
Nytillverkade tankar. Dessa tankar kan tillverkas i både rostfritt 304 och syrafast 316. Tankarna kan även anpassas med isolering och eller uppvärmning/kylning. OBS: Bilden på tanken är ett exempel Diameter of the tank 1112 mm Hight of jacket 1000 mm Hight legs 400 mm Adjustable legs 3 pcs Conical centrical bottom down and on the top Material AISI 304 Total…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Article type: second-hand pressure tank Additional information: Duotank 2016; Previous product was beer Volumetric volume (L): 1.000 L Pressure in tank: pressure Design pressure (Bar): 4,30 Bar Max. pressure (Bar): 3 Bar Max. temperature (°C): 30 °C Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical…
Additional information: Pharmacy; 1 screw connection of the manhole cover damaged Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 97 L Max Overpressure: 2…
Additional information: Cosmetics; Manhole approx. 305 x 440 mm Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: DN25 DIN 11851 Agitator: yes Number of…
Article type: second-hand transport tank Additional information: previous product was condensed milk Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 0,20 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: flat Shape of tank: square Bottom type: conical Bottom outlet: yes Total discharge:…
Additional information: Cosmetics; Frame, Fe (galvanized); minor dents in the upper bottom; clamping ring of the manhole cover missing; disc tap very stiff (possibly defective); bump at the cylinder; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Manhole diameter: approx. 420 x 320 mm Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position…
Additional information: Manhole diameter 420 mm; 2 longitudinal sight glasses in the cylinder; outlet fitting (disk tap) incomplete Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Food; 2 longitudinal sight glasses in the cylinder; outlet fitting (disk tap) incomplete Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank:…
Article type: second-hand pressure tank Additional information: Tank has a dent, please look carefully at the pictures. Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: dished…
Additional information: Food; DN 100 hand hole in the upper bottom (in some cases the union nut is missing); small dents possible in some places Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Article type: second-hand pressure tank Additional information: There are a total of 6 tanks available, 2 are without lids (see photos). Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank:…
Additional information: Food; Frame, Fe (galvanized); slight differences in design (e.g. minor dimensional deviations); 2 containers with frame made of stainless steel 304 (one of them with minor dents in the insulating jacket; see photos); output presumably 1 kW at an operating temperature of approx. 60°C - 80°C (according to test report of a similar container); some residues of previous…
Additional information: Copper insulating jacket Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: no Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Agitator: yes Power: 2,20 Total height of tank: 2.350 mm Total outer width: 1.360…
Article type: second-hand mixing tank Additional information: Previous product was Bacteria. The tank was built by us and includes a complete file. A 1-year warranty on everything. The tank is in very good condition and has not been used much. Built in 2023, the tank will be completely cleaned, photos will follow as soon as possible; we can’t give any…
Article type: second-hand transport tank Additional information: Previous product was Methyl Acrylate (Cas. No. 96-33-3), the tanks are empty and cleaned; the tanks have not been used much and are in very good condition; UN marking. Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger:…
Additional information: Cosmetics; Manhole diameter approx. 410 mm; screws of the top flange are missing for the most part; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no…
Additional information: Natural remedies Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position of manway: in the bottom…
Additional information: Cosmetics; Hand lever of the outlet fitting no longer available Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
