Additional information: Food industry; According to the nameplate operating pressure 1 bar; However, the nameplate is only present on some of the containers; slight differences in the design of the container (e.g. manhole cover; feet); Container with some (smaller) dents; some residues of previous content; traces of usage Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material…
Additional information: Beverage industry Volumetric volume (L): 21.400 L Pressure in tank: pressure Max. pressure (Bar): 4,50 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 205 L Max Overpressure: 1,50 Bar Max. working temperature: 20 °C…
Additional information: Spirits; Manhole appr. 300 x 440 mm; Level indicator incomplete; Butterfly valve screwed to the outlet (for 1 tank DN 50, for the other tank DN 40); 1 lifting eye in the upper bottom; some residues of previous content; scratches inside Volumetric volume (L): 1.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304…
Additional information: Pharmacy; Outlet fitting incomplete (see photos); Technical documentation is available from the manufacturer and can be requested and purchased there Volumetric volume (L): 400 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 165 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with…
Additional information: Pharmacy; Double jacket, Aisi 304 around the cylinder and lower bottom; lower heating connection was welded shut by the previous operator; 2 feet were cut off by the previous operator (are loosely enclosed); some residues of previous content; bump at the insulation jacket Volumetric volume (L): 2.335 L Pressure in tank: ATM - atmosferic Material wet parts: SS…
Additional information: Food industry; Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 circular opening in the upper bottom Volumetric volume (L): 630 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Food industry; Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as smaller metal sheet cut outs in the insulation jacket (see photos); Feet / height-adjustable screws made of mild steel (with stainless…
Additional information: Fruit juice; Manhole approx. 320 x 420 mm; 1 tanks with smaller dents, 2 tanks with strong dents (1 with small cracks in one of the dents); height-adjustable screws of the feet are partially missing Volumetric volume (L): 16.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat…
Additional information: Fruit juice; Upper tank part with slope; 1 manhole approx. 345 x 440 mm in the front bottom; walls slightly curved outwards (see photos); Metallic discolouration inside Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Chemistry (toluene); Frame Fe (galvanized; lacquered); according to the manufacturer, ADR test papers are available and, if required, can be requested there using the serial number; traces of usage Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Cosmetics; Frame Fe, lacquered (corrosion); hand hole diameter approx. 300 mm; some residues of previous content Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Pharmacy; Manhole DN 600; 1 heating coil originally located inside the vessel no longer exists; Metallic discolouration inside Volumetric volume (L): 5.700 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no…
Additional information: Dairy; Height-adjustable screws of the feet are missing; hand lever of the butterfly valve is missing; Manhole cover not suitable for an operating pressure of 2 bar (vessel was probably operated without pressure by the previous operator and the cover was replaced accordingly); bump at the insulation jacket; Functionality of the double jacket not checked Volumetric volume (L):…
Additional information: Pharmacy (liquids; not hazardous to health); Test pressure: 1.5 bar; Test temperature: 127 ° C .; 1 step on the outside of the tank; 1 head hole diameter 300 mm in the top bottom; 2 welded brackets inside; small dents in the insulation jacket Volumetric volume (L): 310 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar…
Additional information: Double jacket around the lower cylinder area and the lower bottom; Manhole diameter approx. 415 mm; some residues of previous content Volumetric volume (L): 1.600 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Type…
Additional information: Lid rim slightly bent in places; Fastening screws of the cover segment are bent; Wall thickness of the hinged segment of the tank cap approx. 2 mm; some residues of previous content Volumetric volume (L): 2.740 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration:…
Additional information: Textile industry; Wall thickness of the bottom at the manhole: 4 mm; Wall thickness of the other bottom: 3 mm; insulation partly no longer complete; Insulating jacket partially detached or no longer completely; bump at the insulation jacket Volumetric volume (L): 21.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal…
Additional information: Brewery; Manhole appr. 310 x 440 mm; some residues of previous content Volumetric volume (L): 5.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no…
Additional information: Brewery; Manhole approx. 295 x 395 mm; the outlet extension of 1 tank is cut off (loosely enclosed); another tank with 1 dent in the transition from the cylinder to the upper bottom (see photos); some residues of previous content Volumetric volume (L): 5.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A)…
Additional information: Brewery; 3 loose bearing shells made of Fe (galvanized); 1 manhole appr. 300 x 395 mm in the front floor; reinforcement ring made of mild steel around the outside of the cylinder Volumetric volume (L): 19.499 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation:…
Additional information: 1 Tank with a dent in the upper bottom Volumetric volume (L): 6.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator:…
Additional information: Dairy; Manhole diameter 480 mm; smaller dents in the insulation jacket; Insulated cover of the lower botton with a plate made of Fe; cut off stainless steel parts on the outside of the tank (see photos); smaller dents in the feet; height-adjustable screws of the feet made of plastic; some residues of previous content Volumetric volume (L): 1.100…
Additional information: Cip tank in the beverage industry; Manhole diameter approx. 390 mm; 1 overflow pipe and short pipes from external connections inside the tank (see photos); 2 height-adjustable screws of the feet are missing; some residues of previous content Volumetric volume (L): 5.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Pharmaceutical chemistry; Support ring made of Fe; Sheet metal cut offs in the insulating jacket; the original manhole cover is no longer available (a similar manhole cover is loose, see photos); with 1 connection the enamel layer is slightly flaked off in places (see photos) Volumetric volume (L): 8.250 L Pressure in tank: pressure and vacuum Max. pressure…
Additional information: Adhesive industry; Support ring made of Fe; some of the flanges of the upper bottom were welded to the inside by the previous operator with a stainless steel sheet (and an opening was sometimes cut into these sheets; see photos); diameter manhole 480 mm; some residues of previous content; manhole cover is missing Volumetric volume (L): 10.875 L…
Additional information: Pharmaceutical chemistry; Manhole DN 350/450; further techn. documents available Volumetric volume (L): 7.385 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 735 L Max Overpressure:…
Additional information: Pharmaceutical chemistry; 2 support brackets made of Aisi 304 (contact surface the other way around; see photos); flanges partly made of Fe; heating connections cut off; smaller sheet metal cutouts in the insulation jacket; some residues of previous content; dents at the insulation jacket Volumetric volume (L): 1.345 L Pressure in tank: pressure and vacuum Max. pressure (Bar):…
Additional information: Pharmaceutical Chemistry; 3 support brackets made of Fe; half-coil around the lower cylinder area; 1 heating connection probably slightly bent; bump at the insulation jacket; manhole cover plated Volumetric volume (L): 3.532 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS…
Additional information: Dairy; Insulation cover of the lower bottom partly made of Fe (see photos); 1 strong dent in the insulation jacket Volumetric volume (L): 5.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on…
Additional information: Pharmaceutical chemistry; Support ring made of Fe; Manhole gallows bent; manhole cover plated Volumetric volume (L): 2.750 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no…
Additional information: Pharmaceutical Chemistry; With 1 vessel the agitator is missing; 1 tank with insulation; 2 claws made of V2A (contact surface the other way around; flanges partly made of Fe (see photos); some residues of previous content Volumetric volume (L): 1.300 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Pharmaceutical Chemistry; 2 support brackets made of Aisi 304 (contact surface the other way around; see photos); 1 vessel is equipped with insulation (see photos); flanges partly Fe; some residues of previous content Volumetric volume (L): 1.345 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200…
Additional information: Pharmaceutical chemistry; 2 support brackets made of Aisi 304 (contact surface the other way around; see photos); outlet with flanged taper; some residues of previous content Volumetric volume (L): 1.860 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316…
Additional information: Chemistry; Support ring made of Fe; smaller dents in the insulation jacket; Manhole cover partially plated; diameter manhole 490 mm; some residues of previous content Volumetric volume (L): 2.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A)…
Additional information: Chemistry; 4 loose foot extensions made of stainless steel are included; some residues of previous content; Metallic discolouration inside Volumetric volume (L): 2.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with…
Additional information: Chemistry; 4 support brackets made of Fe; 1 vessel with insulation (insulation jacket Fe, lacquered; diameter outside approx. 1780 mm); some residues of previous content; Metallic discolouration inside Volumetric volume (L): 3.685 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS…
Additional information: Pharmaceutical chemistry; 2 support brackets made of Aisi 304 (contact surface the other way around; see photos); flanges partly made of Fe Volumetric volume (L): 1.345 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat…
Additional information: Pharmaceutical chemistry; 2 support brackets made of Aisi 304 (contact surface the other way around; see photos); flanges partly made of Fe; further techn. documents available; bump at the insulation jacket Volumetric volume (L): 1.345 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material…
Additional information: Dairy; Manhole diameter 450 mm (suspension of the manhole cover incomplete); some residues of previous content; pipe end cut flush; Metallic discolouration inside Volumetric volume (L): 5.520 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included:…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 3 L Max Overpressure: 5 Bar Max. working temperature: 80 °C Fixation point(s): plastic Documents included: no Technical…
Additional information: Chemistry; Half-coils cylinder only in the lower cylinder area; some residues of previous content Volumetric volume (L): 4.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Max Overpressure: 6 Bar Type HE on the…
Additional information: Chemistry; Manhole diameter approx. 410 mm; 1 baffle inside over the outlet; insulation around the cylinder; some residues of previous content Volumetric volume (L): 850 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Chemistry; Support ring made of Aisi 304; 1 tank with 2 smaller dents in the lower bottom; in the case of one tank, the outlet is pressed slightly into the lower bottom; 1 tank with flange-mounted outlet fitting (if used, the total height would increase by approx. 320 mm); some residues of previous content Volumetric volume (L): 1.200…
Additional information: Chemistry; Insulation around the upper bottom; support ring made of Fe; drawing not available; diameter manhole 470 mm Volumetric volume (L): 8.651 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat…
Additional information: Brine tank (water / salt solution) in a chemical plant; Manhole cylinder DN 600; double outlet DN 50; some residues of previous content Volumetric volume (L): 10.800 L Pressure in tank: pressure Max. pressure (Bar): 3,20 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 3 L Max Overpressure: 5 Bar Max. working temperature: 80 °C Fixation point(s): plastic Documents included: no Technical…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of…
Additional information: seal manufacturing; insulation jacket with dents and metal cutoffs; 1 bent connection in the upper bottom; slight metallic discolourations inside; some residues of previous content Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: wine storage; Slight differences in design possible (e.g. partly 3 feet, partly 4 feet); manhole approx. 340 x 440 mm Volumetric volume (L): 11.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: steel alloys; cone height approx. 1200 mm; hand hole approx. 220 x 315 mm; hand hole collar and hand hole cover made of Fe; the hand hole cover is missing for 1 tank; fastenings of the hand hole covers of the other tanks are incomplete; some residues of previous content Volumetric volume (L): 265 L Pressure in tank:…
Additional information: food industry; tank cover made of 1.4301 (Aisi 304); some residues of previous content Volumetric volume (L): 700 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: food industry; adhesions and metallic discolourations inside the tank; tank cover made of 1.4301 (aisi 304); motor-/gear is missing Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 134 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge:…
Additional information: Cip-tank in an brewery; pipelines inside the tank (see photos); diameter manhole approx. 400 mm Volumetric volume (L): 6.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on…
Additional information: pharmacy; Pneumatic butterfly valve; welded pipeline inside the tank (see photos); cone height approx. 530 mm; minor differences in the design of the tanks possible Volumetric volume (L): 1.235 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 304 (V2A)…
Volumetric volume (L): 1.150 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: DN50…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator:…
Volumetric volume (L): 540 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position of…
Additional information: yeast tank in a brewery; cone height appr. 1.300 mm Volumetric volume (L): 13.700 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 40 L Max…
Additional information: brewery; 1 pipe inside the tank (see photos); manhole appr. 345 x 440 mm; dents at the insulation jacket Volumetric volume (L): 3.600 L Pressure in tank: pressure Max. pressure (Bar): 2,60 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total…
Additional information: condensate tank in a brewery; manhole appr. 340 x 420 mm; some residues of previous content; dents at the insulation jacket; pipe end cut flush Volumetric volume (L): 650 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 180 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile…
Additional information: spirits; manhole appr. 350 x 450 mm Volumetric volume (L): 6.800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position…
Additional information: Aromafabrik Volumetric volume (L): 990 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: available Agitator: yes Number…
Additional information: food colours; cylinder can only be heated in the lower area; 1 distillation column / heat exchanger made of V2A are included (see photos; not taken into account in the total height); some residues of previous content; bump at the insulation jacket; manhole cover plated Volumetric volume (L): 1.750 L Pressure in tank: vacuum Min. pressure (Bar): 1…
Additional information: pharmacy; metallic discolourations inside Volumetric volume (L): 650 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Max. temperature (°C): 170 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 8 Bar Max. working temperature: 170 °C Type HE…
Additional information: rennet-production; Feet originally stood on load cells, these are no longer available (see pictures); according to the type plate, the heating coil is designed for an operating pressure of 3 bar at a temperature of - 5 ° C (see photos on the type plate); diameter manhole 430 mm; suspension of manhole cover incomplete Volumetric volume (L): 3.500…
Additional information: rennet-production; smaller dents in the cylinder; small rectangular sheets were welded in by the previous operator in several places of the cylinder; some residues of previous content Volumetric volume (L): 12.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: pharmacy; Total height including foot pedestals and engine cladding; Double outlet diameter tube inside approx. 35 mm; Insulation jacket with slight damage; 1 crack in the upper double jacket connection Volumetric volume (L): 2.130 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 140 °C Material wet…
Volumetric volume (L): 1.150 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of…
Additional information: chemistry; tank mounting: traverse Fe; outlet fitting incomplete; manhole cover is missing Volumetric volume (L): 7.250 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Max Overpressure: 5 Bar Max.…
Additional information: pharmacy; handhole DN 200; some residues of previous content Volumetric volume (L): 1.333 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 143 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total…
Additional information: pharmacy; traces of usage Volumetric volume (L): 100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: headside…
Additional information: pharmacy; internal (moveable) fixtures; the outlet was probably fitted with a fitting, but this is no longer available (see photos) Volumetric volume (L): 650 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: chemistry; tank with a protective coating outside; dents and smaller cut-offs in the insulation jacket; handhole DN 250; Outlet with flanged (incomplete) fitting; some residues of previous content; Metallic discolouration inside Volumetric volume (L): 1.600 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes…
Additional information: adhesive production; former support brackets were cut off by dismantling and are not available anymore; 1 heating connection cut off; tank with stronger adhesions; manhole cover plated Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile…
Additional information: lye tanks; metallic discolourations inside; 1 tank with baffles inside; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on…
Additional information: adhesive production; frame Fe (with corrosion); rectangular opening appr. 490 x 590 mm in the upper bottom; some residues of previous content; motor-/gear is missing Volumetric volume (L): 2.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no…
Additional information: adhesive production; total height incl. foot frame; foot frame Fe (lacquered); some residues of previous content Volumetric volume (L): 2.300 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: lubricant production; diameter manhole appr. 390 mm; some residues of previous content Volumetric volume (L): 5.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no…
Additional information: lubricant production; agitator shaft cut off; weldet screws on the tank surface outside (see pictures); 1 pipeline inside; manhole cylinder appr. 340 x 440 mm; some residues of previous content; pipe end cut flush Volumetric volume (L): 8.640 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger:…
Additional information: adhesive production; loose lid with folding flap segment; some residues of previous content; bump at the insulation jacket Volumetric volume (L): 560 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes…
Additional information: adhesive production; 4 support brackets Fe; diameter manhole 580 mm; slight metallic discolourations inside; total height tank 1: appr. 5450 mm (this tank with diverse internal installations, see pictures); total height tank 2: appr. 4650 mm (baffles inside); some residues of previous content; manhole cover plated Volumetric volume (L): 12.800 L Pressure in tank: pressure Max. pressure (Bar):…
Additional information: adhesive production; 2 rectangular openings appr. 680 x 1190 mm in the upper bottom; feet former with height-afdjustable screw (no longer available); some residues of previous content Volumetric volume (L): 7.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: detergents; manhole appr. 320 x 415 mm; former connections were partly welded shut by the former operator; wall thickness cylinder lower segment: 2.5 mm; some residues of previous content Volumetric volume (L): 5.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: detergents; manhole appr. 320 x 415 mm; some residues of previous content Volumetric volume (L): 5.600 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no…
Additional information: welding seams are not ground Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 14 L Max Overpressure: 2,50 Bar Max. working temperature: 95 °C Heat exchanger: RVS 304 Fixation…
Additional information: coatings industry; diameter manhole 420 mm; some residues of previous content Volumetric volume (L): 750 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the bottom: heating/cooling jacket Type HE on the cylinder:…
Volumetric volume (L): 300 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Top type: open Total discharge: yes Max Overpressure: 5 Bar Max. working temperature: 80 °C Heat exchanger: RVS 304 Fixation point(s): plastic…
Volumetric volume (L): 300 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator:…
Volumetric volume (L): 300 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: DN50 DIN 11851 Internal…
Additional information: chemistry; tanks with differences in design (e. g. stirring elements and the number of windings of the heating coil; see pictures); some residues of previous content Volumetric volume (L): 500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank:…
Additional information: Designed as a fermentation tank for beer; fair tank - slight signs of wear; yeast plug mounted inside Volumetric volume (L): 1.100 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no…
Additional information: Designed as a storage tank for beer Volumetric volume (L): 1.195 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 2 L Max Overpressure: 6 Bar Max.…
Additional information: chemistry; fixtures inside (see pictures); some residues of previous content Volumetric volume (L): 13.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for…
Additional information: chemistry; 3-footed frame, Fe (lacquered; 1 foot shortened); clamp srews, Fe (with corrosion); some residues of previous content Volumetric volume (L): 313 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume:…
Additional information: Pharmazie; inkl. Pumpe und UV-Reaktor Volumetric volume (L): 295 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 9 L Max Overpressure: 3 Bar Max. working temperature:…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Top type: open Total discharge: yes Max Overpressure: 5 Bar Max. working temperature: 80 °C Heat exchanger: RVS 304 Fixation point(s): plastic Documents included: no Technical drawing…
Additional information: 3 support brackets, Aisi 304; some residues of previous content Volumetric volume (L): 8.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for…
Additional information: Druckgeräterichtlinie 97/23/EG Anhang III Modul H/H1 Werkstoffatteste 3.1 B Durchstrahlungsprüfung der Schweissnähte (2%) Volumetric volume (L): 1.280 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max. working…
Additional information: Designed as a storage tank for beer Volumetric volume (L): 1.175 L Pressure in tank: pressure Max. pressure (Bar): 2,50 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 7 L Max Overpressure: 3 Bar…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator:…
