Additional information: Fruit juice; Manhole approx. 310 x 410 mm; small dents in the cylinder; some residues of previous content Volumetric volume (L): 5.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no…
Article type: second-hand storage tank Additional information: Immersion resistance DIRAC 1000W - 120°C - 230/400V; Sight glass with lighting. The tank has never been used. Volumetric volume (L): 500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: yes Insulation: no Mobile tank: no Top type: dished Shape of…
Additional information: Food industry; Outlet with fitting (see photos) Volumetric volume (L): 1.340 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 85 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Food industry; 4 support brackets, Aisi 304; Manhole diameter approx. 420 mm; Insulation around the cylinder only; The previous operator had the two tanks in a stainless steel frame; This frame is still available and can be included upon request for an additional charge (see photos) Volumetric volume (L): 2.210 L Pressure in tank: ATM - atmosferic Max.…
Additional information: pharmacy; One of the tanks is missing 1 leg; some residues of previous content Volumetric volume (L): 1.809 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes…
Additional information: fruit juice; manhole diameter: approx. 395 mm; ; some residues of previous content; lime residues Volumetric volume (L): 1.700 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on…
Additional information: fruit juice; 2 loose concrete saddles; 1 manhole approx. 340 x 440 mm in the front bottom; manhole seal missing; Inner length: approx. 2,160 mm; Inner width: approx. 705 mm; Interior height: approx. 1,490 mm; ; some residues of previous content Volumetric volume (L): 2.130 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304…
Additional information: fruit juice; 2 loose concrete saddles; 1 manhole approx. 340 x 440 mm in the front bottom; Inner length: approx. 1,650 mm; Inner width: approx. 705 mm; Interior height: approx. 1,490 mm; the spout is slightly dented; circular hole (Ø= 36 mm) on top of the tank; some residues of previous content Volumetric volume (L): 1.585 L Pressure…
Additional information: Pharmacy/ Food (Fennel); frame, Fe (galvanized); some dents on the containers; partly the clamping rings of the manholes and the outlet valve are made of Fe; Alternatively, the containers are also available from us made of aluminum (#9302); ; some residues of previous content Volumetric volume (L): 1.950 L Pressure in tank: ATM - atmosferic Material wet parts:…
Additional information: Food industry; Inner tank in "funnel shape"; manhole diameter approx. 410 mm; tank screwed onto 3 load cells each in a 4-legged frame Volumetric volume (L): 750 L Pressure in tank: pressure Max. pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes…
Additional information: Emulsion/coating; Manhole approx. 470 x 400 mm; 1 dent in the cylinder; some residues of previous content Volumetric volume (L): 25.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: Vegetable fat tank in an ice cream factory; Heating coil around about half of the cylinder height and the lower bottom; Insulating jacket around the entire tank (1 tank with smaller dents in the insulating jacket); some residues of previous content; pipe end cut flush Volumetric volume (L): 16.500 L Pressure in tank: ATM - atmosferic Max. temperature…
Additional information: Brewery; 2 of the feet with damage; outlet at the end, pipe diameter inside approx. 65 mm (outlet pipe tapers at the beginning to a diameter of approx. 50 mm); Toggle screw of the manhole cover made of Fe (see photos) Volumetric volume (L): 3.900 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts:…
Additional information: stack water; Manhole diameter: approx. 500mm; ; some residues of previous content Volumetric volume (L): 2.167 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: cleaning supplies; insulation was added later by the previous owner; insulation slightly torn; ; some residues of previous content Volumetric volume (L): 400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: open Total discharge: yes Documents included: no…
item available on order Article type: brand new pressure tank - type OTP-SC Volumetric volume (L): 150 L Max. density P (kg/m³): 1.200 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 3 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical…
Additional information: aerosol production; smaller dents possible; height-adjustable screws partly bent; on 1 tank, feet slightly pressed into the lower bottom Volumetric volume (L): 6.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included:…
Additional information: pharmacy; frame, Aisi 304; ; traces of usage; small dents Volumetric volume (L): 1.670 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for…
Additional information: Pharmacy; Frame, Aisi 304; traces of usage Volumetric volume (L): 625 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position…
Article type: second-hand storage tank Volumetric volume (L): 1.460 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand storage tank Volumetric volume (L): 640 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand storage tank Volumetric volume (L): 460 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand storage tank Volumetric volume (L): 1.520 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand storage tank Volumetric volume (L): 750 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand storage tank Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand storage tank Volumetric volume (L): 920 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: cylindrical Bottom type: dished Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 casters Valve: RVS…
Additional information: Brewery Volumetric volume (L): 2.470 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: cylinder…
Additional information: brewery; some residues of previous content Volumetric volume (L): 1.125 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator:…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 3 L Max Overpressure: 5 Bar Max. working temperature: 80 °C Fixation point(s): plastic Documents included: no Technical…
Volumetric volume (L): 1.150 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of…
Additional information: Connections to the heating coils around the cylinder and the lower bottom were partially welded shut by the previous operator; we suspect that the heating coils are no longer functional; bump at the insulation jacket Volumetric volume (L): 1.700 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat…
Additional information: Wool fat; Manhole diameter approx. 580 mm; metallic discoloration inside in the area of the upper bottom; Insulation jacket with dents and smaller sheet metal cutouts; some residues of previous content; manhole cover plated Volumetric volume (L): 30.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 70 °C Material wet parts: SS AISI 304 (V2A) Model:…
item available on order Article type: brand new storage tank Additional information: THE TANKS ARE NOT COMPLETELY READY - PROJECT CANCELLATION - FOR THE INDICATED PRICE THEY CAN BE FINISHED IN SHORT TERM --> 5 TANKS ARE COMPLETELY READY. The conical head side is AISI 316L the rest is AISI 304L. Agitator is not included. Several heating/cooling zones can be…
Additional information: Ethanol; some residues of previous content Volumetric volume (L): 11.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of…
Additional information: 1 electric plug-in heater (4 kW) inside the tank; height-adjustable screws of the feet are no longer available; slight metallic discoloration inside the tank Volumetric volume (L): 2.245 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 145 °C Material wet parts: SS AISI 316 (V4A) Model:…
Additional information: wall length inside: approx. 2150 mm; Manhole diameter: approx. 460 mm; butterfly valve; Knob plate (V2A) in the lower cylinder area; Iso with V2A jacket (partly welded, partly riveted); some slight detached spots & smaller dents in the insulation jacket; External cooling element included with the following approx. dimensions: L= 1220 mm/ W= 1280 mm/ H= 1100 mm…
Additional information: Pharmacy; 3 loose load cells (no guarantee of functionality) are included in the scope of delivery; Metallic discolouration inside Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1,99 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger…
Additional information: Pharmacy; Diameter handhole appr. 200 mm; smaller dents in the insulation jacket Volumetric volume (L): 259 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 142 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank:…
Additional information: Dairy; Double jacket with trickle ring - only suitable for pressureless cooling; bumps in the double jacket; Double jacket cladding in the area of the upper bottom partially detached (see photos); some residues of previous content; pipe end cut flush Volumetric volume (L): 11.424 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure…
Additional information: Chemistry; Support ring, Fe; Manhole diameter appr. 480 mm; vessel with corrosion on the inside (see photos); Total height including agitator gear (without gear approx. 3400 mm); ; motor is missing; manhole cover is missing Volumetric volume (L): 8.609 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature…
Additional information: Chemistry; Support ring, Fe; Manhole diameter appr. 480 mm; Total height including agitator gear (without gear approx. 3500 mm); slight pitting inside the vessel; motor is missing; manhole cover plated Volumetric volume (L): 8.651 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet…
Additional information: colours & coatings; Manhole diameter: approx. 395 mm; ; some residues of previous content Volumetric volume (L): 300 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Fruit juice; Outlet without former fitting; slight metallic discoloration inside the tank (see photos); some residues of previous content Volumetric volume (L): 14.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Fruit juice; Total height corresponds to manufacturer drawing, the actual total height might deviate slightly Volumetric volume (L): 83.500 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included:…
Additional information: Food utilization; stronger buildups; sight glass in the cylinder; various connections in the upper bottom and cylinder Volumetric volume (L): 2.480 L Pressure in tank: vacuum Min. pressure (Bar): 1 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: Height-adjustable frame made of V2A; various connections in the upper bottom; upper bottom can be moved with a lifting/pivoting device, which is no longer available; Agitator flange centered in the upper bottom; some residues of previous content Volumetric volume (L): 1.980 L Pressure in tank: vacuum Min. pressure (Bar): 1 Bar Max. temperature (°C): 99 °C Material wet…
Additional information: Food utilization; 2 bearing shells, Fe; Test pressure (water): 1 bar; 3 openings diameter tube inside approx. 315 mm in the bottoms (1x with plated cover); 1 baffle plate inside the tank (see photos); some residues of previous content Volumetric volume (L): 1.260 L Pressure in tank: vacuum Min. pressure (Bar): 1 Bar Max. temperature (°C): 110 °C…
Additional information: fragrances & scents; Stainless steel 304 frame; manhole diameter approx. 400 mm; some dents may be present in the containers; different outlet types and sizes (inner tube diameter 24 - 28 mm; see photos); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model:…
Additional information: plasticizer; Frame Fe (galvanized); Frame partly with signs of corrosion; Basic frame dimensions: 1030 x 1230 mm; Manhole diameter approx. 400 mm; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: colours & coatings; Frame made of Fe (lacquered); Manhole diameter approx. 370 mm; Basic frame dimensions: 1210 x 1030 mm; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: plasticizer; Lacquered frame Fe (galvanized); Frame partly with signs of corrosion; Basic frame dimensions: 1030 x 1230 mm; Manhole diameter approx. 395 mm (1 container is missing a manhole cover); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: DN50…
Additional information: Food industry; Basic dimensions inside: approx. 1,180 x 1,180 mm; Inner height: approx. 790 mm; Lever of the outlet tap is missing; some residues of previous content Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Food industry; Double chamber tank 1800 liters (1 x 1300 liters, 1 x 500 liters); one manhole diameter approx. 415 mm per chamber; 1 outlet per chamber (1 x inner pipe diameter approx. 35 mm, 1 x inner pipe diameter approx. 38 mm); 2 welded reinforcements made of Aisi 304 in one of the chambers (see photos) Volumetric…
Additional information: Dairy; 1 tank with 1 dent in the insulation jacket in the area of the upper bottom (see photos); pipe end cut flush Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes…
Additional information: Chemistry; Frame, Fe (galvanized); Hand hole diameter approx. 210 mm (in the case of 1 container the hand hole cover is missing; this container also with stronger dents (see photos)); Ball valves very stiff (possibly defective); some residues of previous content; traces of usage Volumetric volume (L): 560 L Pressure in tank: ATM - atmosferic Material wet parts:…
Additional information: Chemistry; Frame, Fe (galvanized); hand hole diameter approx. 210 mm; 1 agitator flange and 1 cut-off connection in the manhole cover; Ball valve very stiff (possibly defective); some residues of previous content; traces of usage Volumetric volume (L): 1.255 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat…
Additional information: Food industry; 3-legged foot frame made of stainless steel with components made of mild steel; smaller dents in the insulating jacket; Fastening toggle of the manhole cover is missing Volumetric volume (L): 1.358 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts:…
Volumetric volume (L): 5.236 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 22 L Max Overpressure: 3 Bar Max. working temperature: 120 °C Heat exchanger: RVS 304 Documents included: no…
Volumetric volume (L): 5.236 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 22 L Max Overpressure: 3 Bar Max. working temperature: 120 °C Documents included: no Technical drawing included: no Registration…
Additional information: Dairy; Small dents and several small holes (corrosion) in the insulation jacket; 1 overflow pipe inside the tank; Outlet pipe dented (see photos); some residues of previous content Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no…
Additional information: 1 immersion sleeve for PT 100 probe inside the tank Volumetric volume (L): 2.263 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 16 L Max Overpressure: 4 Bar Max.…
Additional information: 1 immersion sleeve for PT 100 probe inside the tank Volumetric volume (L): 3.331 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 17 L Max Overpressure: 3 Bar Max.…
Additional information: Dairy; Diameter manhole appr. 415 mm; dents at the insulation jacket Volumetric volume (L): 900 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the bottom: heating/cooling jacket Type HE on the cylinder:…
Additional information: Food additives; Frame, Fe (galvanised; frames partially slightly bent and with slight signs of corrosion, especially in the outlet area); Thermoplate, Aisi 304 for heating/cooling around the lower bottom and over half the cylinder height; small dents in the bottom of the inner container (overpressure heating jacket); smaller dents in the insulating jacket (at least 1 container with…
Additional information: 4 supprt brackets, Fe; insulating jacket with smaller holes; outlet with lid diameter approx. 170 mm (in the lid 1 connection diameter 38 mm); Manhole cover closure parts made of Fe; Manhole cover plug screw bent (see photos); some residues of previous content; dents at the insulation jacket Volumetric volume (L): 2.100 L Pressure in tank: ATM -…
Additional information: Fragrance production (alcoholic scents); 2 loose bearing shells made of Fe; 1 manhole approx. 300 x 400 mm in the front bottom (bracket of the manhole cover made of aluminium); Inner length: approx. 2,520 mm; Inner width: approx. 720 mm; Inner height: approx. 1,480 mm Volumetric volume (L): 2.400 L Pressure in tank: ATM - atmosferic Material wet…
Article type: second-hand storage tank Additional information: we can’t give any guarantees about the agitator Volumetric volume (L): 100.000 L Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: conical Shape of tank: conical…
Additional information: Fragrance production (alcoholic scents); 1 manhole approx. 300 x 400 mm in the front bottom; 2 loose bearing shells, Fe Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Article type: second-hand pressure tank Additional information: Total height legs inclusive but without gear motor is 5250mm ; Gear motor present, though without shaft and propellor.; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 5.570 L Ra inner weld: 0,80 Pressure in tank: pressure and vacuum Design pressure (Bar): 0 Bar Max. pressure (Bar): 4 Bar…
Additional information: Beverage industry; Diameter manhole appr. 380 mm; some residues of previous content Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no…
Additional information: Pharmaceutical Chemistry; 2 support brackets, stainless steel; 1 piping inside the tank; small dents in the insulating jacket Volumetric volume (L): 600 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 95 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no…
Additional information: Beverage industry; Smaller dents on feet and outlet; the hight adjustable screws of the feet and the toggle screw of the manhole cover are missing; some residues of previous content; bump at the insulation jacket Volumetric volume (L): 3.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with…
Additional information: Beverage industry; Manhole approx. 400/430 mm; Tank with small dents; some residues of previous content Volumetric volume (L): 820 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on…
Additional information: Height-adjustable tipping frame, Aisi 304; outlet block flange inner diameter approx. 65 mm (see photos) Volumetric volume (L): 450 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 140 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger:…
Additional information: Pharmaceutical Chemistry; 3 support brackets, Aisi 304 (1 support bracket was cut off during disassembly and is enclosed loose); more technical documents available; manhole cover plated Volumetric volume (L): 8.380 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316…
Additional information: Pharmaceutical Chemistry; External heating cables without controls; 3 support brackets, Aisi 304 (1 support bracket was cut off during disassembly and is enclosed loose); more technical documents available; manhole cover plated Volumetric volume (L): 8.380 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material…
item available on order Article type: brand new transport tank Volumetric volume (L): 750 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Pressure in tank: pressure Design pressure (Bar): 3,40 Bar Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): 10 °C Material wet parts: SS AISI 304 (V2A)…
Additional information: 2 loose bearing shells, Fe (galvanized); 1 manhole each approx. 350 x 445 mm in the front bottom; each stronger dents in the cylinder Volumetric volume (L): 30.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Article type: second-hand pressure tank Additional information: Tank AD-2000 Merkblatt; hardly ever used Volumetric volume (L): 4.450 L Max. density P (kg/m³): 1.200 Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 90 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape…
Article type: second-hand mixing tank Additional information: Tank AD-2000 Merkblatt, agitator CE0344 ATEX Ex 2 1/3 G bc ; hardly ever used; we can’t give any guarantees about the agitator Volumetric volume (L): 1.995 L Max. density P (kg/m³): 1.400 Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 90 °C Material wet parts: SS AISI 304…
Article type: second-hand mixing tank Additional information: Tank AD-2000 Merkblatt, agitator CE0344 ATEX Ex 2 1/3 G bc T4 ; hardly ever used; we can’t give any guarantees about the agitator Volumetric volume (L): 2.100 L Max. density P (kg/m³): 1.400 Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 90 °C Material wet parts: SS AISI…
Additional information: Heating coil on the cylinder below; manhole diameter 500 mm; Insulation jacket with smaller dents, paintwork has partially come off; tank bolted to trolley made of Fe (trolley with signs of corrosion); Adhesions inside the tank Volumetric volume (L): 2.050 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 0,80 Bar Max.…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 3 L Max Overpressure: 5 Bar Max. working temperature: 80 °C Fixation point(s): plastic Documents included: no Technical…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of…
Additional information: Pharmacy; Tank was rebuilt in 2011; further technical documents available Volumetric volume (L): 1.229 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total…
Additional information: Rapeseed oil; Manhole cylinder NW 600; smaller sheet metal cutouts in the insulation jacket; bump at the insulation jacket; manhole cover plated Volumetric volume (L): 60.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1,50 Bar Min. pressure (Bar): 0,20 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration:…
Additional information: Pharmacy; According to the previous operator, the vessel's heating/cooling jacket is no longer functional; further technical documents available Volumetric volume (L): 660 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 140 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no…
Additional information: Pharmaceutical Chemistry; 4 feet, stainless steel, screwed to 4 support brackets, stainless steel; Manhole DN 400; slight metallic discoloration inside; further technical documents available; bump at the insulation jacket; manhole cover is missing Volumetric volume (L): 1.600 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 95…
Additional information: Pharmaceutical Chemistry; 4 feet, stainless steel, screwed to 4 support brackets, stainless steel; Manhole DN 600; slight metallic discoloration inside; bump at the insulation jacket; manhole cover is missing Volumetric volume (L): 2.200 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 95 °C Material wet parts:…
Additional information: Pharmacy; Fame, Fe (galvanized); 1 container with small dents inside the container, the other container with dents inside and in the insulation jacket; According to the manufacturer, the double jacket can be operated at up to 6.0 bar at 120 °C (Behälter KG does not guarantee this, as it is not noted in the drawing)."; some residues of…
Additional information: Ethanol; Manufactured according to DIN 6618; manhole diameter 600 mm; 2 pipes each inside the tanks; some residues of previous content Volumetric volume (L): 11.100 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: Yeast storage; Frame, Aisi 304 (partially bent struts); Type plates not available on all containers; 1 welded bracket each in the manhole collar inside (see photos); Suspensions of the manhole cover partially incomplete; Small dents on the containers possible, outlets partially bent (blind caps of the outlets are partially missing; hand lever partially bent); traces of usage Volumetric…
item available on order Article type: brand new pressure tank - type OTP-SC Volumetric volume (L): 500 L Max. density P (kg/m³): 1.200 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 3 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical…
item available on order Article type: brand new pressure tank - type OTP-SC Volumetric volume (L): 50 L Max. density P (kg/m³): 1.200 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 3 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical…
Additional information: paint (chemistry); outlet DN80 with flanged EBRO-valve and screwed male tanker coupling; container built according to DIN6601 for flammable liquids; frame, Aisi 304; partially smaller dents; for 1 container manhole cover made of Fe; some residues of previous content; traces of usage Volumetric volume (L): 1.070 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: solvents; Frame, Fe (galvanized); some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Chemistry; Frame, Fe (galvanized; some struts slightly bent); some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
