Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
Additional information: Chemistry; Insulation around the upper bottom; support ring made of Fe; drawing not available; diameter manhole 470 mm Volumetric volume (L): 8.651 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge:…
Additional information: Wine storage; 2 cooling plates each inside the tanks; 1 manhole approx. 300 x 400 mm in the front bottom; feet fitted with loose, height-adjustable screws (possibly no longer available for all feet; screws were not included in the overall height; this would increase accordingly if used); feet are arranged slightly offset Volumetric volume (L): 8.750 L Pressure…
Additional information: Wine storage; 1 manhole approx. 325 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves (screwed on to reduce the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; walls curved outwards; small dents in the front bottom possible;…
Additional information: Winery; 1 oval manhole (340 x 440) in the front floor; Volumetric volume (L): 8.870 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: DN50 DIN 11851…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; Diameter of outlet (fitting) approx. 44 mm Volumetric volume (L): 8.890 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank:…
Additional information: Sterile tank in a dairy; Double jacket with trickle ring - only suitable for cooling; 1 former connection welded shut in the upper bottom; connections partially cut off; weld seam of the double jacket has partially come loose in the upper cylinder area (see photos); pipe end cut flush Volumetric volume (L): 9.000 L Pressure in tank: pressure…
Additional information: Processing of wool fat; Maximum operating pressure heating coil 35 bar; 3 support brackets, Fe; Manhole diameter approx. 490 mm; several external parts made of Fe, e.g. B. manhole cover flange and insulating rings around the cylinder; pipe end cut flush Volumetric volume (L): 9.140 L Pressure in tank: vacuum Min. pressure (Bar): 1 Bar Max. temperature (°C):…
Additional information: Spirits; 5 loose plug-in feet made of Fe; manhole approx. 320 x 420 mm; stronger adhesions inside the tanks; 1 tank with dents in the upper bottom; the hand lever of the butterfly valve is missing on 1 tank Volumetric volume (L): 9.500 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: detergents; manhole appr. 325 x 415 mm; some residues of previous content Volumetric volume (L): 9.500 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: flange DN50…
Additional information: Dairy; 1 tank with 1 dent in the insulation jacket in the area of the upper bottom (see photos); pipe end cut flush Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 4 Bar Type HE on the cylinder:…
Additional information: bitumen; metal sheet cut outs in the upper bottom (see pictures); 2 electr. plug-in heaters (without guarantee of function); some residues of previous content; bump at the insulation jacket Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Documents included: no…
Additional information: Tank was designed as gas station for LNG but never used; though a bundled element in the middle of the tank it can be heated or cooled; 2 transport blocks made of Fe; part of the insulation & insulating jacket is missing in the upper part of the cylinder.; some residues of previous content; dents at the cylinder…
Additional information: food industry Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: DN50 DIN 11851 Agitator: yes Internal diameter tank: 2.000 mm Outer diameter…
Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: available Agitator: yes
Additional information: Food; Cooling/heating jacket available, but defective Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: available Agitator: yes Number of revolutions:…
Additional information: food industry Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: DN50 DIN 11851 Agitator: yes Number of revolutions: 20 / 40 Power:…
Article type: second-hand mixing tank Additional information: The tanks have never been used, only for test runs; we can’t give any guarantees about the agitator Volumetric volume (L): 10.000 L Max. density P (kg/m³): 1.180 Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Material wet parts: polyester (fiberglass) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: seal manufacturing; insulation jacket with dents and metal cutoffs; 1 bent connection in the upper bottom; slight metallic discolourations inside; some residues of previous content Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure:…
Additional information: Slurry; Type plate no longer available; further technical documents available; Diameter manhole cylinder 600 mm; a taper DN 50 is flanged to the outlet; 1 additional container of the same design is available on request Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: Detergent production; Slight differences in design, e.g. B. outlets; rectangular opening approx. 600 x 600 mm in the upper bottom; various small rust spots on the outside (see photos); 2 tanks with a dent in the cylinder; connections in the upper bottom are partially bent; some residues of previous content Volumetric volume (L): 10.000 L Pressure in tank:…
Additional information: Dairy; Smaller dents in the upper bottom and insulation jacket; pipe end cut flush Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank:…
Additional information: Winery; Manhole approx. 320 x 420 mm; Tanks marbled on one side on the outside; the foot lengths on the individual tanks are slightly different (usually 1 foot is shorter than the other two feet; the feet would have to be modified or relined accordingly before re-installation); 1 tank with a stronger dent in the upper cylinder area…
Additional information: solvent tank; double safety jacket made of Fe (RSt-2; 4 mm) Volumetric volume (L): 10.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 50 °C Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
