Additional information: Wine storage; Manhole approx. 325 x 425 mm; 1 handhole diameter 200 mm in the upper bottom; Outlet DN 100 DIN 11851, screwed on a taper with butterfly valve DN 50 DIN 11851 (see photos); Wall thickness of the lowest cylinder segment: 2.5 mm; If you are looking for another tank that is identical to this item, we…
Additional information: Wine storage; Heating / cooling jacket (Thermoplate) by approx. 1,220 mm of the cylinder height; Manhole approx. 325 x 425 mm; 1 handhole diameter 200 mm in the upper bottom; Outlet DN 100 DIN 11851, screwed on a taper with butterfly valve DN 50 DIN 11851 (see photos); If you are looking for another tank that is identical…
Additional information: Pharmacy; Outlet fitting incomplete (see photos); Technical documentation is available from the manufacturer and can be requested and purchased there Volumetric volume (L): 400 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 165 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with…
Additional information: Pharmacy; Double jacket, Aisi 304 around the cylinder and lower bottom; lower heating connection was welded shut by the previous operator; 2 feet were cut off by the previous operator (are loosely enclosed); some residues of previous content; bump at the insulation jacket Volumetric volume (L): 2.335 L Pressure in tank: ATM - atmosferic Material wet parts: SS…
Additional information: Food industry; Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 circular opening in the upper bottom Volumetric volume (L): 630 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Food industry; Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as smaller metal sheet cut outs in the insulation jacket (see photos); Feet / height-adjustable screws made of mild steel (with stainless…
Additional information: Fruit juice; Manhole approx. 320 x 420 mm; 1 tanks with smaller dents, 2 tanks with strong dents (1 with small cracks in one of the dents); height-adjustable screws of the feet are partially missing Volumetric volume (L): 16.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat…
Additional information: Fruit juice; Upper tank part with slope; 1 manhole approx. 345 x 440 mm in the front bottom; walls slightly curved outwards (see photos); Metallic discolouration inside Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Chemistry (toluene); Frame Fe (galvanized; lacquered); according to the manufacturer, ADR test papers are available and, if required, can be requested there using the serial number; traces of usage Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Cosmetics; Frame Fe, lacquered (corrosion); hand hole diameter approx. 300 mm; some residues of previous content Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Pharmacy; Manhole DN 600; 1 heating coil originally located inside the vessel no longer exists; Metallic discolouration inside Volumetric volume (L): 5.700 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no…
Additional information: Dairy; Height-adjustable screws of the feet are missing; hand lever of the butterfly valve is missing; Manhole cover not suitable for an operating pressure of 2 bar (vessel was probably operated without pressure by the previous operator and the cover was replaced accordingly); bump at the insulation jacket; Functionality of the double jacket not checked Volumetric volume (L):…
Additional information: Pharmacy (liquids; not hazardous to health); Test pressure: 1.5 bar; Test temperature: 127 ° C .; 1 step on the outside of the tank; 1 head hole diameter 300 mm in the top bottom; 2 welded brackets inside; small dents in the insulation jacket Volumetric volume (L): 310 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar…
Additional information: Double jacket around the lower cylinder area and the lower bottom; Manhole diameter approx. 415 mm; some residues of previous content Volumetric volume (L): 1.600 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Type…
Additional information: Lid rim slightly bent in places; Fastening screws of the cover segment are bent; Wall thickness of the hinged segment of the tank cap approx. 2 mm; some residues of previous content Volumetric volume (L): 2.740 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration:…
Additional information: Textile industry; Wall thickness of the bottom at the manhole: 4 mm; Wall thickness of the other bottom: 3 mm; insulation partly no longer complete; Insulating jacket partially detached or no longer completely; bump at the insulation jacket Volumetric volume (L): 21.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal…
Additional information: Brewery; Manhole appr. 310 x 440 mm; some residues of previous content Volumetric volume (L): 5.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no…
Additional information: Brewery; Manhole approx. 295 x 395 mm; the outlet extension of 1 tank is cut off (loosely enclosed); another tank with 1 dent in the transition from the cylinder to the upper bottom (see photos); some residues of previous content Volumetric volume (L): 5.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A)…
Additional information: Brewery; 3 loose bearing shells made of Fe (galvanized); 1 manhole appr. 300 x 395 mm in the front floor; reinforcement ring made of mild steel around the outside of the cylinder Volumetric volume (L): 19.499 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation:…
Additional information: Pharmacy; Mobile tilting tank (mobile frames made of mild steel (lacquered), tilting frame made of 1.4541 (304)); no outlet in the lower bottom; manhole diameter approx. 390 mm; 2 sight glasses in the upper bottom or in the manhole cover are missing Volumetric volume (L): 440 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Material wet…
Additional information: 1 Tank with a dent in the upper bottom Volumetric volume (L): 6.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator:…
Additional information: Dairy; Manhole diameter 480 mm; smaller dents in the insulation jacket; Insulated cover of the lower botton with a plate made of Fe; cut off stainless steel parts on the outside of the tank (see photos); smaller dents in the feet; height-adjustable screws of the feet made of plastic; some residues of previous content Volumetric volume (L): 1.100…
Additional information: Cip tank in the beverage industry; Manhole diameter approx. 390 mm; 1 overflow pipe and short pipes from external connections inside the tank (see photos); 2 height-adjustable screws of the feet are missing; some residues of previous content Volumetric volume (L): 5.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Pharmaceutical chemistry; Support ring made of Fe; Sheet metal cut offs in the insulating jacket; the original manhole cover is no longer available (a similar manhole cover is loose, see photos); with 1 connection the enamel layer is slightly flaked off in places (see photos) Volumetric volume (L): 8.250 L Pressure in tank: pressure and vacuum Max. pressure…
