Additional information: Pharmacy; Half-coil around approx. 900 mm of the cylinder height; bump at the insulation jacket Volumetric volume (L): 4.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Brewery; Manhole approx. 320 x 350 mm Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator:…
Additional information: Herbal pharmacy; Durchmesser Mannloch 510 mm; some residues of previous content; manhole cover is missing Volumetric volume (L): 8.300 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1,96 Bar Min. pressure (Bar): 0,83 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Brewery; Manhole appr. 305 x 440 mm Volumetric volume (L): 570 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the cylinder: half pipe welded onto the outside of the…
Additional information: Vapor water tank (dairy); exact dimensions may vary slightly; riveted insulation is damaged in some places (see pictures); The bottom of the tank is filled with concrete; some residues of previous content Volumetric volume (L): 50.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation:…
Additional information: Brewery; Manhole approx. 345 x 455 mm; 1 dent in the insulation jacket (see photos); some residues of previous content Volumetric volume (L): 2.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on…
Additional information: Cosmetics; Manhole diameter approx. 415 mm; outlet diameter approx. 40 mm; 1 tank with stronger adhesios inside; some residues of previous content Volumetric volume (L): 950 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank:…
Additional information: Cosmetics; Flanged to the outlet 1 reduction to diameter 65 mm; 1 dip tube inside the tank; 1 pallet with accessories (foot platforms, fittings, etc.) is included in the scope of delivery; these accessories were not taken into account in the stated total height Volumetric volume (L): 5.600 L Pressure in tank: pressure and vacuum Max. pressure (Bar):…
Additional information: Dairy; Minor differences in the design of the two tanks (e.g. location of the outlets); Manhole diameter approx. 510 mm; a former manhole and 1 connection in the lower cylinder area were welded shut by the previous operator; 1 tank with a smaller dent in the insulating jacket; see photos Volumetric volume (L): 8.000 L Pressure in tank:…
Additional information: Tank blasted and primed on the outside; Manhole diameter approx. 510 mm; 5 round connections in the lower bottom; 1 strong dent in the insulation jacket; former connections in the upper bottom cut off (see photos) (see photos) Volumetric volume (L): 4.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Pharmacy; 1 dent in the inner cylinder (overpressure double jacket; see photos) Volumetric volume (L): 435 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 143 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank:…
Additional information: Chemistry; 4-legged frame, Aisi 304; Hand hole diameter approx. 155 mm; some residues of previous content Volumetric volume (L): 225 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 95 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes…
Additional information: Chemistry; Electric heating cables around parts of the tank; Diameter manhole cylinder 600 mm; Insulation with larger cutouts in insulation and insulation jacket; tank is currently provided with a transport lock; 1 pipe inside the tank (see photos); manhole cover plated Volumetric volume (L): 32.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316…
item available on order Article type: brand new mixing tank - type K3-H12S-IL Volumetric volume (L): 3.300 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -0,10 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI…
Additional information: Putty; Small dents in the insulation jacket; outlet fitting incomplete; one of the feet is pressed into the inner bottom (see photos); some residues of previous content Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1,99 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI…
Additional information: Double jacket around approx. 1.800 mm of the cylinder height; Manhole approx. 410 x 510 mm; small dents in tank and insulating jacket; 1 sheet metal cutout approx. 200 mm in the middle of the upper bottom (see photos); some residues of previous content; pipe end cut flush Volumetric volume (L): 25.000 L Pressure in tank: ATM -…
Additional information: Beer; cooling surface: 17 m²; transport dimension: 7,5 x 3,0 x 3,0 m. Volumetric volume (L): 37.800 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 20 °C Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: no Volume: 260 L Max Overpressure: 1 Bar Documents included:…
Additional information: pharmacy; outlet fitting incomplete; ; some residues of previous content Volumetric volume (L): 2.068 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total…
Additional information: Food industry; 4 support brackets, Aisi 304; Manhole diameter approx. 420 mm; Insulation around the cylinder only; The previous operator had the two tanks in a stainless steel frame; This frame is still available and can be included upon request for an additional charge (see photos) Volumetric volume (L): 2.210 L Pressure in tank: ATM - atmosferic Max.…
Additional information: pharmacy; One of the tanks is missing 1 leg; some residues of previous content Volumetric volume (L): 1.809 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes…
Additional information: Food industry; Inner tank in "funnel shape"; manhole diameter approx. 410 mm; tank screwed onto 3 load cells each in a 4-legged frame Volumetric volume (L): 750 L Pressure in tank: pressure Max. pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes…
Additional information: Vegetable fat tank in an ice cream factory; Heating coil around about half of the cylinder height and the lower bottom; Insulating jacket around the entire tank (1 tank with smaller dents in the insulating jacket); some residues of previous content; pipe end cut flush Volumetric volume (L): 16.500 L Pressure in tank: ATM - atmosferic Max. temperature…
Additional information: Pharmacy Volumetric volume (L): 1.700 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: no Volume: 230 L Max Overpressure: 8 Bar…
Additional information: cleaning supplies; insulation was added later by the previous owner; insulation slightly torn; ; some residues of previous content Volumetric volume (L): 400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: open Total discharge: yes Documents included: no…
Additional information: Connections to the heating coils around the cylinder and the lower bottom were partially welded shut by the previous operator; we suspect that the heating coils are no longer functional; bump at the insulation jacket Volumetric volume (L): 1.700 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat…
Additional information: Wool fat; Manhole diameter approx. 580 mm; metallic discoloration inside in the area of the upper bottom; Insulation jacket with dents and smaller sheet metal cutouts; some residues of previous content; manhole cover plated Volumetric volume (L): 30.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 70 °C Material wet parts: SS AISI 304 (V2A) Model:…
Additional information: 1 electric plug-in heater (4 kW) inside the tank; height-adjustable screws of the feet are no longer available; slight metallic discoloration inside the tank Volumetric volume (L): 2.245 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 145 °C Material wet parts: SS AISI 316 (V4A) Model:…
Additional information: wall length inside: approx. 2150 mm; Manhole diameter: approx. 460 mm; butterfly valve; Knob plate (V2A) in the lower cylinder area; Iso with V2A jacket (partly welded, partly riveted); some slight detached spots & smaller dents in the insulation jacket; External cooling element included with the following approx. dimensions: L= 1220 mm/ W= 1280 mm/ H= 1100 mm…
Additional information: Pharmacy; 3 loose load cells (no guarantee of functionality) are included in the scope of delivery; Metallic discolouration inside Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1,99 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger…
Additional information: Pharmacy; Diameter handhole appr. 200 mm; smaller dents in the insulation jacket Volumetric volume (L): 259 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 142 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank:…
Additional information: Tank was designed as gas station for LNG but never used; though a bundled element in the middle of the tank it can be heated or cooled; 2 transport blocks made of Fe; part of the insulation & insulating jacket is missing in the upper part of the cylinder.; some residues of previous content; dents at the cylinder…
Additional information: Dairy; 1 tank with 1 dent in the insulation jacket in the area of the upper bottom (see photos); pipe end cut flush Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes…
Additional information: Food industry; 3-legged foot frame made of stainless steel with components made of mild steel; smaller dents in the insulating jacket; Fastening toggle of the manhole cover is missing Volumetric volume (L): 1.358 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts:…
Volumetric volume (L): 5.236 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 22 L Max Overpressure: 3 Bar Max. working temperature: 120 °C Documents included: no Technical drawing included: no Registration…
Additional information: Dairy; Small dents and several small holes (corrosion) in the insulation jacket; 1 overflow pipe inside the tank; Outlet pipe dented (see photos); some residues of previous content Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no…
Additional information: 1 immersion sleeve for PT 100 probe inside the tank Volumetric volume (L): 2.263 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 16 L Max Overpressure: 4 Bar Max.…
Additional information: 1 immersion sleeve for PT 100 probe inside the tank Volumetric volume (L): 3.331 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 17 L Max Overpressure: 3 Bar Max.…
Additional information: Dairy; Diameter manhole appr. 415 mm; dents at the insulation jacket Volumetric volume (L): 900 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the bottom: heating/cooling jacket Type HE on the cylinder:…
Additional information: Food additives; Frame, Fe (galvanised; frames partially slightly bent and with slight signs of corrosion, especially in the outlet area); Thermoplate, Aisi 304 for heating/cooling around the lower bottom and over half the cylinder height; small dents in the bottom of the inner container (overpressure heating jacket); smaller dents in the insulating jacket (at least 1 container with…
Additional information: 4 supprt brackets, Fe; insulating jacket with smaller holes; outlet with lid diameter approx. 170 mm (in the lid 1 connection diameter 38 mm); Manhole cover closure parts made of Fe; Manhole cover plug screw bent (see photos); some residues of previous content; dents at the insulation jacket Volumetric volume (L): 2.100 L Pressure in tank: ATM -…
Article type: second-hand storage tank Additional information: we can’t give any guarantees about the agitator Volumetric volume (L): 100.000 L Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: conical Shape of tank: conical…
Article type: second-hand pressure tank Additional information: Total height legs inclusive but without gear motor is 5250mm ; Gear motor present, though without shaft and propellor.; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 5.570 L Ra inner weld: 0,80 Pressure in tank: pressure and vacuum Design pressure (Bar): 0 Bar Max. pressure (Bar): 4 Bar…
Additional information: Pharmaceutical Chemistry; 2 support brackets, stainless steel; 1 piping inside the tank; small dents in the insulating jacket Volumetric volume (L): 600 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 95 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no…
Additional information: Beverage industry; Smaller dents on feet and outlet; the hight adjustable screws of the feet and the toggle screw of the manhole cover are missing; some residues of previous content; bump at the insulation jacket Volumetric volume (L): 3.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with…
Additional information: Heating coil on the cylinder below; manhole diameter 500 mm; Insulation jacket with smaller dents, paintwork has partially come off; tank bolted to trolley made of Fe (trolley with signs of corrosion); Adhesions inside the tank Volumetric volume (L): 2.050 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 0,80 Bar Max.…
Additional information: Pharmacy; Tank was rebuilt in 2011; further technical documents available Volumetric volume (L): 1.229 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total…
Additional information: Rapeseed oil; Manhole cylinder NW 600; smaller sheet metal cutouts in the insulation jacket; bump at the insulation jacket; manhole cover plated Volumetric volume (L): 60.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1,50 Bar Min. pressure (Bar): 0,20 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration:…
Additional information: Pharmacy; According to the previous operator, the vessel's heating/cooling jacket is no longer functional; further technical documents available Volumetric volume (L): 660 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 140 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no…
Additional information: Pharmaceutical Chemistry; 4 feet, stainless steel, screwed to 4 support brackets, stainless steel; Manhole DN 400; slight metallic discoloration inside; further technical documents available; bump at the insulation jacket; manhole cover is missing Volumetric volume (L): 1.600 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 95…
Additional information: Pharmaceutical Chemistry; 4 feet, stainless steel, screwed to 4 support brackets, stainless steel; Manhole DN 600; slight metallic discoloration inside; bump at the insulation jacket; manhole cover is missing Volumetric volume (L): 2.200 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 95 °C Material wet parts:…
Additional information: Pharmacy; Fame, Fe (galvanized); 1 container with small dents inside the container, the other container with dents inside and in the insulation jacket; According to the manufacturer, the double jacket can be operated at up to 6.0 bar at 120 °C (Behälter KG does not guarantee this, as it is not noted in the drawing)."; some residues of…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: Pharmacy; Double jacket with electric plug-in heater: 9 kW (incomplete; functionality not guaranteed); presumably the lower cylinder area of the tank can also be heated; manhole approx. 310 x 420 mm; Internal fittings (e.g. welded brackets) inside the tank; some residues of previous content Volumetric volume (L): 3.533 L Pressure in tank: ATM - atmosferic Max. temperature (°C):…
Additional information: Water for injections in pharmacy; Manhole DN 500; Feet were shared from the previous operator to allow the tank to be placed in a lower space Volumetric volume (L): 5.650 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 144 °C Material wet parts: SS AISI 316…
Additional information: Pharmazeutische Chemie; 1 Mannloch Durchmesser 500 mm im Frontboden; kleinere Beulen im Isomantel; manhole cover plated Volumetric volume (L): 1.830 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no Insulation: yes…
Additional information: Chemistry; Tank lid, Aisi 304; Tank with dents inside, tank lid bulging outwards (probably due to overpressure in the inner tank and double jacket); adhesions inside the tank; small dents in the insulation jacket Volumetric volume (L): 2.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger…
Additional information: Pet food; Manhole diameter approx. 510 mm; 1 x outlet flange diameter pipe inside 80 mm, 1 x threaded outlet diameter pipe inside approx. 125 mm; 1 lateral agitator was welded into the lower cylinder area from previous operator; the heating coil may have been damaged; Insulation was bolted over the cylinder heating coil heating connections; the thermoplate…
Article type: second-hand storage tank Additional information: we can’t give any guarantees about the heating/cooling jacket; we can’t give any guarantees about the agitator Volumetric volume (L): 160.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Top type: conical Shape…
Article type: second-hand mixing tank Additional information: we can’t give any guarantees about the agitator Volumetric volume (L): 4.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: conical Shape of tank: cylindrical Bottom type: conical Total discharge: yes Fixation points:…
Article type: second-hand storage tank Additional information: Small dent on the bottem of the decorative jacket. See pictures.; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 22.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Top…
Additional information: Food production; Manhole approx. 410 x 510 mm; heating coil around approx. 1,800 mm of the lower cylinder height; slight signs of corrosion inside the tanks; pipe end cut flush Volumetric volume (L): 15.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Tank is currently on a pedestal; should this be used for installation, the total height would increase to approx. 2,600 mm Volumetric volume (L): 729 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated…
Additional information: Food industry; Smaller dents in the insulation jacket; some residues of previous content Volumetric volume (L): 5.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 100 L Max Overpressure:…
Additional information: Agriculture; Sheet metal cutout in the insulation jacket of the lower floor (underneath Fe plate); bump at the insulation jacket; scratches inside; Functionality of the double jacket not checked Volumetric volume (L): 5.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes…
Additional information: Pharmacy Volumetric volume (L): 1.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 135 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 5 L Max Overpressure: 6 Bar…
Additional information: Pharmacy; Tank integrated in the frame with control cabinet, pump, various fittings, etc. Volumetric volume (L): 100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 165 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile…
Additional information: Labherstellung; Rechtecköffnung ca. 1000 x 1000 mm im Oberboden; leichter Korrsosionsansatz innen und außen Volumetric volume (L): 15.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Outlet DN 60 DIN 11851; reinforcement ribs inside under the upper bottom (removable); 2 fork pockets on the outside of the lower bottom Volumetric volume (L): 1.050 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 180 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile…
Additional information: Pharmaceutical chemistry; Support ring, Fe; Manhole cover incomplete (see photos); bump at the insulation jacket; manhole cover plated Volumetric volume (L): 3.860 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat…
Volumetric volume (L): 118.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,99 Bar Min. pressure (Bar): 0,25 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no…
Additional information: Pharmaceutical chemistry; Material 1.4462 (duplex steel); 1 manhole DN 600 in the cylinder, 2 manholes DN 600 in the upper bottom (in these two manhole covers there are level indicators and pipes); vessel inside with corrosion; sheet metal cut-outs and minor dents in the riveted insulating jacket (hardly avoidable due to dismantling and transport); bump at the insulation…
Additional information: Pharmacy Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the bottom: heating/cooling jacket Type HE on the cylinder: heating/cooling jacket Documents included: no Technical drawing included: no Registration…
Additional information: An internal double jacket was subsequently welded into the tank by the previous operator, which reduces the volume specified on the type plate to approx. 500 liters (see photos); Unfortunately, we do not know to what extent the pressure and temperature information given on the type plate is still valid; total inner diameter of the tank approx. 900…
Additional information: Pharmacy; Mobile Frame, AISI 304 (the control cabinet boxes shown in the photos are empty); smaller dents inside the tanks; Upper bottoms, Aisi 304 (hangings and fastening screws of the upper bottoms are missing); pipe end cut flush; Metallic discolouration inside Volumetric volume (L): 313 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C):…
Additional information: Rennet production; Manhole diameter approx. 415 mm; tank with adhesions inside; slight corrosion on the inside and outside of the tank; dents at the insulation jacket Volumetric volume (L): 15.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge:…
Additional information: Smaller dents in the insulation jacket; 2 hand holes with a diameter of approx. 175 mm each and 1 elongated sheet metal cutout in the lid (see photos); some residues of previous content Volumetric volume (L): 850 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no…
Additional information: Brewery; According to information from the previous operator, the tanks were last used as fermentation tanks in a brewery with an operating pressure of +2 bar. According to the drawing, the tanks were tested with a test pressure of +4 bar. However, a TÜV test was not carried out; Diameter manhole 350 mm; 1 tank is missing 1…
Additional information: Dairy; 1 manhole diamter 500 mm in the front bottom Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for…
Additional information: Dairy; 1 manhole appr. 415 x 495 mm in the front bottom; some residues of previous content Volumetric volume (L): 3.300 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: Saline solution; Dents in the insulation jacket possible; The production and documentation drawings are available from the manufacturer and can be purchased separately from there; some residues of previous content; pipe end cut flush Volumetric volume (L): 5.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C):…
Additional information: Tank on frame rest made of Fe; Fastening of the manhole cover incomplete; some residues of previous content; bump at the insulation jacket Volumetric volume (L): 850 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: no Documents included:…
Additional information: 1 stronger and smaller dents in the insulation jacket; lower heating connection cut off; some residues of previous content; pipe end cut flush; scratches inside; Functionality of the double jacket not checked Volumetric volume (L): 350 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger:…
Additional information: Smaller dents in the insulation jacket (see photos) Volumetric volume (L): 350 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: open Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange…
Additional information: Small dents in inner cylinder; insulation of the lower bottom no longer complete; some residues of previous content; bump at the insulation jacket; Functionality of the double jacket not checked Volumetric volume (L): 13.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Sorbitol tank in the food industry; 1 partition (with openings) in the middle of the tank divides the cylinder length of 5000 mm into 2 x 2,500 mm; lower area in the inner tank straight instead of round due to the design; both tank chambers with a manhole diameter 450 mm; 1 chamber with an outlet DN 65…
Additional information: Frame, Fe; Tank open at the top with a loose lid segment (see photos) Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Pharmacy; Outlet fitting incomplete (see photos); Technical documentation is available from the manufacturer and can be requested and purchased there Volumetric volume (L): 400 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 165 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with…
Additional information: Pharmacy; Double jacket, Aisi 304 around the cylinder and lower bottom; lower heating connection was welded shut by the previous operator; 2 feet were cut off by the previous operator (are loosely enclosed); some residues of previous content; bump at the insulation jacket Volumetric volume (L): 2.335 L Pressure in tank: ATM - atmosferic Material wet parts: SS…
Additional information: Food industry; Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 circular opening in the upper bottom Volumetric volume (L): 630 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Food industry; Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as smaller metal sheet cut outs in the insulation jacket (see photos); Feet / height-adjustable screws made of mild steel (with stainless…
Additional information: Pharmacy; Manhole DN 600; 1 heating coil originally located inside the vessel no longer exists; Metallic discolouration inside Volumetric volume (L): 5.700 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no…
Additional information: Dairy; Height-adjustable screws of the feet are missing; hand lever of the butterfly valve is missing; Manhole cover not suitable for an operating pressure of 2 bar (vessel was probably operated without pressure by the previous operator and the cover was replaced accordingly); bump at the insulation jacket; Functionality of the double jacket not checked Volumetric volume (L):…
Additional information: Pharmacy (liquids; not hazardous to health); Test pressure: 1.5 bar; Test temperature: 127 ° C .; 1 step on the outside of the tank; 1 head hole diameter 300 mm in the top bottom; 2 welded brackets inside; small dents in the insulation jacket Volumetric volume (L): 310 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar…
Additional information: Textile industry; Wall thickness of the bottom at the manhole: 4 mm; Wall thickness of the other bottom: 3 mm; insulation partly no longer complete; Insulating jacket partially detached or no longer completely; bump at the insulation jacket Volumetric volume (L): 21.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal…
Additional information: Dairy; Manhole diameter 480 mm; smaller dents in the insulation jacket; Insulated cover of the lower botton with a plate made of Fe; cut off stainless steel parts on the outside of the tank (see photos); smaller dents in the feet; height-adjustable screws of the feet made of plastic; some residues of previous content Volumetric volume (L): 1.100…
Additional information: Pharmaceutical chemistry; Support ring made of Fe; Sheet metal cut offs in the insulating jacket; the original manhole cover is no longer available (a similar manhole cover is loose, see photos); with 1 connection the enamel layer is slightly flaked off in places (see photos) Volumetric volume (L): 8.250 L Pressure in tank: pressure and vacuum Max. pressure…
Additional information: Pharmaceutical chemistry; 2 support brackets made of Aisi 304 (contact surface the other way around; see photos); flanges partly made of Fe; heating connections cut off; smaller sheet metal cutouts in the insulation jacket; some residues of previous content; dents at the insulation jacket Volumetric volume (L): 1.345 L Pressure in tank: pressure and vacuum Max. pressure (Bar):…
Additional information: Pharmaceutical Chemistry; 3 support brackets made of Fe; half-coil around the lower cylinder area; 1 heating connection probably slightly bent; bump at the insulation jacket; manhole cover plated Volumetric volume (L): 3.532 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS…
