-
- tanks
8800 liter tank in Stainless 304
- 70 000 SEK /st exkl moms
- Additional information: Wine storage; 1 manhole approx. 325 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves (screwed on to reduce the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; walls curved outwards; small dents in the front bottom possible;…
- Add to cart
-
- tanks
6200 liters tank in Stainless 304
- 109 000 SEK /st exkl moms
- Volumetric volume (L): 6,200 L Pressure in tank: pressure Max. pressure (Bar): 8 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: cylinder Outlet of tank:…
- Add to cart
-
- tanks
30000 liters tank in Stainless 304
- 198 000 SEK /st exkl moms
- Additional information: Dairy; Manhole approx. 345 x 445 mm; height-adjustable dome screws of the feet missing; bump at the insulation jacket; manhole cover is missing; pipe end cut flush Volumetric volume (L): 30,000 L Pressure in tank: ATM - atmospheric Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation:…
- Add to cart
-
- tanks
10000 liters tank in Stainless 304
- 100 000 SEK /st exkl moms
- Additional information: food industry Volumetric volume (L): 10,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position of manway: headside Outlet of…
- Add to cart
-
- tanks
300 liter tank in Stainless 304
- 58 000 SEK /st exkl moms
- Article type: second-hand storage tank Additional information: Some of the closures for the manway are missing. Special flange on the outlet, we can adjust this to a connection of your choice, this costs €474. We can modify the tank for you, contact us without obligation for your quote. Volumetric volume (L): 300 L Ra inner weld: 0,80 Pressure in tank:…
- Add to cart
-
- tanks
550 liter tank in stainless steel 304
- 26 000 SEK /st exkl moms
- Additional information: Wine storage; 1 manhole approx. 300 x 400 mm in the front base; 1 screwed-on outlet fitting with disc tap enlarges the outlet to DN 50 DIN 11851; remnants of 2 cut-off stainless steel parts on the outside of the cylinder (see photos) Volumetric volume (L): 550 L Pressure in tank: ATM - atmospheric Material wet parts: SS…
- Add to cart
-
- tanks
2500 liter tank in Stainless 304
- 51 000 SEK /st exkl moms
- Additional information: Pharmaceutical chemistry; 3 claws, stainless steel 304; manhole flange made of Fe; some residues of previous content Volumetric volume (L): 2,500 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration…
- Add to cart
-
- tanks
3000 liter tank in 304 stainless steel
- 55 000 SEK /st exkl moms
- Additional information: Chemistry; Partly small dents Volumetric volume (L): 3,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: headside…
- Add to cart
-
- tanks
7000 liter tank in Stainless 304
- 120 000 SEK /st exkl moms
- Article type: second-hand mixing tank Additional information: we can't give any guarantees about the agitator Volumetric volume (L): 7,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: conical Shape of tank: cylindrical Bottom type: conical Total discharge: yes Fixation points:…
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 26 000 SEK /st exkl moms
- Additional information: Brewery; Presumably 1 spray head inside each tank Volumetric volume (L): 1,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no…
- Add to cart
-
- tanks
1300 liter tank in Stainless 304
- 30 000 SEK /st exkl moms
- Additional information: Spirits; Manhole approx. 340 x 435 mm; height-adjustable screws of the feet missing; dents in the upper bottom and transition cylinder/upper bottom (excess pressure) Volumetric volume (L): 1,300 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 43 000 SEK /st exkl moms
- Article type: second-hand pressure tank Additional information: Duotank 2016; Previous product was beer Volumetric volume (L): 1,000 L Pressure in tank: pressure Design pressure (Bar): 4.30 Bar Max. pressure (Bar): 3 Bar Max. temperature (°C): 30 °C Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical…
- Add to cart
-
- Newly manufactured tanks, tanks
5000 liter tank in 304 stainless steel
- 150 000 SEK /st exkl moms
- Discover the 5000 liter stainless steel 304 tank - a robust solution for industry. With a capacity of 5000 liters, made in Stainless 304, brand new, model Vertical ensures efficient and safe operation. A smart choice for your business.
- Add to cart
-
- tanks
15000 liters tank in Stainless 304
- 77 000 SEK /st exkl moms
- Additional information: 4 claws made of Fe; cone height approx. 1,400 mm; 2 open connections in the cylinder (see photos); sketch available; some residues of previous content Volumetric volume (L): 15.000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
- Add to cart
-
- tanks
1023 liter tank in Stainless 304
- 77 000 SEK /st exkl moms
- Additional information: Frame Fe (galvanized) Volumetric volume (L): 1.023 L Pressure in tank: ATM - atmospheric Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): galvanized steel Documents included: no Technical drawing included: no Registration plate on the tank: yes…
- Add to cart
-
- tanks
125000 liters tank in Stainless 304
- 342 000 SEK /st exkl moms
- Additional information: Food; dents at the insulation jacket Volumetric volume (L): 125,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position of…
- Add to cart
-
- tanks
32300 liters tank in Stainless 304
- 429 000 SEK /st exkl moms
- Additional information: Sterile tank in a dairy; Double jacket with trickle ring - only suitable for unpressurized tempering; dents in the double jacket in the area of the support timbers; maximum temperature for sterilization in the inner tank 145° C; specified total height according to drawing; 1 former connection in the upper bottom was welded shut by the previous operator…
- Add to cart
-
- tanks
270 liter tank in 304 stainless steel
- 37 000 SEK /st exkl moms
- Additional information: Pharmacy; Slight metallic discoloration inside the vessel Volumetric volume (L): 270 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position…
- Add to cart
-
- tanks
7400 liter tank in Stainless 304
- 69 000 SEK /st exkl moms
- Additional information: Wine storage; 1 manhole approx. 325 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves (screwed on to reduce the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; walls curved outwards; Total height including end of plastic tube…
- Add to cart
-
- Newly manufactured tanks, tanks
10000 liter tank in Acid-proof 316
- 198 000 SEK /st exkl moms
- 10000 liters tank in Syrafast 316 is a reliable tank for industrial needs. It is 10000 liters capacity, made of Syrafast 316, brand new, model Vertical and provides minimal maintenance level. Order easily online today.
- Add to cart
-
- tanks
4000 liter tank in 304 stainless steel
- 93 000 SEK /st exkl moms
- Additional information: Manhole diameter approx. 510 mm; 4 round openings and 1 additional small opening in the lower section; the seam of the insulation jacket has come slightly loose in one place (see photos) Volumetric volume (L): 4,000 L Pressure in tank: ATM - atmospheric Max. temperature (°C): 120 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration:…
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 49 000 SEK /st exkl moms
- item available on order Article type: brand new palletized transport tank (not ADR) - type IBC-PL Additional information: We can take more containers in production for you. These standardized PL IBC containers (EW10.008V4N) that we offer from our inventory are suitable for food use. The tanks have a butterfly valve instead of a ball valve. Volumetric volume (L): 1,000 L Max.…
- Add to cart
-
- tanks
110000 liters tank in Stainless 304
- 463 000 SEK /st exkl moms
- Additional information: Food; Access ladder included Volumetric volume (L): 110,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: no Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: cylinder…
- Add to cart
-
- tanks
40000 liters tank in Stainless 304
- 226 000 SEK /st exkl moms
- Additional information: Food Volumetric volume (L): 40,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: pipe end Ø appr.…
- Add to cart
-
- tanks
7000 liter tank in Stainless 304
- 195 000 SEK /st exkl moms
- Additional information: Food; including loose base frame (see pictures) Volumetric volume (L): 7,000 L Pressure in tank: ATM - atmospheric Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 150 L Max Overpressure: 3 Bar Max. working temperature: 90…
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 24 000 SEK /st exkl moms
- Additional information: Cosmetics; Hand lever of the outlet fitting no longer available Volumetric volume (L): 1,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for…
- Add to cart
-
- tanks
1300 liter tank in Stainless 304
- 205 000 SEK /st exkl moms
- Additional information: Biopharma; 3 specially made feet are included Volumetric volume (L): 1,300 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 135 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 13 L Max Overpressure: 10 Bar…
- Add to cart
-
- tanks
15000 liters tank in Stainless 304
- 288 000 SEK /st exkl moms
- Additional information: Both manhole covers available; the access ladder, drip tray and agitator are optionally available at an extra charge. Vessels are cleaned inside and out before delivery. Volumetric volume (L): 15.000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge:…
- Add to cart
-
- tanks
500 liter tank in 304 stainless steel
- 16 000 SEK /st exkl moms
- Article type: second-hand transport tank Volumetric volume (L): 500 L Pressure in tank: pressure Design pressure (Bar): 1.43 Bar Max. pressure (Bar): 0,50 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type:…
- Add to cart
-
- tanks
2000 liter tank in 304 stainless steel
- 76 000 SEK /st exkl moms
- Additional information: Brewery; Different manufacturers, therefore slight differences in design possible; cooling system, consisting of a cooling line, which is attached over the entire length of the tank; tanks are loose in a bolted stainless steel 304 frame (only sold as a package of 2 (2 x 1,000 liters)); 1 manhole in the front base; type plates not available on…
- Add to cart
-
- tanks
300 liter tank in Stainless 304
- 48 000 SEK /st exkl moms
- Article type: second-hand storage tank Additional information: The casters and some of the closures for the manway are missing. Special flange on the outlet, we can adjust this to a connection of your choice, this costs €474. We can modify the tank for you, contact us without obligation for your quote. Volumetric volume (L): 300 L Ra inner weld: 0,80…
- Add to cart
-
- tanks
4500 liter tank in Stainless 304
- 119 000 SEK /st exkl moms
- Additional information: Milk; Double jacket with trickle ring - suitable for unpressurized temperature control; a rectangular plate was cut out of the double jacket (this plate is inside the tank; see photos); former connections partially cut off or welded shut Volumetric volume (L): 4,500 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical…
- Add to cart
-
- tanks
2400 liter tank in Stainless 304
- 60 000 SEK /st exkl moms
- Additional information: Brewery; Manhole approx. 345 x 455 mm; 1 dent in the iso jacket (see photos); some residues of previous content Volumetric volume (L): 2,400 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on…
- Add to cart
-
- tanks
1027 liter tank in Stainless 304
- 42 000 SEK /st exkl moms
- Additional information: Beer storage; Tanks are loose in stainless steel 304 racks, which are screwed into each other in pairs; 1 hand hole each approx. 215 x 240 mm in the front base (plastic hand hole cover); 1 pipe inside; 2 tanks outlet pipe diameter inside approx. 44 mm, 1 tank outlet pipe diameter inside approx. 35 mm, the outlet…
- Add to cart
-
- tanks
1700 liter tank in Stainless 304
- 37 000 SEK /st exkl moms
- Additional information: fruit juice; Manhole diameter: approx. 395 mm; ; some residues from previous contents; lime residues Volumetric volume (L): 1,700 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on…
- Add to cart
-
- tanks
7500 liter tank in Stainless 304
- 71 000 SEK /st exkl moms
- Article type: second-hand mixing tank Additional information: The legs of the tank have been cut off and are supplied separately, please look carefully at the photos.we can't give any guarantees about the agitator Volumetric volume (L): 7,500 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 17 000 SEK /st exkl moms
- Article type: second-hand transport tank Volumetric volume (L): 1,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: flat Shape of tank: rectangular Bottom type: flat sloping Total discharge: yes Fixation points: 4 stackable frame Manway(s): RVS 304 Gasket manway(s): unknown…
- Add to cart
-
- tanks
140000 liters tank in Stainless 304
- 612 000 SEK /st exkl moms
- Additional information: Plant-based oil; Cylinder wall thickness: 4-5 mm; vegetable oil residues are still inside the vessels; some residues of previous content Volumetric volume (L): 140,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
- Add to cart
-
- tanks
640 liter tank in 304 stainless steel
- 39 000 SEK /st exkl moms
- Article type: second-hand storage tank Volumetric volume (L): 640 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
- Add to cart
-
- tanks
16500 liters tank in Stainless 304
- 233 000 SEK /st exkl moms
- Additional information: Vegetable fat tank in an ice cream factory; Heating coil around approx. half the cylinder height and the lower base; iso jacket around the entire vessel (1 vessel with smaller bumps in the iso jacket); some residues of previous content; pipe end cut flush Volumetric volume (L): 16,500 L Pressure in tank: ATM - atmospheric Max. temperature (°C):…
- Add to cart
-
- tanks
9140 liter tank in Stainless 304
- 137 000 SEK /st exkl moms
- Additional information: Processing of wool fat; Maximum operating pressure heating coil 35 bar; 3 claws, Fe; manhole diameter approx. 490 mm; several external parts made of Fe, e.g. manhole cover flange and insulating rings around the cylinder; pipe end cut flush Volumetric volume (L): 9.140 L Pressure in tank: vacuum Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C…
- Add to cart
-
- tanks
30000 liters tank in Stainless 304
- 179 000 SEK /st exkl moms
- Additional information: 2 loose bearing shells each made of Fe (galvanized); 1 manhole each approx. 350 x 445 mm in the front base; stronger dents in each cylinder Volumetric volume (L): 30,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
- Add to cart
-
- tanks
1070 liters tank in Stainless 304
- 43 000 SEK /st exkl moms
- Additional information: Food additives; Frame, Fe (galvanized; frames partially slightly bent and with slight signs of corrosion, especially in the outlet area); Thermoplate, Aisi 304 for heating/cooling around the lower bottom and over half the cylinder height; small dents in the bottom of the inner container (overpressure heating jacket); smaller dents in the insulating jacket (at least 1 container with…
- Add to cart
-
- tanks
10000 liters tank in Stainless 304
- 300 000 SEK /st exkl moms
- Additional information: Dairy; 1 vessel with 1 dent in the isomantel in the area of the upper bottom (see photos); pipe end cut flush Volumetric volume (L): 10,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max…
- Add to cart
-
- tanks
15600 liters tank in Stainless 304
- 152 000 SEK /st exkl moms
- Additional information: Pet food; Diameter manhole approx. 510 mm; 1 x outlet flange diameter pipe inside 80 mm, 1 x threaded outlet diameter pipe inside approx. 150 mm; 1 lateral agitator was welded into the lower cylinder area by the previous operator; the heating coil may have been damaged in the process; insulation was screwed over the heating connections of…
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 44 000 SEK /st exkl moms
- Additional information: Pharmacy; Fame, Fe (galvanized); 1 container with small dents inside the container, the other container with dents inside and in the insulation jacket; According to the manufacturer, the double jacket can be operated at up to 6.0 bar at 120 °C (Behälter KG does not guarantee this, as it is not noted in the drawing)."; some residues of…
- Add to cart
-
- tanks
8651 liter tank in Stainless 304
- 198 000 SEK /st exkl moms
- Additional information: Chemistry; Support ring made of Fe; manhole diameter approx. 480 mm; total height incl. agitator gearbox (without gearbox approx. 3500 mm); ; motor is missing; manhole cover plated Volumetric volume (L): 8.651 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS…
- Add to cart
-
- tanks
17200 liters tank in Stainless 304
- 213 000 SEK /st exkl moms
- Additional information: color industry; Outlets partially deflected; 1 vessel (internal no. 7083-2) with 1 dent in the cylinder; some residues of previous content Volumetric volume (L): 17,200 L Pressure in tank: ATM - atmospheric Max. temperature (°C): 100 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
- Add to cart
-
- tanks
5000 liter tank in 304 stainless steel
- 91 000 SEK /st exkl moms
- Additional information: Dairy; Bottom cover of the isomantle partly made of Fe (see photos); 1 strong dent in the isomantle Volumetric volume (L): 5,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the cylinder:…
- Add to cart
-
- tanks
500 liter tank in 304 stainless steel
- Be om offert
- Article type: second-hand mixing tank Additional information: V-mixer make GLATT in stainless steel model K with a volume of 500 liters. Unloading with manual butterfly valve.; we can't give any guarantees about the agitator Volumetric volume (L): 500 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation:…
- Add to cart
-
- tanks
22000 liters tank in Stainless 304
- 214 000 SEK /st exkl moms
- Article type: second-hand storage tank Additional information: Small dent on the bottem of the decorative jacket. See pictures; we can't give any guarantees about the heating/cooling jacket Volumetric volume (L): 22,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Top…
- Add to cart
-
- tanks
2440 liters tank in Stainless 304
- 40 000 SEK /st exkl moms
- Additional information: Fragrance production (alcoholic scents); 2 loose height-adjustable bearing shells made of stainless steel 304; 1 manhole approx. 345 x 440 mm in the front floor; partially 1 crane eye on top of the tank; inside length: approx. 2,580 mm; inside width: approx. 720 mm; inside height: approx. 1,470 mm; total height as shown in photo (not including unscrewed…
- Add to cart
-
- tanks
7085 liter tank in Stainless 304
- 63 000 SEK /st exkl moms
- Additional information: Paint industry; Vessel made of mild steel, internally clad with stainless steel 304 (1.4541); manhole diameter 520 mm; protective coating on the outside of the vessel; heavier build-up inside the vessel Volumetric volume (L): 7.085 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
- Add to cart
-
- tanks
12000 liters tank in Stainless 304
- 132 000 SEK /st exkl moms
- Additional information: Sorbitol tank in the food industry; 1 partition wall (with openings) in the middle of the vessel divides the cylinder length of 5000 mm into 2 x 2,500 mm; lower area in the inner vessel straight instead of round due to the design; both vessel chambers with a 450 mm diameter manhole; 1 chamber with a DN 65…
- Add to cart
-
- tanks
3340 liters tank in Stainless 304
- 126 000 SEK /st exkl moms
- Article type: second-hand pressure tank Volumetric volume (L): 3.340 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Min. pressure (Bar): -1 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: dished Total discharge: yes Fixation points: 3 adjustable…
- Add to cart
-
- tanks
650 liter tank in 304 stainless steel
- 89 000 SEK /st exkl moms
- Additional information: pharmacy; Metallic discoloration inside Volumetric volume (L): 650 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Max. temperature (°C): 170 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 8 Bar Max. working temperature: 170 °C Type HE…
- Add to cart
-
- tanks
1195 liter tank in Stainless 304
- 169 000 SEK /st exkl moms
- Additional information: Designed as a storage tank for beer Volumetric volume (L): 1.195 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 2 L Max Overpressure: 6 Bar Max.…
- Add to cart
-
- tanks
4000 liter tank in 304 stainless steel
- 83 000 SEK /st exkl moms
- Article type: second-hand pressure tank Additional information: The cooling jacket is broken, the tank itself has been pressure tested to 3 bar and does not leak. The tank has some deformations at the front and one inside the tank --> look closely at the photos please. Volumetric volume (L): 4,000 L Pressure in tank: pressure Design pressure (Bar): 3 Bar…
- Add to cart
-
- tanks
50000 liters tank in Stainless 304
- 404 000 SEK /st exkl moms
- item available on order Article type: brand new storage tank - type TZN-SL Volumetric volume (L): 50,000 L Max. density P (kg/m³): 1,000 Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: conical 13 ° Shape of tank: cylindrical Bottom type: conical…
- Add to cart
-
- tanks
1030 liters tank in Stainless 304
- 22 000 SEK /st exkl moms
- Additional information: Chemistry; 4 feet made of stainless steel 304, screwed onto transport frame made of Fe (galvanized; bent in one place); manhole diameter approx. 380 mm; 1 dent in the wall (see photos); some residues of previous content; traces of usage Volumetric volume (L): 1,030 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A)…
- Add to cart
-
- tanks
72500 liters tank in Stainless 304
- 249 000 SEK /st exkl moms
- Additional information: Brewery; 6 reinforcement rings Fe with 2 feet each (Attention: tank diameter deeper than tank feet; note when setting up); manhole in front base; up to 2 additional identical vessels can be offered on request Volumetric volume (L): 72,500 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat…
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 17 000 SEK /st exkl moms
- Article type: second-hand transport tank Additional information: previous product was condensed milk Volumetric volume (L): 1,000 L Pressure in tank: pressure Max. pressure (Bar): 0,20 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: flat Shape of tank: square Bottom type: conical Bottom outlet: yes Total discharge:…
- Add to cart
-
- tanks
10000 liters tank in Stainless 304
- 150 000 SEK /st exkl moms
- Additional information: Dairy; Minor dents in the upper bottom and in the insulating jacket; pipe end cut flush Volumetric volume (L): 10,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
- Add to cart
-
- tanks
42000 liters tank in Stainless 304
- 258 000 SEK /st exkl moms
- Additional information: Food Volumetric volume (L): 42,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position of manway: headside Outlet of tank:…
- Add to cart
-
- tanks
10000 liters tank in Stainless 304
- 159 000 SEK /st exkl moms
- Additional information: food industry Volumetric volume (L): 10,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: headside Outlet of…
- Add to cart
-
- tanks
15000 liter stainless steel 304 tank (double jacketed)
- 191 000 SEK /st exkl moms
- Additional information: Safety double jacket made of stainless steel 304 around the vessel; various technical documents (in French and English); manhole DN 500 with dip pipes; tanks with (sometimes stronger) dents in the double jacket (in one tank also in the inner tank; see photos); connections for safety double jacket waved off. Volumetric volume (L): 15.000 L Pressure in tank:…
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 19 000 SEK /st exkl moms
- Additional information: paints / varnishes; Frame Fe (galvanized); Frame partly with signs of corrosion; traces of usage Volumetric volume (L): 1,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): galvanized steel Documents included: no Technical drawing included:…
- Add to cart
-
- tanks
10000 liters tank in Stainless 304
- 263 000 SEK /st exkl moms
- Additional information: Ice water; Manhole approx. 410 x 510 mm; heating connections disconnected; 3 identical tanks (motor/gear unit missing) also available (#B0218) Volumetric volume (L): 10,000 L Pressure in tank: ATM - atmospheric Max. temperature (°C): 10 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes…
- Add to cart
-
- tanks
1500 liter tank in 304 stainless steel
- 44 000 SEK /st exkl moms
- Additional information: Biochemistry; Armaflex insulation in parts of the cylinder; manhole approx. 325 x 420 mm; 3 baffles and 1 perforated pipe inside the vessel (see photos) Volumetric volume (L): 1,500 L Pressure in tank: pressure Max. pressure (Bar): 6 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no…
- Add to cart
-
- tanks
17620 liter tank in Stainless 304
- 226 000 SEK /st exkl moms
- Additional information: Dairy; Manhole diameter approx. 510 mm; height-adjustable dome screws of the feet are no longer present; 1 small pressure point in the insulating jacket; pipe end cut flush Volumetric volume (L): 17.620 L Pressure in tank: ATM - atmospheric Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 95 °C Material wet parts: SS AISI 304 (V2A) Model: vertical…
- Add to cart
-
- Newly manufactured tanks, tanks
2000 liter tank in 304 stainless steel
- 89 000 SEK /st exkl moms
- 2000 liter stainless steel 304 tank is perfect for demanding environments. It is 2000 liters capacity, made in Stainless 304, brand new, Vertical model and delivers long life over time. Ready to use directly in operation.
- Add to cart
-
- tanks
1500 liter tank in 304 stainless steel
- 24 000 SEK /st exkl moms
- Additional information: Ice-cream production; support brackets made of Aisi 304; diameter manhole 420 mm Volumetric volume (L): 1,500 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no…
- Add to cart
-
- tanks
2000 liter tank in 304 stainless steel
- 57 000 SEK /st exkl moms
- Additional information: Rinse water tank (Cip system) in a dairy; Cone height approx. 1000 mm; manhole approx. 430 mm (slightly out of round); dents in the upper bottom; insulating jacket cut open at the end of the cone bottom (see photos); some residues of previous content; bump at the insulation jacket; pipe end cut flush Volumetric volume (L): 2,000 L…
- Add to cart
-
- tanks
2000 liter tank in 304 stainless steel
- 38 000 SEK /st exkl moms
- Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (screwed on to enlarge the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; tank feet are partially slightly bent; 1 tank with several dents Volumetric volume…
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 63 000 SEK /st exkl moms
- Additional information: chemistry; handhole cover is missing Volumetric volume (L): 1,000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 26 L Max Overpressure: 1 Bar Max. working…
- Add to cart
-
- tanks
5200 liter tank in Stainless 304
- 86 000 SEK /st exkl moms
- Article type: second-hand storage tank Additional information: The agitator drive is missing Volumetric volume (L): 5,200 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: conical Shape of tank: cylindrical Bottom type: conical Total discharge: yes Fixation points: 3 non adjustable…
- Add to cart
-
- tanks
1500 liter tank in 304 stainless steel
- 122 000 SEK /st exkl moms
- Article type: second-hand pressure tank Additional information: Full vacuum -1 bar; we can't give any guarantees about the heating/cooling jacket Volumetric volume (L): 1,500 L Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -1 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no…
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 96 000 SEK /st exkl moms
- Article type: second-hand fermentation tank Additional information: The tanks have never been used; we can't give any guarantees about the heating/cooling jacket Volumetric volume (L): 1,000 L Pressure in tank: ATM - atmospheric Max. temperature (°C): 20 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
- Add to cart
-
- Newly manufactured tanks, tanks
10000 liter tank in Acid-proof 316
- 290 000 SEK /st exkl moms
- 10000 liter tank in Syrafast 316 is perfectly suited for demanding environments. It holds 10000 liters, is made of Syrafast 316 and delivers minimal maintenance levels over time. Order easily online today.
- Add to cart
-
- Newly manufactured tanks, tanks
5000 liter tank in 304 stainless steel
- 99 000 SEK /st exkl moms
- Do you need an efficient solution for industry? 5000 liters tank in Stainless steel 304 is developed for professional use and offers high reliability. With a capacity of 5000 liters, made of 304 stainless steel, ready to be used directly in operation.
- Add to cart
-
- tanks
3000 liter tank in 304 stainless steel
- 38 000 SEK /st exkl moms
- Additional information: ylinder flanged; 1 filter insert and hoses inside the tank (see photos); 1 lifting eye in the upper bottom; some residues of previous content Volumetric volume (L): 3,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
- Add to cart
-
- tanks
180 liter tank in stainless steel 304
- 37 000 SEK /st exkl moms
- Additional information: Hand hole diameter 200 mm; some residue from previous contents Volumetric volume (L): 180 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for…
- Add to cart
-
- tanks
12000 liters tank in Stainless 304
- 96 000 SEK /st exkl moms
- Article type: second-hand storage tank Additional information: The agitator drive is missing Volumetric volume (L): 12,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: conical Shape of tank: cylindrical Bottom type: conical Total discharge: yes Fixation points: 4 non adjustable…
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 34 000 SEK /st exkl moms
- Additional information: Manhole diameter: approx. 420 x 320 mm Volumetric volume (L): 1,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position…
- Add to cart
-
- tanks
102000 liters tank in Stainless 304
- 397 000 SEK /st exkl moms
- Additional information: Food / Dairy Volumetric volume (L): 102,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: cylinder Outlet…
- Add to cart
-
- tanks
36000 liters tank in Stainless 304
- 198 000 SEK /st exkl moms
- Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; total length and total height as per drawing; vessels were professionally cleaned and overhauled by the manufacturer in 2024; brand-new residual drain valves, sampling valves and manhole seals were installed. Volumetric volume (L): 36,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS…
- Add to cart
-
- tanks
2500 liter tank in Stainless 304
- 26 000 SEK /st exkl moms
- Additional information: Cosmetics; Basic dimensions inside: approx. 1,100 x 1,100 mm; wall height inside: approx. 2,150 mm; light-colored protective coating outside (no longer complete); diameter of manhole approx. 490 mm; slight differences in design, e.g. manholes and outlets; diameter of residual emptying mostly 25 mm (sometimes also 50 mm); 2 tanks without level indicator; some residues of previous content Volumetric…
- Add to cart
-
- tanks
800 liter tank in 304 stainless steel
- 19 000 SEK /st exkl moms
- Article type: second-hand storage tank Volumetric volume (L): 800 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: square Bottom type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable feet Fixation point(s): RVS…
- Add to cart
-
- tanks
11000 liters tank in Stainless 304
- 45 000 SEK /st exkl moms
- Additional information: bioethanol plant; Support ring made of Fe; manhole cover missing Volumetric volume (L): 11,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for…
- Add to cart
-
- tanks
2000 liter tank in 304 stainless steel
- 55 000 SEK /st exkl moms
- Additional information: Soap Volumetric volume (L): 2,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: available Agitator: yes
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 25 000 SEK /st exkl moms
- Article type: second-hand transport tank Additional information: Previous product was Methyl Acrylate (Cas. No. 96-33-3), the tanks are empty and cleaned; the tanks have not been used much and are in very good condition; UN marking. Volumetric volume (L): 1,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger:…
- Add to cart
-
- tanks
10700 liters tank in Stainless 304
- 186 000 SEK /st exkl moms
- Additional information: Food; Manhole (340x440 mm) in the front shelf Volumetric volume (L): 10,700 L Pressure in tank: ATM - atmospheric Max. temperature (°C): 90 °C Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank:…
- Add to cart
-
- tanks
15000 liters tank in Stainless 304
- 177 000 SEK /st exkl moms
- Additional information: Food Volumetric volume (L): 15.000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: cylinder Outlet of tank:…
- Add to cart
-
- tanks
800 liter tank in 304 stainless steel
- 12 000 SEK /st exkl moms
- Article type: second-hand transport tank Additional information: The tanks have some dents; look closely at the photos; used for various egg products. Volumetric volume (L): 800 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: flat Shape of tank: rectangular Bottom…
- Add to cart
-
- tanks
11000 liters tank in Stainless 304
- 137 000 SEK /st exkl moms
- Additional information: Fine chemistry; Stainless steel 304 ladder steps inside the tank; the base plate of 1 tank foot is slightly bent (see photos) Volumetric volume (L): 11,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no…
- Add to cart
-
- tanks
500 liter tank in 304 stainless steel
- 16 000 SEK /st exkl moms
- Article type: second-hand transport tank Volumetric volume (L): 500 L Pressure in tank: pressure Design pressure (Bar): 1.43 Bar Max. pressure (Bar): 1 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type:…
- Add to cart
-
- tanks
1000 liter tank in 304 stainless steel
- 60 000 SEK /st exkl moms
- Additional information: Cosmetics; Total height estimated (deviations possible); agitator supports may need to be shimmed for installation; diameter of outlet end approx. 35 mm; some residues of previous content Volumetric volume (L): 1,000 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
- Add to cart
-
- tanks
300 liter tank in Stainless 304
- 29 000 SEK /st exkl moms
- Article type: second-hand storage tank Additional information: The wheels, manhole flange and closures for the manhole are missing, a new lid with closures = €1900; Special flange on the outlet, we can adjust this to a connection of your choice, this costs €474. We can modify the tank for you, contact us without obligation for your quote. Volumetric volume (L):…
- Add to cart
-
- tanks
1020 liters tank in Stainless 304
- 48 000 SEK /st exkl moms
- Additional information: Beer tank; Vessel lies loose in stainless steel 304 frame; 1 manhole approx. 320 x 415 mm in front base Volumetric volume (L): 1.020 L Pressure in tank: pressure Max. pressure (Bar): 3,90 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
- Add to cart
-
- tanks
570 liter tank in 304 stainless steel
- 21 000 SEK /st exkl moms
- Additional information: Food industry; Mobile frame, Aisi 304 with 4 plastic wheels; Manhole diameter 850 mm with loose cover; slight differences in the design of the containers possible; traces of usage Volumetric volume (L): 570 L Pressure in tank: ATM - atmospheric Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
- Add to cart




































































































































































