Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
item available on order Article type: brand new pressure tank - type OTP-SC Volumetric volume (L): 50 L Max. density P (kg/m³): 1.200 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 3 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical…
Additional information: Pharmacy; Double tank (2 x 30 liter); mobile frame, Aisi 304 with 4 plastic wheels Volumetric volume (L): 60 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no…
Additional information: Trolley not available for all tanks; 1 tank with a smaller dent; the details of total length, width and height refer to tank including trolley (total height without trolley 850 mm) Volumetric volume (L): 80 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model:…
Additional information: Pharmacy; Attention: Type plate only available for 1 vessel (we assume that the operating pressure of 5 bar (air) is the same or similar for the second vessel, but have no proof of this); chassis, stainless steel 304; diameter of hand hole approx. 140 mm; on 1 vessel, the outer protective ring is slightly dented Volumetric volume (L):…
Additional information: Pharmacy; Mobile frame, Aisi 304; Lid clamping ring is missing Volumetric volume (L): 120 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 16 L Max…
Additional information: Diameter of hand hole approx. 150 mm; dip tubes inside the tanks; some minor dents Volumetric volume (L): 130 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no Documents included:…
item available on order Article type: brand new pressure tank - type OTP-SC Volumetric volume (L): 150 L Max. density P (kg/m³): 1.200 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 3 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical…
Volumetric volume (L): 150 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Max. temperature (°C): 70 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 1,50 Bar Max. working temperature: 80 °C Type HE on the bottom: heating/cooling jacket Type…
Article type: second-hand pressure tank Additional information: The tanks have never been used. Volumetric volume (L): 185 L Pressure in tank: pressure Max. pressure (Bar): 6 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Solvents; Manufacturer's description available; No bottom outlet Volumetric volume (L): 204 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no Documents included: no Technical drawing included: no Registration plate on…
Article type: brand new production tank Volumetric volume (L): 210 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: pressure Design pressure (Bar): 1,90 Bar Max. pressure (Bar): 1,10 Bar Min. pressure (Bar): -0,04 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A)…
Article type: second-hand pressure tank Additional information: we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 230 L Pressure in tank: pressure Material wet parts: SS AISI 304L (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: strong conical Bottom outlet: yes…
Article type: second-hand pressure tank Additional information: Top lid is missing, a new lid = 650 €. There are two connections provided with 2 inch internal thread for mounting 2 immersion resistors with an insertion length of 500mm, the immersion resistors themselves are not included. Volumetric volume (L): 250 L Pressure in tank: pressure Design pressure (Bar): 5,20 Bar Max.…
item available on order Article type: brand new pressure tank - type CCT-ES-HL Volumetric volume (L): 260 L Max. density P (kg/m³): 1.400 Finish stainless steel: pickled Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 304L (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no…
Additional information: steel alloys; cone height approx. 1200 mm; hand hole approx. 220 x 315 mm; hand hole collar and hand hole cover made of Fe; the hand hole cover is missing for 1 tank; fastenings of the hand hole covers of the other tanks are incomplete; some residues of previous content Volumetric volume (L): 265 L Pressure in tank:…
Additional information: Biochemistry; Diameter of hand hole approx. 260 mm (hand hole lid plated); adhesions and metallic discoloration inside the vessel Volumetric volume (L): 270 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no…
Article type: second-hand pressure tank Volumetric volume (L): 280 L Pressure in tank: pressure Design pressure (Bar): 3,80 Bar Max. pressure (Bar): 2,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Shape of tank: cylindrical Bottom type: dished Total discharge: yes Fixation points: 3 adjustable feet Outer jacket…
Additional information: Pharmazie; inkl. Pumpe und UV-Reaktor Volumetric volume (L): 295 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 9 L Max Overpressure: 3 Bar Max. working temperature:…
Additional information: Pharmacy (liquids; not hazardous to health); Test pressure: 1.5 bar; Test temperature: 127 ° C .; 1 step on the outside of the tank; 1 head hole diameter 300 mm in the top bottom; 2 welded brackets inside; small dents in the insulation jacket Volumetric volume (L): 310 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar…
Additional information: chemistry; 3-footed frame, Fe (lacquered; 1 foot shortened); clamp srews, Fe (with corrosion); some residues of previous content Volumetric volume (L): 313 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume:…
Additional information: Pharmacy; Mobile Frame, AISI 304 (the control cabinet boxes shown in the photos are empty); smaller dents inside the tanks; Upper bottoms, Aisi 304 (hangings and fastening screws of the upper bottoms are missing); pipe end cut flush; Metallic discolouration inside Volumetric volume (L): 313 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C):…
item available on order Article type: brand new storage tank - type K3-H12S-L Volumetric volume (L): 340 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -0,60 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI…
Additional information: plastics industry; stronger adhesions inside; working pressure according to drawing (type plate not available); various changes of the connections by the former operator (not shown in the drawing); foot frame, 304 Volumetric volume (L): 396 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger…
Article type: second-hand mixing tank Additional information: Both were never used because the startup company never started actual production. This combination is ideal for producing a wide range of liquids/liquids with powders/thickeners, such as eggnog, hair gel, pharmaceutical creams, lip gloss, polymers, adhesives, praline, sauces, mayonnaise, etc. The seal is suitable for pressure applications, for example, to empty the contents…
Additional information: Pharmacy; Mobile tilting tank (mobile frames made of mild steel (lacquered), tilting frame made of 1.4541 (304)); no outlet in the lower bottom; manhole diameter approx. 390 mm; 2 sight glasses in the upper bottom or in the manhole cover are missing Volumetric volume (L): 440 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Material wet…
item available on order Article type: brand new pressure tank - type BBT-ES-SL Volumetric volume (L): 500 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Pressure in tank: pressure Design pressure (Bar): 3,40 Bar Max. pressure (Bar): 2 Bar Max. temperature (°C): -10 °C Min. temperature (°C): 130 °C Material wet parts: SS AISI 316L (V4A) Model: vertical…
item available on order Article type: brand new pressure tank - type BBT-ES-SL Volumetric volume (L): 500 L Ra inner weld: 0,80 Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Article type: second-hand transport tank Volumetric volume (L): 500 L Pressure in tank: pressure Max. pressure (Bar): 0,25 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: conical Shape of tank: square Bottom type: flat sloping Total discharge: yes Fixation points: 4 non adjustable feet Suitable for…
Additional information: Pharmacy; Slight differences in the design of the vessels; differences in the connections in the manhole cover; overall height slightly lower in some cases (depending on the connections in the manhole cover) Volumetric volume (L): 500 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat…
item available on order Article type: brand new pressure tank - type OTP-SC Volumetric volume (L): 500 L Max. density P (kg/m³): 1.200 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 3 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical…
Additional information: Brewery; Tanks loose on frames, Aisi 304 (different versions of the frames, some screwed together; see photos); 1 hand hole each approx. 190 x 240 mm in the front bottom (plastic hand hole cover) Volumetric volume (L): 500 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: Brewery; Tanks loose on frames, Aisi 304 (different versions of the frames, some screwed together; see photos); 1 hand hole each approx. 190 x 240 mm in the front bottom (plastic hand hole cover) Volumetric volume (L): 500 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: Pharmacy Volumetric volume (L): 500 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: headside…
Additional information: Vessel currently bolted to an aluminum frame Volumetric volume (L): 507 L Pressure in tank: pressure Max. pressure (Bar): 6,60 Bar Max. temperature (°C): 180 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 2 L Max Overpressure: 6 Bar Max.…
Additional information: Pharmacy Volumetric volume (L): 550 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 135 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 67 L Max Overpressure: 2 Bar Max. working temperature: 135 °C Type HE…
Additional information: Pharmacy; Heating coil approx. 5 turns; slight metallic discoloration inside Volumetric volume (L): 554 L Pressure in tank: pressure Max. pressure (Bar): 2,50 Bar Max. temperature (°C): 138 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 2,50 Bar Documents included: no Technical drawing included: no Registration plate on…
Additional information: Brewery; Manhole appr. 305 x 440 mm Volumetric volume (L): 570 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 1,50 Bar Type HE on the cylinder: half pipe welded onto…
Additional information: pharmacy; The vessel was originally mobile on 4 plastic rollers, these are no longer available; For installation, the rollers would either have to be replaced on site or the feet would have to be set higher accordingly, as the lower bottom / outlet extends beyond the foot end; dents at the insulation jacket; scratches inside Volumetric volume (L):…
Additional information: pharmacy; metallic discolourations inside Volumetric volume (L): 650 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Max. temperature (°C): 170 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 8 Bar Max. working temperature: 170 °C Type HE…
item available on order Article type: brand new fermentation tank - type CCT-HL Additional information: Included in the price: cip spraybol, thermometer, sample valve. In option: butterfly valve, airlock (see options); Ra=<0.8µm Volumetric volume (L): 710 L Max. density P (kg/m³): 1.050 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max.…
Additional information: Biochemistry; 1 manhole diameter 400 mm in the front base; some residues of previous content; manhole cover plated Volumetric volume (L): 715 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: chemistry; 3 support brackets Fe; screws of the upper bottom flange are mostly missing; motor-/gear is missing Volumetric volume (L): 720 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no…
item available on order Article type: brand new pressure tank - type CCT-HIL Additional information: Ra=<0.8µm Volumetric volume (L): 730 L Max. density P (kg/m³): 1.050 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: pressure Design pressure (Bar): 3,30 Bar Max. temperature (°C): 30 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A)…
Additional information: pharmacy; upper bottom made of Aisi 304 (1.4541); metallic discolourations inside; manhole in the upper bottom diameter 350 mm; some residues of previous content; dents at the insulation jacket Volumetric volume (L): 750 L Pressure in tank: pressure Max. pressure (Bar): 2,50 Bar Max. temperature (°C): 135 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile…
item available on order Article type: brand new transport tank Volumetric volume (L): 750 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Pressure in tank: pressure Design pressure (Bar): 3,40 Bar Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): 10 °C Material wet parts: SS AISI 304 (V2A)…
Additional information: Food industry; Inner tank in "funnel shape"; manhole diameter approx. 410 mm; tank screwed onto 3 load cells each in a 4-legged frame Volumetric volume (L): 750 L Pressure in tank: pressure Max. pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes…
Article type: second-hand transport tank Volumetric volume (L): 800 L Pressure in tank: pressure Design pressure (Bar): 2,70 Bar Max. pressure (Bar): 1,70 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type:…
Additional information: food industry; minor dents and slight adhesions possible; Manhole is fastened with a clamping ring; various connection designs in the upper bottom; some residues of previous content; traces of usage Volumetric volume (L): 800 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 120 °C Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: some residues of previous content; traces of usage Volumetric volume (L): 800 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange…
Additional information: Herbal pharmacy; Attention: outlet fitting extends beyond foot ends (former foot extensions are no longer available); Screws of the outlet fitting are missing; some residues of previous content Volumetric volume (L): 800 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated…
Article type: second-hand transport tank Additional information: previous product was condensed milk Volumetric volume (L): 800 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 120 °C Min. temperature (°C): -20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of…
Article type: second-hand transport tank Additional information: previous product was condensed milk Volumetric volume (L): 800 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: dished…
item available on order Article type: brand new palletized transporttank (for ADR) - type IBC-PL0 Additional information: The standardised PLO IBC containers which we offer from our stock are not applicable for food use! Volumetric volume (L): 995 L Max. density P (kg/m³): 1.900 Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): 0,02 Bar Material wet…
item available on order Article type: brand new palletized transporttank (not ADR) - type IBC-AZ/F1 Additional information: This is a palletized container: design pressure -0.15/+2 bar; operational pressure +0.49 bar. We can take more containers in production for you. Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.600 Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure…
Article type: brand new pressure tank - type CCT-ES-HL Additional information: PED 2014/68/EU DIN EN 10028-1 & DIN EN 10028-7 Volumetric volume (L): 1.000 L Finish stainless steel: pickled Pressure in tank: pressure Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed…
Article type: brand new transport tank - type IBC-ES-EC Additional information: This is an aseptic container. Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Finish stainless steel: pickled Pressure in tank: pressure Design pressure (Bar): 3,40 Bar Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material…
item available on order Article type: brand new transport tank Additional information: UN31A/Y transportation hazardous liquids, packing groups II adn III, RID ADR Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.500 Ra inner weld: 1,60 Pressure in tank: pressure Max. pressure (Bar): 0,10 Bar Min. pressure (Bar): 0,10 Bar Max. temperature (°C): 50 °C Material wet parts: SS…
item available on order Article type: brand new transport tank Additional information: GGVSEB / GGVSea / ADR / RID / IMDG-Code Volumetric volume (L): 1.000 L Max. density P (kg/m³): 2.100 Pressure in tank: pressure Max. pressure (Bar): 0,20 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top…
Additional information: transport containers for glue; partially slight differences in design; total height 1800 - 1960 mm; partially drawing available; some residues of previous content; dents at the insulation jacket; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger:…
Additional information: Brewery; Tanks screwed into frame, Aisi 304; 1 hand hole diameter approx. 350 mm in the front base (hand hole cover made of plastic) Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Beer tanks; 1 hand hole approx. 190 x 240 mm in the front bottom (hand hole cover made of plastic); 2 loose foot frames, Aisi 304 (2 different versions of the foot frames, as the previous operator's tanks were stored on top of each other); total height depending on the design of the foot frame approx. 1,000 -…
Additional information: chemistry; handhole cover is missing Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 26 L Max Overpressure: 1 Bar Max. working…
Additional information: Brewery; Tanks screwed into frame, Aisi 304; 1 hand hole diameter approx. 350 mm in the front base (hand hole cover made of plastic) Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
item available on order Article type: brand new transport tank Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Pressure in tank: pressure Design pressure (Bar): 3,40 Bar Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A)…
Additional information: Pharmazie; Durchmesser Mannloch ca. 385 mm; 2 stärkere Beulen im Übergang des Zylinders zu den Böden; leichter Korrosionsansatz im Inneren des Containers Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Article type: second-hand transport tank Additional information: the tanks have light dents and signs of use; here and there a screw is missing for the manhole; 1 tank is missing a butterfly valve; not all tanks still have a nameplate; please look carefully at the photos; the tanks come from cosmetics Volumetric volume (L): 1.000 L Pressure in tank: pressure…
Article type: second-hand pressure tank Additional information: Duotank 2016; Previous product was beer Volumetric volume (L): 1.000 L Pressure in tank: pressure Design pressure (Bar): 4,30 Bar Max. pressure (Bar): 3 Bar Max. temperature (°C): 30 °C Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical…
Additional information: Pharmacy; 1 screw connection of the manhole cover damaged Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 97 L Max Overpressure: 2…
Article type: second-hand transport tank Additional information: previous product was condensed milk Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 0,20 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: flat Shape of tank: square Bottom type: conical Bottom outlet: yes Total discharge:…
Article type: second-hand pressure tank Additional information: Tank has a dent, please look carefully at the pictures. Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: dished…
Additional information: Food; DN 100 hand hole in the upper bottom (in some cases the union nut is missing); small dents possible in some places Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Article type: second-hand pressure tank Additional information: There are a total of 6 tanks available, 2 are without lids (see photos). Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank:…
Additional information: Putty; Frame, Aisi 304; Manhole diameter approx. 410 mm; 1 filling tube inside the container; some residues of previous content; traces of usage Volumetric volume (L): 1.011 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: Beer tank; Tank lies loosely in a frame, Aisi 304; 1 manhole approx. 320 x 415 mm in the front bottom Volumetric volume (L): 1.020 L Pressure in tank: pressure Max. pressure (Bar): 3,90 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Brewery; Cooling system, consisting of a copper pipe that is attached over the entire length of the tank; different manufacturers, therefore slight differences in the design (e.g. the tank from the manufacturer Müller has a different frame and different pressure levels to the other two tanks, see photos) Volumetric volume (L): 1.020 L Pressure in tank: pressure Max.…
Additional information: Beer storage; Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inner pipe diameter approx. 44 mm, 1 tank outlet inner pipe diameter approx. 35 mm, for one tank…
Additional information: Beer tank; Loose frame, Aisi 304; 1 hand hole approx. 230 x 235 mm in the front bottom (hand hole cover made of plastic); 1 pipe inside the tank Volumetric volume (L): 1.027 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation:…
item available on order Article type: brand new pressure tank - type BBT-ES-SL Volumetric volume (L): 1.050 L Max. density P (kg/m³): 1.200 Finish stainless steel: pickled Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of…
Additional information: Brewery; Tanks loose - frame no longer present; 1 manhole diameter approx. 400 mm in the front bottom (manhole cover fastening screws damaged) Volumetric volume (L): 1.050 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: Designed as a fermentation tank for beer; fair tank - slight signs of wear; yeast plug mounted inside Volumetric volume (L): 1.100 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no…
Article type: second-hand transport tank Additional information: Previous product was Methyl Acrylate (Cas. No. 96-33-3), the tanks are empty and cleaned; the tanks have not been used much and are in very good condition; UN marking. Volumetric volume (L): 1.100 L Pressure in tank: pressure Max. pressure (Bar): 0,30 Bar Min. pressure (Bar): 0,05 Bar Material wet parts: SS AISI…
Additional information: brewery; some residues of previous content Volumetric volume (L): 1.125 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator:…
Additional information: Cosmetics; Stainless steel 304 frame; traces of usage Volumetric volume (L): 1.140 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Max. temperature (°C): 95 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Designed as a storage tank for beer Volumetric volume (L): 1.175 L Pressure in tank: pressure Max. pressure (Bar): 2,50 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 7 L Max Overpressure: 3 Bar…
Additional information: Beverage industry; some residues of previous content Volumetric volume (L): 1.178 L Pressure in tank: pressure Max. pressure (Bar): 4 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for…
Additional information: Designed as a storage tank for beer Volumetric volume (L): 1.195 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 2 L Max Overpressure: 6 Bar Max.…
Additional information: Druckgeräterichtlinie 97/23/EG Anhang III Modul H/H1 Werkstoffatteste 3.1 B Durchstrahlungsprüfung der Schweissnähte (2%) Volumetric volume (L): 1.280 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure:…
Additional information: Brewery; According to information from the previous operator, the tanks were last used as fermentation tanks in a brewery with an operating pressure of +2 bar. According to the drawing, the tanks were tested with a test pressure of +4 bar. However, a TÜV test was not carried out; Diameter manhole 350 mm; 1 tank is missing 1…
item available on order Article type: brand new fermentation tank - type CCT-HL Additional information: Included in the price: cip spraybol, thermometer, sample valve. In option: butterfly valve, airlock (see options). Volumetric volume (L): 1.300 L Max. density P (kg/m³): 1.050 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature…
item available on order Article type: brand new pressure tank - type CCT-ES-HL Volumetric volume (L): 1.300 L Finish stainless steel: pickled Pressure in tank: pressure Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no…
item available on order Article type: brand new pressure tank Volumetric volume (L): 1.300 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank:…
Additional information: Pharmacy; Manhole diameter approx. 420 mm Volumetric volume (L): 1.300 L Pressure in tank: pressure Max. pressure (Bar): 0,10 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator:…
item available on order Article type: brand new storage tank - type K3-H12S-IL Volumetric volume (L): 1.330 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -0,35 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI…
item available on order Article type: brand new pressure tank - type BBT-ES-SL Volumetric volume (L): 1.500 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Pressure in tank: pressure Design pressure (Bar): 3,40 Bar Max. pressure (Bar): 2 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical…
item available on order Article type: brand new storage tank - type K3-H12S-L Volumetric volume (L): 1.500 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Finish stainless steel: 2 Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -0,35 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI…
Additional information: Dairy; Height-adjustable screws of the feet are missing; hand lever of the butterfly valve is missing; Manhole cover not suitable for an operating pressure of 2 bar (vessel was probably operated without pressure by the previous operator and the cover was replaced accordingly); bump at the insulation jacket; Functionality of the double jacket not checked Volumetric volume (L):…
Article type: second-hand pressure tank Additional information: Full vacuum -1 bar; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 1.500 L Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -1 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no…
Additional information: Biochemistry; Armaflex insulation in parts of the cylinder; manhole approx. 325 x 420 mm; 3 baffles and 1 perforated pipe inside the vessel (see photos) Volumetric volume (L): 1.500 L Pressure in tank: pressure Max. pressure (Bar): 6 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no…
Additional information: Pharmacy; Homogenizer on the underbody (see photos) is included in the scope of delivery Volumetric volume (L): 1.540 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: no Volume:…
item available on order Article type: brand new storage tank - type K3-H12S-L Volumetric volume (L): 1.760 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -0,25 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI…
Article type: second-hand mixing tank Additional information: Tank AD-2000 Merkblatt, agitator CE0344 ATEX Ex 2 1/3 G bc ; hardly ever used; we can’t give any guarantees about the agitator Volumetric volume (L): 1.995 L Max. density P (kg/m³): 1.400 Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 90 °C Material wet parts: SS AISI 304…
item available on order Article type: brand new storage tank - type K3-H12S-L Volumetric volume (L): 2.000 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -0,25 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI…
item available on order Article type: brand new storage tank - type K3-H12S-IL Volumetric volume (L): 2.000 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -0,25 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI…
Article type: second-hand pressure tank Additional information: The tanks have never been used Volumetric volume (L): 2.000 L Pressure in tank: pressure Design pressure (Bar): 4,30 Bar Max. pressure (Bar): 3 Bar Max. temperature (°C): 20 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Article type: second-hand mixing tank Additional information: Tank AD-2000 Merkblatt, agitator CE0344 ATEX Ex 2 1/3 G bc T4 ; hardly ever used; we can’t give any guarantees about the agitator Volumetric volume (L): 2.100 L Max. density P (kg/m³): 1.400 Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 90 °C Material wet parts: SS AISI…
item available on order Article type: brand new pressure tank - type CCT-ES-HL Volumetric volume (L): 2.300 L Max. density P (kg/m³): 1.200 Finish stainless steel: pickled Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 304L (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no…
Additional information: Brewery Volumetric volume (L): 2.300 L Pressure in tank: pressure Max. pressure (Bar): 2,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: cylinder…
Additional information: Brewery Volumetric volume (L): 2.470 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: cylinder…
Additional information: Cosmetics; Foot ends cut off (see photos); motor-/gear is missing; pipe end cut flush Volumetric volume (L): 2.500 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: Brewery; Indicated total height according to drawing Volumetric volume (L): 2.700 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 10 L Max Overpressure: 3 Bar Type HE on the bottom: heating/cooling…
Additional information: Brewery; Manhole diamter approx. 300 x 395 mm (manhole cover missing); some residues of previous content Volumetric volume (L): 3.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included:…
Additional information: Insulation brackets made of Fe around the outside of the cylinder (see photos); some residues of previous content; Metallic discolouration inside Volumetric volume (L): 3.000 L Pressure in tank: pressure Max. pressure (Bar): 14 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Brewery Volumetric volume (L): 3.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 134 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 2 Bar Max. working temperature: 134 °C Documents included: no Technical drawing…
item available on order Article type: brand new storage tank - type K3-H12S-IL Volumetric volume (L): 3.300 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -0,10 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI…
item available on order Article type: brand new mixing tank - type K3-H12S-IL Volumetric volume (L): 3.300 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -0,10 Bar Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI…
Article type: second-hand pressure tank Volumetric volume (L): 3.340 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Min. pressure (Bar): -1 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: dished Total discharge: yes Fixation points: 3 adjustable…
Additional information: brewery; 1 pipe inside the tank (see photos); manhole appr. 345 x 440 mm; dents at the insulation jacket Volumetric volume (L): 3.600 L Pressure in tank: pressure Max. pressure (Bar): 2,60 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total…
Additional information: cosmetic; differences in design (see pictures); type plates are only available for 1 tank; cone height appr. 800 mm; hand hole 350 mm in the upper bottom; some residues of previous content Volumetric volume (L): 3.660 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 85 °C Material wet parts: SS AISI 316 (V4A)…
Article type: brand new pressure tank - type CCT-HIL Volumetric volume (L): 3.850 L Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: pressure Max. pressure (Bar): 3,30 Bar Max. temperature (°C): 50 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile…
Additional information: Brewery; 2 of the feet with damage; outlet at the end, pipe diameter inside approx. 65 mm (outlet pipe tapers at the beginning to a diameter of approx. 50 mm); Toggle screw of the manhole cover made of Fe (see photos) Volumetric volume (L): 3.900 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts:…
Additional information: Sparkling wine; 1 manhole approx. 320 x 420 mm in the front bottom (the manhole cover of 1 tank is missing); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for installation; the thread of the outlet of 1 tank is damaged; some residues of previous content Volumetric…
Additional information: Fruit juice; 1 former connection in the cylinder was welded shut by the previous operator Volumetric volume (L): 3.990 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no…
Article type: second-hand pressure tank Additional information: The cooling jacket is broken, the tank itself has been pressure tested to 3 bar and does not leak. The tank has some deformations at the front and one inside the tank --> look closely at the photos please. Volumetric volume (L): 4.000 L Pressure in tank: pressure Design pressure (Bar): 3 Bar…
Article type: second-hand pressure tank Additional information: Tank AD-2000 Merkblatt; hardly ever used Volumetric volume (L): 4.450 L Max. density P (kg/m³): 1.200 Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 90 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape…
Additional information: Chemistry; Upper bottom, Aisi 304 (1.4301); 4 support brackets, Fe; Slight corrosion of material inside the tank; some residues of previous content; motor-/gear is missing Volumetric volume (L): 5.000 L Pressure in tank: pressure Max. pressure (Bar): 3,20 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no…
Article type: second-hand pressure tank Volumetric volume (L): 5.000 L Max. density P (kg/m³): 1.000 Pressure in tank: pressure Design pressure (Bar): 0,49 Bar Max. pressure (Bar): 0,49 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical Wall type: dished…
Article type: second-hand pressure tank Additional information: PED file on demand; the tank has never been used Volumetric volume (L): 5.000 L Max. density P (kg/m³): 1.800 Pressure in tank: pressure Max. pressure (Bar): 6 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated Heat exchanger: no…
item available on order Article type: brand new storage tank - type K-HL Volumetric volume (L): 5.300 L Max. density P (kg/m³): 1.150 Pressure in tank: pressure Max. temperature (°C): 100 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Top type: conical 18 ° Shape…
Additional information: Wine storage; 1 manhole approx. 320 x 415 mm in the cylinder; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves and manhole seals were installed; small dents in the tank feet Volumetric volume (L): 5.320 L Pressure in…
Additional information: Sparkling wine; 1 manhole approx. 320 x 420 mm in the front bottom (one tank is missing a manhole cover); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for installation; 1 tank with a dent in the cylinder/floor transition (see photos); some residues of previous content Volumetric…
Additional information: brewery Volumetric volume (L): 5.982 L Pressure in tank: pressure Max. pressure (Bar): 0,90 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator:…
Additional information: Sparkling wine; 1 manhole approx. 320 x 420 mm in the front bottom, slight metallic discoloration inside; some residues of previous content Volumetric volume (L): 6.000 L Pressure in tank: pressure Max. pressure (Bar): 8 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: Sparkling wine; 1 oval manhole (approx. 420 x 320mm) in the front floor; information in the drawing on cylinder length not correct; various loose fittings in the tanks (were not taken into account when specifying the tank dimensions); some residues of previous content Volumetric volume (L): 6.000 L Pressure in tank: pressure Max. pressure (Bar): 8 Bar Material…
Additional information: sparkling wine; 1 manhole approx. 320 x 420 mm in the front bottom (the manhole cover of 1 tank is missing); the type plate of 1 tank is missing; front bottom marbled on the outside; foot ends partially cut off, total height may vary slightly; some residues of previous content Volumetric volume (L): 6.200 L Pressure in tank:…
Volumetric volume (L): 6.200 L Pressure in tank: pressure Max. pressure (Bar): 8 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: cylinder Outlet of tank:…
Additional information: Brewery; Manhole diameter approx. 630 mm Volumetric volume (L): 7.500 L Pressure in tank: pressure Max. pressure (Bar): 5 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator:…
Article type: second-hand pressure tank Additional information: Holvrieka pressure tank in very good condition. Volumetric volume (L): 9.959 L Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: pressure Design pressure (Bar): 12 Bar Max. pressure (Bar): 7,50 Bar Min. pressure (Bar): 0,02 Bar Max. temperature (°C): 95 °C Material wet parts: SS AISI 304L (V2A) Model: vertical…
Additional information: solvent tank; double safety jacket made of Fe (RSt-2; 4 mm) Volumetric volume (L): 10.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no Documents included: no Technical drawing included:…
Additional information: Tank was designed as gas station for LNG but never used; though a bundled element in the middle of the tank it can be heated or cooled; 2 transport blocks made of Fe; part of the insulation & insulating jacket is missing in the upper part of the cylinder.; some residues of previous content; dents at the cylinder…
Additional information: ice water tank in a dairy; some residues of previous content; pipe end cut flush Volumetric volume (L): 10.000 L Pressure in tank: pressure Max. pressure (Bar): 5 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included:…
Additional information: Brewery; 1 stainless steel sheet inside in the lower bottom (see photos); Wall thickness of the lowest cylinder segment: 3 mm; dents at the cylinder Volumetric volume (L): 10.500 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no…
Additional information: Lacquers; Manhole diameter 500 mm; Small dents in the cylinder; Differences in the outlet sizes possible; some residues of previous content Volumetric volume (L): 10.600 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Brine tank (water / salt solution) in a chemical plant; Manhole cylinder DN 600; double outlet DN 50; some residues of previous content Volumetric volume (L): 10.800 L Pressure in tank: pressure Max. pressure (Bar): 3,20 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: Ethanol; Manufactured according to DIN 6618; manhole diameter 600 mm; 2 pipes each inside the tanks; some residues of previous content Volumetric volume (L): 11.100 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: Distillery; Manhole approx. 325 x 420 mm; Cylinder with strong and smaller dents (see photos); The cylinder could be bulged by us upon request and after consultation for an additional charge; According to the manufacturer's instructions, you could purchase the missing manhole cover from Ziemann; some residues of previous content; manhole cover is missing Volumetric volume (L): 12.440…
Additional information: adhesive production; 4 support brackets Fe; diameter manhole 580 mm; slight metallic discolourations inside; total height tank 1: appr. 5450 mm (this tank with diverse internal installations, see pictures); total height tank 2: appr. 4650 mm (baffles inside); some residues of previous content; manhole cover plated Volumetric volume (L): 12.800 L Pressure in tank: pressure Max. pressure (Bar):…
Additional information: yeast tank in a brewery; cone height appr. 1.300 mm Volumetric volume (L): 13.700 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 40 L Max…
Additional information: Fruit juice; Outlet without former fitting; slight metallic discoloration inside the tank (see photos); some residues of previous content Volumetric volume (L): 14.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Brewery; Struts between the feet made of mild steel (see photos); some residues of previous content Volumetric volume (L): 15.000 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 25 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total…
Additional information: Dairy; Double jacket with trickle ring - only suitable for unpressurized tempering; in some cases, the welding of the double jackets has become slightly loose in the upper area; on request - up to 5x more vessels available (external storage) Volumetric volume (L): 16.150 L Pressure in tank: pressure Max. pressure (Bar): 3,20 Bar Max. temperature (°C): 150…
Additional information: Dairy; Manhole diameter approx. 510 mm; height-adjustable screws of the feet are no longer present; 1 small pressure point in the insulation jacket; pipe end cut flush Volumetric volume (L): 17.620 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 95 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat…
Article type: second-hand storage tank Additional information: The covering around the insulation has come loose at the front, please look carefully at the photos.; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 20.000 L Pressure in tank: pressure Design pressure (Bar): 4,50 Bar Max. pressure (Bar): 3,50 Bar Material wet parts: SS AISI 304 (V2A) Model:…
Additional information: fruit juice industry; 1 tank with a smaller dent in the cylinder; mannhole appr. 340 x 440 mm; pipe end cut flush Volumetric volume (L): 20.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Article type: second-hand pressure tank Additional information: There are minor differences between the tanks Volumetric volume (L): 21.300 L Ra inner weld: 0,80 Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type:…
Additional information: Beverage industry Volumetric volume (L): 21.400 L Pressure in tank: pressure Max. pressure (Bar): 4,50 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 205 L Max Overpressure: 1,50 Bar Max. working temperature: 20 °C…
Additional information: Brewery; some residues of previous content; Metallic discolouration inside Volumetric volume (L): 24.400 L Pressure in tank: pressure Max. pressure (Bar): 4 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 114 L Max Overpressure:…
Additional information: Chemistry; Tank with dents in the cylinder (vacuum damage; see photos); cylinder manhole diameter approx. 600 mm; feet ends cut off; 3 immersion pipes inside the tank; specified total height including ring line connection in the upper bottom; outlet with flanged, reducing fitting; some residues of previous content Volumetric volume (L): 28.100 L Pressure in tank: pressure Max.…
Article type: second-hand pressure tank Volumetric volume (L): 28.200 L Ra inner weld: 0,80 Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: dished Total discharge: yes Fixation points: 5 adjustable feet…
Additional information: Brewery; 1 manhole approx. 360 x 440 mm in the front bottom; 3 loose bearing saddles each made of Fe (galvanized); 1 cut-off connection diameter 100 mm at the bottom of the cylinder; 1 tank with a larger dent in the cylinder/bottom transition as well as several smaller dents; 1 other tank with dents in the cylinder (see…
Additional information: Filter plate welded inside (see pictures) Volumetric volume (L): 37.100 L Pressure in tank: pressure Max. pressure (Bar): 5 Bar Max. temperature (°C): 90 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Beer; cooling surface: 17 m²; transport dimension: 7,5 x 3,0 x 3,0 m. Volumetric volume (L): 37.800 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 20 °C Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: no Volume: 260 L Max Overpressure: 1 Bar Documents included:…
Article type: second-hand storage tank Additional information: Suction tube instead of a total drain, the previous product was ammonia Volumetric volume (L): 42.610 L Pressure in tank: pressure Max. pressure (Bar): 2,60 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Wall…
Additional information: Solvents; Cylinder manhole diameter: 600 mm; total height as per drawing without feet Volumetric volume (L): 46.500 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 25 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Brewery Volumetric volume (L): 47.900 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: available…
Article type: second-hand pressure tank Volumetric volume (L): 50.000 L Ra inner weld: 0,80 Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: dished Total discharge: yes Fixation points: 6 adjustable feet…
Additional information: Solvents; Total height as per drawing (small deviation possible); manhole cylinder NW 600 Volumetric volume (L): 67.000 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Solvents; Manhole cylinder NW 600; total height might deviate slightly (measures taken from drawing); some residues of previous content Volumetric volume (L): 67.000 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: brewery; Exact dimensions may vary slightly, Volumetric volume (L): 69.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator:…
Additional information: brewery; Exact dimensions may vary slightly, one tank is sold with an agitator for an additional charge Volumetric volume (L): 70.300 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Article type: second-hand pressure tank Additional information: Promotion till the end of the year 2024 --> price is 8.250€ delivered in Holland or Belgium, for other countries please inquire. Volumetric volume (L): 73.000 L Pressure in tank: pressure Design pressure (Bar): 4 Bar Max. pressure (Bar): 1,50 Bar Material wet parts: mild-steel Model: horizontal Configuration: single-skin Heat exchanger: no Insulation:…
Additional information: Fruit juice; Total height corresponds to manufacturer drawing, the actual total height might deviate slightly Volumetric volume (L): 83.500 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included:…
Additional information: Pharmaceutical waste water; Manhole cylinder NW 600; some residues of previous content Volumetric volume (L): 118.000 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
