Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
Additional information: Dairy; Manhole diameter approx. 445 mm; double jacket with trickle ring - only suitable for pressureless tempering; double jacket cladding has partially come loose in the area of the upper welds; small dents in the double jacket; lower heating connection cut off; height-adjustable screws of the feet are missing Volumetric volume (L): 16.500 L Pressure in tank: pressure…
Additional information: Pharmaceutical Chemistry; Stand frame, Aisi 304; some residues of previous content; manhole cover plated Volumetric volume (L): 19.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,20 Bar Min. pressure (Bar): 0,20 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Dairy; Probably 3 cooling rings around the cylinder; heating connections cut off; 1 former manhole in the lower cylinder area was welded shut by the previous operator; foot ends were cut off when the tank was dismantled and are loose (with small dents; see photos); dents at the insulation jacket; pipe end cut flush Volumetric volume (L): 19.600…
Additional information: Solvents; Built according to DIN6618; pipelines inside the tanks; stand frame, 1.4301 (Aisi 304); manhole cover, 1.4541 (Aisi 304) Volumetric volume (L): 21.600 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,50 Bar Min. pressure (Bar): 0,10 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: food industry Volumetric volume (L): 27.600 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Pharmaceutical chemistry; Material 1.4462 (duplex steel); Drawing only available as pdf (as seen under the heading "Technical Drawing"); Inside of tank showing signs of corrosion; small optical damages in the insulation jacket are almost impossible to avoid for this type of insulation cover.; bump at the insulation jacket Volumetric volume (L): 28.100 L Pressure in tank: pressure and…
Additional information: Adhesive production; Manhole diameter upper bottom: approx. 700 mm; Manhole diameter cylinder: approx. 500 mm Volumetric volume (L): 29.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,60 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes…
Additional information: Manhole diameter: approx. 600 mmm; saddles made of Aisi 304 Volumetric volume (L): 29.250 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 0,25 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: Dairy; Double jacket with trickle ring - only suitable for pressureless cooling; dents in the double jacket; small cracks in the double jacket lining; connections partially cut off; 2 height-adjustable screws of the feet are missing; pipe end cut flush Volumetric volume (L): 30.395 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,50 Bar Min. pressure…
Additional information: Chemistry; Manhole cylinder diameter 500 mm (most of the manhole cover screws are missing); 1 tank has 1 foot pressed into the lower bottom and the other tank has 2 feet pressed into the lower bottom; (this tank also has 1 connection pressed into the upper bottom and the heating coil is pressed in at one point; the…
Additional information: Sterile tank in a dairy; Double jacket with trickle ring - only suitable for unpressurized tempering; dents in the double jacket in the area of the support timbers; maximum temperature for sterilization in the inner tank 145° C; specified total height according to drawing; 1 former connection in the upper bottom was welded shut by the previous operator…
Additional information: Chemistry; Tempering only in the lower area of the cylinder & underbody (see pictures); manhole cover VA-plated Volumetric volume (L): 33.725 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 140 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
