Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
Additional information: Dairy; 1 tank with 1 dent in the insulation jacket in the area of the upper bottom (see photos); pipe end cut flush Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 4 Bar Type HE on the cylinder:…
Additional information: Slurry; Type plate no longer available; further technical documents available; Diameter manhole cylinder 600 mm; a taper DN 50 is flanged to the outlet; 1 additional container of the same design is available on request Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Configuration: single-skin Heat exchanger: no Insulation: no…
Article type: second-hand mixing tank Additional information: The tanks have never been used, only for test runs; we can’t give any guarantees about the agitator Volumetric volume (L): 10.000 L Max. density P (kg/m³): 1.180 Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Material wet parts: polyester (fiberglass) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
item available on order Article type: brand new storage tank - type K3-SL Volumetric volume (L): 10.300 L Max. density P (kg/m³): 1.200 Ra inner weld: 1,60 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single-skin Heat exchanger:…
item available on order Article type: brand new storage tank - type K3-H12W.IL Volumetric volume (L): 10.300 L Max. density P (kg/m³): 1.350 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated with heat-exchanger…
item available on order Article type: brand new storage tank - type K5-SL Additional information: inner surface 0.8µ Volumetric volume (L): 10.300 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model:…
item available on order Article type: brand new storage tank - type K5-SL Additional information: inner surface 0.8µ Volumetric volume (L): 10.300 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model:…
item available on order Article type: brand new storage tank - type K3-H12W.L Volumetric volume (L): 10.300 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single jacketed with…
item available on order Article type: brand new storage tank - type K3-IL Volumetric volume (L): 10.300 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated Heat exchanger:…
item available on order Article type: brand new storage tank - type K3-SL Volumetric volume (L): 10.300 L Max. density P (kg/m³): 1.200 Ra inner weld: 1,60 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model: vertical Configuration: single-skin Heat exchanger:…
Volumetric volume (L): 10.450 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 34 L Max Overpressure: 3 Bar Max. working temperature: 120 °C Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator:…
Additional information: Wine storage; 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom; smaller dents in the upper bottom; feet partially supported with stainless steel plates; tank with a dent in the front bottom (see photos) Volumetric volume (L): 10.460 L Pressure in tank: ATM -…
Additional information: Wine storage; 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; stated total height is estimated; foot ends were cut off during dismantling and are included loose (current total height with cut off foot ends approx. 2,650 mm). Volumetric volume (L): 10.468 L Pressure…
Article type: second-hand storage tank Volumetric volume (L): 10.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical Bottom type: dished Total discharge: yes Fixation points: 2 non adjustable feet Manway(s): RVS 304 Gasket manway(s): unknown Fixation point(s): painted…
Additional information: Dairy; Incomplete fastening of the manhole cover; small dents in the insulation jacket Volumetric volume (L): 10.589 L Pressure in tank: ATM - atmosferic Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 160 L Max Overpressure: 3 Bar Type HE on the bottom: heating/cooling jacket Type HE on the cylinder:…
Additional information: Available from February 2025 Volumetric volume (L): 10.640 L Pressure in tank: ATM - atmosferic Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 3 Bar Max. working temperature: 120 °C Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: yes Outlet of…
Additional information: Food Volumetric volume (L): 11.000 L Pressure in tank: ATM - atmosferic Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the bottom: half pipe welded onto the outside of the innertank Type HE on the cylinder: half pipe welded onto the outside of the innertank Documents included: no…
Additional information: wine storage; Slight differences in design possible (e.g. partly 3 feet, partly 4 feet); manhole approx. 340 x 440 mm Volumetric volume (L): 11.000 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange…
Additional information: 1 manhole diameter 500 mm in the lower cylinder area; 1 hand hole NW 200 in the upper cylinder area (attention: manhole cover and hand hole cover made of Aisi 304); Tank with adhesions inside; slight rust on the outside of the tank (see photos) Volumetric volume (L): 11.000 L Pressure in tank: ATM - atmosferic Configuration: single-skin…
Additional information: bioethanol plant; support ring made of Fe; manhole covers are missing Volumetric volume (L): 11.000 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: flange DN80 Cylinder:…
Additional information: Wine storage; 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; 1 side wall slightly pushed inwards Volumetric volume (L): 11.320 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger:…
Additional information: Ethanol; some residues of previous content Volumetric volume (L): 11.500 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: DN65 DIN 11851 Cylinder: 2,50 mm Bottom: 2,80…
Additional information: food industry Volumetric volume (L): 11.630 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: flange DN65 Internal diameter tank: 2.000 mm…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
