Additional information: cylinder manhole diameter: 600 mm; some residues of previous content Volumetric volume (L): 43.350 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 0,25 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: Chemistry; Tank with dents in the cylinder (vacuum damage; see photos); cylinder manhole diameter approx. 600 mm; feet ends cut off; 3 immersion pipes inside the tank; specified total height including ring line connection in the upper bottom; outlet with flanged, reducing fitting; some residues of previous content Volumetric volume (L): 28.100 L Pressure in tank: pressure Max.…
Additional information: Manhole diameter: approx. 600 mmm; saddles made of Aisi 304 Volumetric volume (L): 29.250 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 0,25 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: Solvents; Manhole cylinder NW 600; total height might deviate slightly (measures taken from drawing); some residues of previous content Volumetric volume (L): 67.000 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Solvents; Total height as per drawing (small deviation possible); manhole cylinder NW 600 Volumetric volume (L): 67.000 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Pharmacy; Different manufacturers, therefore minor differences in the design (e.g. manhole cover); different outlet valves (on the black rotary valves (see photos) outlet diameter approx. 55 mm); drawing for Eurocont available; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Max. pressure (Bar): 0,65 Bar Min. pressure (Bar): 0,15 Bar Material wet parts:…
Additional information: Pharmaceutical waste water; Manhole cylinder NW 600; some residues of previous content Volumetric volume (L): 118.000 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Wine storage; 1 manhole approx. 320 x 415 mm in the cylinder; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves and manhole seals were installed; small dents in the tank feet Volumetric volume (L): 5.320 L Pressure in…
Additional information: Pharmacy Volumetric volume (L): 1.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 72 L Max Overpressure: 6 Bar…
Additional information: Herbal pharmacy; Attention: outlet fitting extends beyond foot ends (former foot extensions are no longer available); Screws of the outlet fitting are missing; some residues of previous content Volumetric volume (L): 800 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated…
Additional information: pharmacy; frame, Aisi 304; slight metallic discoloration inside the tank; including Hilge Hygia centrifugal pump; temperature control takes place via a plug-in heater with an output of 11 KW; some residues of previous content Volumetric volume (L): 1.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C):…
item available on order Article type: brand new transport tank Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Pressure in tank: pressure Design pressure (Bar): 3,40 Bar Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A)…
Additional information: Pharmacy; Manhole DN 600; Outlet with screwed fitting; No reference to the acceptance of the double jacket in the test report on the acceptance (in a copy of drawing 1160246-1A or 1B there is the signed stamp "Tested according to AD 2000 rules from TÜV Süd); Parts of the blind screw connections may be present Volumetric volume (L):…
Additional information: some residues of previous content; traces of usage Volumetric volume (L): 800 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange…
Additional information: Pharmacy; Max.permissible temperature in the test certificate: -10 / + 120 ° C; tank drawing in jpeg format and installation drawing available Volumetric volume (L): 280 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration:…
Article type: second-hand pressure tank Additional information: Full vacuum -1 bar; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 1.500 L Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -1 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no…
Additional information: fruit juice industry; Vessel with minor dents in the cylinder (see photos); pipe end cut flush Volumetric volume (L): 20.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included:…
Additional information: food industry; minor dents and slight adhesions possible; Manhole is fastened with a clamping ring; various connection designs in the upper bottom; some residues of previous content; traces of usage Volumetric volume (L): 800 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 120 °C Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Brewery; Struts between the feet made of mild steel (see photos); some residues of previous content Volumetric volume (L): 15.000 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 25 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 285mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 1.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI…
Additional information: Brewery; Tanks screwed into frame, Aisi 304; 1 hand hole diameter approx. 350 mm in the front base (hand hole cover made of plastic) Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Article type: second-hand pressure tank Additional information: PED file on demand; the tank has never been used Volumetric volume (L): 5.000 L Max. density P (kg/m³): 1.800 Pressure in tank: pressure Max. pressure (Bar): 6 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated Heat exchanger: no…
Additional information: Brewery; Manhole diamter approx. 300 x 395 mm (manhole cover missing); some residues of previous content Volumetric volume (L): 3.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included:…
Additional information: Pharmaceutical chemistry; 3 support brackets, Aisi 304; double jacket for heating/cooling around the lower cylinder area and the lower bottom (double jacket was added later and is not shown in the vessel drawing); slight differences in the design of the two vessels, e.g. differences in the manhole covers and the outlets (1 x outlet diameter approx. 53 mm,…
Additional information: Support ring, Aisi 304; Manhole diameter approx. 410 mm Volumetric volume (L): 3.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: Sparkling wine; 1 oval manhole (approx. 420 x 320mm) in the front floor; information in the drawing on cylinder length not correct; various loose fittings in the tanks (were not taken into account when specifying the tank dimensions); some residues of previous content Volumetric volume (L): 6.000 L Pressure in tank: pressure Max. pressure (Bar): 8 Bar Material…
Article type: second-hand pressure tank Volumetric volume (L): 5.000 L Max. density P (kg/m³): 1.000 Pressure in tank: pressure Design pressure (Bar): 0,49 Bar Max. pressure (Bar): 0,49 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical Wall type: dished…
item available on order Article type: brand new pressure tank Volumetric volume (L): 1.300 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank:…
Additional information: Pharmaceutical chemistry; 2 support brackets made of Aisi 304 (contact surface the other way around; see photos); flanges partly made of Fe; further techn. documents available; In some cases, connections are flanged in the top bottom or at the outlet; using these connections would increase the overall height accordingly; some residues of previous content Volumetric volume (L): 1.300…
Article type: second-hand pressure tank Additional information: The tanks have never been used Volumetric volume (L): 2.000 L Pressure in tank: pressure Design pressure (Bar): 4,30 Bar Max. pressure (Bar): 3 Bar Max. temperature (°C): 20 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Pharmaceutical Chemistry; 4 support brackets, st. st.; Hand hole diameter approx. 210 mm; handhole cover is missing Volumetric volume (L): 420 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation:…
Additional information: pharmacy Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 0,50 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Pharmaceutical Chemistry; 4 support brackets, st. st.; diameter handhole 210 mm Volumetric volume (L): 420 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: Manhole diameter 350 mm; 2 support brackets, Aisi 316; 1 connection in the cylinder bent; Connections upper bottom: 1 x DN 100; 5 x DN 50; 2 x DN 25; some residues of previous content Volumetric volume (L): 1.330 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 0,50 Bar Max. temperature…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 285mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 1.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI…
Additional information: Pharmacy; Mobile frame, Aisi 304; Lid clamping ring is missing Volumetric volume (L): 120 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 16 L Max…
Additional information: chemistry; handhole cover is missing Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 26 L Max Overpressure: 1 Bar Max. working…
Additional information: ice water tank in a dairy; some residues of previous content; pipe end cut flush Volumetric volume (L): 10.000 L Pressure in tank: pressure Max. pressure (Bar): 5 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included:…
Additional information: Dairy; Double jacket probably with trickle ring - only suitable for pressureless tempering; the welding of the double jacket in the upper area has come loose slightly in places; outlet diameter 65 mm (tapers towards the tank to approx. 50 mm); small dents inside the tank; heating connections cut off; pipe end cut flush Volumetric volume (L): 5.530…
Additional information: Pharmacy; The previous operator had the vessels hanging in a ring with load cells that was embedded in the ground (1 ring of each is included in the delivery; see photos); Outer diameter in the ring approx. 1,540 mm; insulating jacket made of material 1.0425 Volumetric volume (L): 885 L Pressure in tank: pressure and vacuum Max. pressure…
Additional information: Pharmacy Volumetric volume (L): 920 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 70 L Max Overpressure: 6 Bar…
Additional information: Pharmaceutical Chemistry; 2 support brackets made of Fe (contact surface the other way around with cut off steel parts; see photos); further techn. Documents available; manhole cover plated; Metallic discolouration inside Volumetric volume (L): 2.750 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material…
Additional information: chemistry; Partially small dents in heating coils, slight seizure with shallow depth at the bottom of the jacket Volumetric volume (L): 100.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no…
Additional information: chemistry Volumetric volume (L): 49.338 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Max Overpressure: 6 Bar Max. working temperature: 200 °C Type HE…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; Diameter of outlet (fitting) approx. 44 mm Volumetric volume (L): 8.890 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated…
Additional information: Full set of pharma-compliant technical documentation included in delivery; tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 150mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 4.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; Diameter of outlet (fitting) approx. 44 mm Volumetric volume (L): 4.700 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated…
Additional information: Full set of pharma-compliant technical documentation included in delivery; tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 285mm Volumetric volume (L): 500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet…
Additional information: Full set of pharma-compliant technical documentation included in delivery; tank was manufactured for a global pharmaceutical company but was never put into operation; Hand hole with sight glass diameter: 150mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 1.700 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Full set of pharma-compliant technical documentation included in delivery; tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 150mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 1.040 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Pharmacy; 1 pump (brand GRUNDFOS) is included in delivery; 1 control cabinet (used by the previous operator for 3 of these tanks) can be purchased additionally for an additional charge (see photos) Volumetric volume (L): 1.880 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C…
Additional information: Pharmacy Volumetric volume (L): 880 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 41 L Max Overpressure: 6 Bar…
Additional information: Full set of pharma-compliant technical documentation included in delivery; tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 100mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 532 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 220mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI…
Additional information: Pharmacy; 1 pump is included in delivery (no guarantee of functionality) Volumetric volume (L): 390 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no…
Additional information: sparkling wine; 1 manhole approx. 320 x 420 mm in the front bottom (the manhole cover of 1 tank is missing); the type plate of 1 tank is missing; front bottom marbled on the outside; foot ends partially cut off, total height may vary slightly; some residues of previous content Volumetric volume (L): 6.200 L Pressure in tank:…
Additional information: Pharmacy Volumetric volume (L): 550 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 135 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 67 L Max Overpressure: 2 Bar Max. working temperature: 135 °C Type HE…
Additional information: Sparkling wine; 1 manhole approx. 320 x 420 mm in the front bottom, slight metallic discoloration inside; some residues of previous content Volumetric volume (L): 6.000 L Pressure in tank: pressure Max. pressure (Bar): 8 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: Sparkling wine; 1 manhole approx. 320 x 420 mm in the front bottom (one tank is missing a manhole cover); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for installation; 1 tank with a dent in the cylinder/floor transition (see photos); some residues of previous content Volumetric…
Additional information: Sparkling wine; 1 manhole approx. 320 x 420 mm in the front bottom (the manhole cover of 1 tank is missing); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for installation; the thread of the outlet of 1 tank is damaged; some residues of previous content Volumetric…
Additional information: Pharmacy; Heating coil approx. 5 turns; slight metallic discoloration inside Volumetric volume (L): 554 L Pressure in tank: pressure Max. pressure (Bar): 2,50 Bar Max. temperature (°C): 138 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Pharmacy; Heating coil approx. 6 turns Volumetric volume (L): 554 L Pressure in tank: pressure Max. pressure (Bar): 2,50 Bar Min. pressure (Bar): 2,50 Bar Max. temperature (°C): 121 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: pharma; Floor frame, V2A; manhole diameter approx. 250mm; immersion tube Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no…
Article type: second-hand pressure tank Additional information: The tanks have never been used. Volumetric volume (L): 185 L Pressure in tank: pressure Max. pressure (Bar): 6 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Article type: second-hand storage tank Additional information: The covering around the insulation has come loose at the front, please look carefully at the photos.; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 20.000 L Pressure in tank: pressure Design pressure (Bar): 4,50 Bar Max. pressure (Bar): 3,50 Bar Material wet parts: SS AISI 304 (V2A) Model:…
Upptäck Bitumen 22-31m3 – en robust lösning för industrin. Med tillverkad i Syrafast 316, i begagnat skick säkerställs lång livslängd. Perfekt för professionell användning.
Kemi eller livsmedel 31-35m3 passar perfekt för krävande miljöer. Den är tillverkad i Syrafast 316, i begagnat skick, modell Horisontell, isolerad konstruktion och levererar lång livslängd över tid. Perfekt för professionell användning.
Behöver du en effektiv lösning för industrin? Kemi eller livsmedel 17-26m3 är utvecklad för professionell användning och erbjuder hög driftsäkerhet. Med egenskaper som tillverkad i Syrafast 316, i begagnat skick, modell Horisontell. Redo att användas direkt i drift.
Additional information: Beer tanks; 1 hand hole approx. 190 x 240 mm in the front bottom (hand hole cover made of plastic); 2 loose foot frames, Aisi 304 (2 different versions of the foot frames, as the previous operator's tanks were stored on top of each other); total height depending on the design of the foot frame approx. 1,000 -…
Additional information: Dairy; Double jacket with trickle ring - only suitable for unpressurized tempering; in some cases, the welding of the double jackets has become slightly loose in the upper area; on request - up to 5x more vessels available (external storage) Volumetric volume (L): 16.150 L Pressure in tank: pressure Max. pressure (Bar): 3,20 Bar Max. temperature (°C): 150…
Additional information: Dairy; Probably 3 cooling rings around the cylinder; heating connections cut off; 1 former manhole in the lower cylinder area was welded shut by the previous operator; foot ends were cut off when the tank was dismantled and are loose (with small dents; see photos); dents at the insulation jacket; pipe end cut flush Volumetric volume (L): 19.600…
Additional information: Brewery; 1 manhole approx. 360 x 440 mm in the front bottom; 3 loose bearing saddles each made of Fe (galvanized); 1 cut-off connection diameter 100 mm at the bottom of the cylinder; 1 tank with a larger dent in the cylinder/bottom transition as well as several smaller dents; 1 other tank with dents in the cylinder (see…
Additional information: Cosmetics; Vessel lid can be lifted with lifting frame; Vessel stands on 2 feet and is also attached to the lifting frame; Total height indicated is estimated; Manhole diameter approx. 440 mm; 1 heating connection cut off; 1 dirt protection collar around the outside of the vessel (diameter approx. 1,870 mm) Volumetric volume (L): 2.911 L Pressure in…
Additional information: Cosmetics; 4 support brackets, stainless steel; Total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank; 1 dirt protection collar on the outside over the support brackets (diameter approx. 1,740 mm) Volumetric volume (L): 1.410 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Cosmetics; 4 support brackets, stainless steel; Total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank Volumetric volume (L): 2.900 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated…
Additional information: Cosmetics; 4 support brackets, stainless steel; Total height is estimated; slight metallic discoloration inside the tank Volumetric volume (L): 1.410 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes…
Additional information: Pharmacy; Original drawing available; tank was rebuilt in 1997 (e.g. changing the feet or connections); Evidence of the subsequent pressure test available; Conversion drawing only available as a fax; 1 dip tube inside the tank; some residues of previous content Volumetric volume (L): 530 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure…
Additional information: Food industry; Partly slightly larger residues of fruit pulp inside; some residues of previous content; traces of usage Volumetric volume (L): 600 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 0,15 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: brewery; Exact dimensions may vary slightly, 3 legs of 2 tanks were shortened during dismantling (these are included loose and can be welded back on site) Volumetric volume (L): 69.000 L Pressure in tank: pressure Max. pressure (Bar): 6 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Pharmacy; The tank was rebuilt at the end of 2012 (socket welding and shortening of the feet; test certificate from TÜV is available; the drawing provided in the appendix is the original drawing; 1 dent in the insulating jacket Volumetric volume (L): 1.344 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar):…
5000 liter tank i Syrafast 316 är en pålitlig tank för industriella behov. Den är rymmer 5000 liter, tillverkad i Syrafast 316, i begagnat skick, modell Horisontell och ger lång livslängd. Perfekt för professionell användning.
Additional information: Beverage industry; some residues of previous content Volumetric volume (L): 1.178 L Pressure in tank: pressure Max. pressure (Bar): 4 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for…
Additional information: Yoghurt tank in a dairy; Double chamber tank (2 x 40,000 liters); cylinder height 2 x 4600 mm; Manhole approx. 410 x 510 mm; upper tank in the upper bottom leaking; Ready for collection from around the end of July Volumetric volume (L): 80.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,20 Bar Min. pressure…
Article type: second-hand storage tank Additional information: The wheels, manhole flange and closures for the manhole are missing, a new lid with closures = €1900; Special flange on the outlet, we can adjust this to a connection of your choice, this costs €474. We can modify the tank for you, contact us without obligation for your quote. Volumetric volume (L):…
Article type: second-hand storage tank Additional information: The casters and some of the closures for the manway are missing. Special flange on the outlet, we can adjust this to a connection of your choice, this costs €474. We can modify the tank for you, contact us without obligation for your quote. Volumetric volume (L): 300 L Ra inner weld: 0,80…
Article type: second-hand storage tank Additional information: Some of the closures for the manway are missing. Special flange on the outlet, we can adjust this to a connection of your choice, this costs €474. We can modify the tank for you, contact us without obligation for your quote. Volumetric volume (L): 300 L Ra inner weld: 0,80 Pressure in tank:…
Additional information: Pharmacy; Half-coil around approx. 900 mm of the cylinder height; bump at the insulation jacket Volumetric volume (L): 4.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Brewery Volumetric volume (L): 2.300 L Pressure in tank: pressure Max. pressure (Bar): 2,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: cylinder…
Additional information: Herbal pharmacy; Durchmesser Mannloch 510 mm; some residues of previous content; manhole cover is missing Volumetric volume (L): 8.300 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1,96 Bar Min. pressure (Bar): 0,83 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Solvents; Manufacturer's description available; No bottom outlet Volumetric volume (L): 204 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no Documents included: no Technical drawing included: no Registration plate on…
Additional information: Brewery; Manhole appr. 305 x 440 mm Volumetric volume (L): 570 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the cylinder: half pipe welded onto the outside of the…
Additional information: Brewery; Tanks screwed into frame, Aisi 304; 1 hand hole diameter approx. 350 mm in the front base (hand hole cover made of plastic) Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Cosmetics; Cone height approx. 1250 mm; some residues of previous content; Metallic discolouration inside Volumetric volume (L): 3.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,30 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Cosmetics; Flanged to the outlet 1 reduction to diameter 65 mm; 1 dip tube inside the tank; 1 pallet with accessories (foot platforms, fittings, etc.) is included in the scope of delivery; these accessories were not taken into account in the stated total height Volumetric volume (L): 5.600 L Pressure in tank: pressure and vacuum Max. pressure (Bar):…
Additional information: Beer tank; Tank lies loosely in a frame, Aisi 304; 1 manhole approx. 320 x 415 mm in the front bottom Volumetric volume (L): 1.020 L Pressure in tank: pressure Max. pressure (Bar): 3,90 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Brewery; Tanks loose - frame no longer present; 1 manhole diameter approx. 400 mm in the front bottom (manhole cover fastening screws damaged) Volumetric volume (L): 1.050 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: Beer tank; Loose frame, Aisi 304; 1 hand hole approx. 230 x 235 mm in the front bottom (hand hole cover made of plastic); 1 pipe inside the tank Volumetric volume (L): 1.027 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation:…
Additional information: Pharmacy; 1 dent in the inner cylinder (overpressure double jacket; see photos) Volumetric volume (L): 435 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 143 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank:…
Additional information: Chemistry; Manhole cylinder diameter 500 mm (most of the manhole cover screws are missing); 1 tank has 1 foot pressed into the lower bottom and the other tank has 2 feet pressed into the lower bottom; (this tank also has 1 connection pressed into the upper bottom and the heating coil is pressed in at one point; the…
