-
- Tankar
500 liter tank i Syrafast 316
- 92 000 SEK /st exkl moms
- Additional information: An inner double jacket was subsequently welded into the vessel by the previous operator, which reduced the volume indicated on the type plate to approx. 500 liters (see photos); unfortunately, we do not know to what extent the pressure and temperature specifications on the type plate are still valid as a result; total inner diameter of the tank…
- Lägg till i varukorg
-
- Tankar
313 liter tank i Syrafast 316
- 70 000 SEK /st exkl moms
- Additional information: Pharmacy; Chassis made of stainless steel 304 (the switch cabinet boxes shown in the photos are without contents); minor dents inside the vessels; upper bottoms made of stainless steel 304 (suspensions and fastening screws for the upper bottoms are missing); pipe end cut flush; Metallic discolouration inside Volumetric volume (L): 313 L Pressure in tank: ATM - atmosferic…
- Lägg till i varukorg
-
- Tankar
15000 liter tank i Rostfritt 304
- 118 000 SEK /st exkl moms
- Additional information: Rennet production; Manhole diameter approx. 415 mm; tank with build-up inside; slight corrosion on the inside & outside of the vessel; dents at the insulation jacket Volumetric volume (L): 15.000 L Pressure in tank: ATM - atmosferic Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included:…
- Lägg till i varukorg
-
- Tankar
850 liter tank i Rostfritt 304
- 27 000 SEK /st exkl moms
- Additional information: Minor dents in the insulated casing; 2 hand holes, each approx. 175 mm in diameter, and 1 elongated cut-out in the lid (see photos); some residues of previous content Volumetric volume (L): 850 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank:…
- Lägg till i varukorg
-
- Tankar
1285 liter tank i Rostfritt 304
- 118 000 SEK /st exkl moms
- Additional information: Brewery; According to the previous operator, the vessels were last used as fermentation tanks in a brewery with an operating pressure of + 2 bar. According to the drawing, the tanks were approved with a test pressure of +4 bar. However, a TÜV test was not carried out; manhole diameter 350 mm; 1 height-adjustable spherical head screw of…
- Lägg till i varukorg
-
- Tankar
3000 liter tank i Rostfritt 304
- 61 000 SEK /st exkl moms
- Additional information: Dairy; 1 manhole diameter 500 mm in the front base Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for…
- Lägg till i varukorg
-
- Tankar
3300 liter tank i Rostfritt 304
- 65 000 SEK /st exkl moms
- Additional information: Dairy; 1 manhole approx. 415 x 495 mm in the front shelf; some residues of previous content Volumetric volume (L): 3.300 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration…
- Lägg till i varukorg
-
- Tankar
5500 liter tank i Syrafast 316
- 273 000 SEK /st exkl moms
- Additional information: Saline solution; Dents in the insulating jacket possible; the production and documentation drawings are available from the manufacturer and can be purchased separately; some residues of previous content; pipe end cut flush Volumetric volume (L): 5.500 L Pressure in tank: vacuum Max. pressure (Bar): 2,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 140 °C Material wet…
- Lägg till i varukorg
-
- Tankar
850 liter tank i Rostfritt 304
- 36 000 SEK /st exkl moms
- Additional information: Vessel on frame remnant made of Fe; fastening of manhole cover incomplete; some residues of previous content; bump at the insulation jacket Volumetric volume (L): 850 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: no Documents included: no…
- Lägg till i varukorg
-
- Tankar
350 liter tank i Rostfritt 304
- 21 000 SEK /st exkl moms
- Additional information: 1 stronger and smaller dents in the insulation jacket; lower heating connection cut off; some residues of previous content; pipe end cut flush; scratches inside; Functionality of the double jacket not checked Volumetric volume (L): 350 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger:…
- Lägg till i varukorg
-
- Tankar
350 liter tank i Rostfritt 304
- 26 000 SEK /st exkl moms
- Additional information: Smaller dents in the insulation jacket (see photos) Volumetric volume (L): 350 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: open Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange…
- Lägg till i varukorg
-
- Tankar
13500 liter tank i Rostfritt 304
- 118 000 SEK /st exkl moms
- Additional information: Small dents in the inner cylinder; insulation of the lower base no longer complete; some residues of previous content; bump at the insulation jacket; Functionality of the double jacket not checked Volumetric volume (L): 13.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes…
- Lägg till i varukorg
-
- Tankar
12000 liter tank i Rostfritt 304
- 130 000 SEK /st exkl moms
- Additional information: Sorbitol tank in the food industry; 1 partition wall (with openings) in the middle of the vessel divides the cylinder length of 5000 mm into 2 x 2,500 mm; lower area in the inner vessel straight instead of round due to the design; both vessel chambers with a 450 mm diameter manhole; 1 chamber with a DN 65…
- Lägg till i varukorg
-
- Tankar
1100 liter tank i Syrafast 316
- 27 000 SEK /st exkl moms
- Additional information: Frame made of Fe; vessel open at the top with a loose lid segment (see photos) Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
- Lägg till i varukorg
-
- Tankar
400 liter tank i Syrafast 316
- 184 000 SEK /st exkl moms
- Additional information: Pharmacy; Outlet fitting incomplete (see photos); technical documentation is available from the manufacturer and can be requested and purchased there Volumetric volume (L): 400 L Pressure in tank: vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 165 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no…
- Lägg till i varukorg
-
- Tankar
2335 liter tank i Syrafast 316
- 55 000 SEK /st exkl moms
- Additional information: Pharmacy; Double jacket made of stainless steel 304 around the cylinder and lower base; lower heating connection was welded shut by the previous operator; 2 feet were cut off by the previous operator (enclosed loose); some residues of previous content; bump at the insulation jacket Volumetric volume (L): 2.335 L Pressure in tank: ATM - atmosferic Material wet…
- Lägg till i varukorg
-
- Tankar
630 liter tank i Rostfritt 304
- 28 000 SEK /st exkl moms
- Additional information: Food industry; Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 circular opening in the upper bottom Volumetric volume (L): 630 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
- Lägg till i varukorg
-
- Tankar
630 liter tank i Rostfritt 304
- 32 000 SEK /st exkl moms
- Additional information: Food industry; Double jacket made of steel for heating/cooling; was used until the end according to the previous operator (no guarantee for functionality of the double jacket); 1 stronger dents as well as smaller sheet metal cuts in the insulation jacket (see photos); feet/calotte screws made of steel (with stainless steel 304 sheathing) Volumetric volume (L): 630 L…
- Lägg till i varukorg
-
- Tankar
5700 liter tank i Syrafast 316
- 130 000 SEK /st exkl moms
- Additional information: Pharmacy; Manhole DN 600; 1 heating coil originally located inside the vessel is no longer present; Metallic discolouration inside Volumetric volume (L): 5.700 L Pressure in tank: vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation:…
- Lägg till i varukorg
-
- Tankar
1500 liter tank i Rostfritt 304
- 78 000 SEK /st exkl moms
- Additional information: Dairy; Height-adjustable dome screws of the feet missing; hand lever of the butterfly valve missing; manhole cover not suitable for an operating pressure of 2 bar (vessel was probably last operated depressurized by the previous operator and the cover was replaced accordingly); bump at the insulation jacket; Functionality of the double jacket not checked Volumetric volume (L): 1.500…
- Lägg till i varukorg
-
- Tankar
310 liter tank i Syrafast 316
- 48 000 SEK /st exkl moms
- Additional information: Pharmacy (liquids; not hazardous to health); Test pressure: 1.5 bar; test temperature: 127° C; 1 step on the outside of the vessel; 1 head hole diameter 300 mm in the upper bottom; 2 welded brackets on the inside; small pressure points in the insulation jacket Volumetric volume (L): 310 L Pressure in tank: ATM - atmosferic Max. pressure…
- Lägg till i varukorg
-
- Tankar
21000 liter tank i Rostfritt 304
- 136 000 SEK /st exkl moms
- Additional information: Textile industry; Wall thickness of base at manhole: 4 mm; wall thickness of other base: 3 mm; insulation partially incomplete; insulating jacket partially detached or no longer complete; bump at the insulation jacket Volumetric volume (L): 21.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no…
- Lägg till i varukorg
-
- Tankar
1100 liter tank i Rostfritt 304
- 24 000 SEK /st exkl moms
- Additional information: Dairy; Manhole diameter 480 mm; minor dents in the iso jacket; iso cover of the lower base with plate made of Fe; cut-off VA parts on the outside of the vessel (see photos); minor dents in the feet; height-adjustable plastic dome screws of the feet; some residues of previous content Volumetric volume (L): 1.100 L Pressure in tank:…
- Lägg till i varukorg
-
- Tankar
8250 liter tank i Stål (emaljerad)
- 224 000 SEK /st exkl moms
- Additional information: Pharmaceutical chemistry; Support ring made of Fe; sheet metal cuts in the insulating jacket; original manhole cover is no longer present (a similar manhole cover is enclosed loose, see photos); the enamel layer is slightly chipped in places on 1 connection (see photos) Volumetric volume (L): 8.250 L Pressure in tank: vacuum Max. pressure (Bar): 6 Bar Min.…
- Lägg till i varukorg















































