Additional information: Chemistry; Tank with dents in the cylinder (vacuum damage; see photos); cylinder manhole diameter approx. 600 mm; feet ends cut off; 3 immersion pipes inside the tank; specified total height including ring line connection in the upper bottom; outlet with flanged, reducing fitting; some residues of previous content Volumetric volume (L): 28.100 L Pressure in tank: pressure Max.…
Additional information: Cosmetics; Frame, Fe (galvanized); diameter of manhole approx. 420 m; slight differences in design (e.g. manhole cover); in 1 container the upper bottom is slightly pressed in, the other container has a dent in the side wall; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A)…
Additional information: Manhole diameter: approx. 600 mmm; saddles made of Aisi 304 Volumetric volume (L): 29.250 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 0,25 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: Chemistry; Total height estimated according to drawing (deviations possible); manhole cylinder NW 600; test pressure according to drawing: 1 bar Volumetric volume (L): 67.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Solvents; Manhole cylinder NW 600; total height might deviate slightly (measures taken from drawing); some residues of previous content Volumetric volume (L): 67.000 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Solvents; Total height as per drawing (small deviation possible); manhole cylinder NW 600 Volumetric volume (L): 67.000 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Pharmacy; Different manufacturers, therefore minor differences in the design (e.g. manhole cover); different outlet valves (on the black rotary valves (see photos) outlet diameter approx. 55 mm); drawing for Eurocont available; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Max. pressure (Bar): 0,65 Bar Min. pressure (Bar): 0,15 Bar Material wet parts:…
Additional information: Pharmaceutical waste water; Manhole cylinder NW 600; some residues of previous content Volumetric volume (L): 118.000 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Pharmacy; Frame, Aisi 304; Manhole diameter approx. 505 mm; 1 small part of the containers is slightly higher with a total height of approx. 1,720 mm; smaller dents in the lower bottom; Outlets slightly pressed into the lower bottom; 1 frame strut is bent in 1 container; traces of usage Volumetric volume (L): 1.000 L Pressure in tank:…
Additional information: Pharmacy; Frame, Aisi 304; manhole diameter approx. 505 mm; outlets partially slightly curved upwards; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: 1 electric plug-in heater (4.5 kW) for heating the heating medium in the double jacket; this heating medium would have to be installed on site before commissioning Volumetric volume (L): 111 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 60 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger:…
Additional information: Food industry; Tanks are slightly out of round due to their design; tanks with small (sometimes slightly larger) dents; some of the tank feet are pressed into the lower bottom; tank lids are made of plastic (2 containers are missing lids; one lid has holes in the lid; see photos) Volumetric volume (L): 1.000 L Pressure in tank:…
Additional information: Fragrances and dyes for the beverage industry; Frame, Fe (galvanized; partially bent and with signs of corrosion); slight differences in design possible; type plates may be missing in some cases; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no…
Additional information: Pharmacy Volumetric volume (L): 1.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 72 L Max Overpressure: 6 Bar…
Additional information: Herbal pharmacy; Attention: outlet fitting extends beyond foot ends (former foot extensions are no longer available); Screws of the outlet fitting are missing; some residues of previous content Volumetric volume (L): 800 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated…
Additional information: pharmacy; frame, Aisi 304; slight metallic discoloration inside the tank; including Hilge Hygia centrifugal pump; temperature control takes place via a plug-in heater with an output of 11 KW; some residues of previous content Volumetric volume (L): 1.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C):…
Additional information: Pharmacy; Manhole DN 600; Outlet with screwed fitting; No reference to the acceptance of the double jacket in the test report on the acceptance (in a copy of drawing 1160246-1A or 1B there is the signed stamp "Tested according to AD 2000 rules from TÜV Süd); Parts of the blind screw connections may be present Volumetric volume (L):…
Additional information: Pharmacy; Max.permissible temperature in the test certificate: -10 / + 120 ° C; tank drawing in jpeg format and installation drawing available Volumetric volume (L): 280 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration:…
Additional information: chemical industry Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Type HE on the bottom: heating/cooling jacket Type HE on the cylinder: heating/cooling jacket Documents included: no Technical drawing included:…
Additional information: Tank was manufactured for a global pharmaceutical company but was never put into operation; hand hole with sight glass diameter: 285mm; incl. Südmo single-seat valve SVP (outlet) Volumetric volume (L): 1.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI…
item available on order Article type: brand new storage tank - type VC-SLO Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Dairy; Diameter manhole approx. 420 mm; Insulation around the cylinder (small dents in the insulation jacket) Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 90 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Pharmaceutical chemistry; 3 support brackets, Aisi 304; double jacket for heating/cooling around the lower cylinder area and the lower bottom (double jacket was added later and is not shown in the vessel drawing); slight differences in the design of the two vessels, e.g. differences in the manhole covers and the outlets (1 x outlet diameter approx. 53 mm,…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
