Additional information: Alcohols and/or test fuels; Frame, Fe (galvanized); slight differences in design possible; Ball valve made of brass (nickel-plated); ; some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Beer tank; Height-adjustable screws of the feet incomplete or no longer exists (this would have to be compensated accordingly on site for installation); not every tank may have a spray ball; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin…
Additional information: pharmacy; one of the containers has an additional outlet (25mm) with a butterfly valve in the cylinder (see photo); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: Chemistry; (Frame made of Fe (galvanized, partially slightly bent); cone height: approx. 446 mm; outlet consisting of 3" socket ball valve with TW male coupling VK 80 made of brass and blind cap MB 80 made of aluminum (1 container with slightly different outlet, see photos); slight differences in the design of the containers possible; container partially welded…
Additional information: Water tank in agriculture; 2 chamber tank (1 x approx. 2000 liters, 1 x approx. 1000 liters); interior height approx. 1000 mm; Opening chamber 1: approx. 1,260 x 1,330 mm, opening chamber 2: approx. 1,260 x 750 mm; Walls slightly curved outwards Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI…
Additional information: Plant based pharmacy; Manhole diameter: approx 395mm; partially defective disc valves; partial dents on some containers; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Food industry; 1 dent in the inner tank (overpressure of the no longer functional heating jacket; see photos); insulation jacket with smaller dents and partially detached plates; tank with adhesions inside; Devices for load cells under the feet (3 loose load cells are included in the scope of delivery; these were not taken into account when specifying the…
Additional information: Ice-cream produktion; support brackets made of Aisi 304; diameter manhole 420 mm Volumetric volume (L): 1.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no…
Additional information: printing ink; Insulating jacket was cut open by the previous operator and later stapled back together; 2 sheet metal cutouts in the container lid (see photos); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes…
item available on order Article type: brand new storage tank - type K2-SL Volumetric volume (L): 1.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Design pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model:…
Additional information: Wine storage; 1 manhole approx. 340 x 440 mm in the front bottom; tanks were professionally cleaned by a specialist company in 2024; walls curved outwards; Tanks with dents (see photos) Volumetric volume (L): 5.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (screwed on to enlarge the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; tank feet are partially slightly bent; 1 tank with several dents Volumetric volume…
Article type: second-hand mixing tank Additional information: we can place feet on the tanks --> feel free to inform yourself for price and possibility; we can’t give any guarantees about the agitator Volumetric volume (L): 1.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Pharmaceutical chemistry; 3 support brackets,Aisi 304; The flange ring of the manhole is made of Fe; some residues of previous content Volumetric volume (L): 2.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical…
item available on order Article type: brand new storage tank - type K3-IL Volumetric volume (L): 2.500 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile…
item available on order Article type: brand new storage tank - type K3-IL Volumetric volume (L): 2.000 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 150 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated Heat exchanger:…
Additional information: ice water tank in a dairy; some residues of previous content; pipe end cut flush Volumetric volume (L): 10.000 L Pressure in tank: pressure Max. pressure (Bar): 5 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included:…
Additional information: ethanol; bearer frame made of Fe; insulation jacket with dents and extensively nonexistent; manhole appr. 300 x 400 mm in one of the bottoms; some residues of previous content; manhole cover is missing Volumetric volume (L): 4.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no…
Additional information: fruit juice industry; Manhole appr. 345 x 440 mm; Wall thickness of the lowest cylinder segment: approx. 4.0 mm; pipe end cut flush Volumetric volume (L): 25.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included:…
item available on order Article type: brand new storage tank - type K2-SL Volumetric volume (L): 2.500 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Design pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model:…
item available on order Article type: brand new storage tank - type K2-SL Volumetric volume (L): 2.500 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Design pressure (Bar): 0,05 Bar Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304L (V2A) Model:…
Additional information: Mustard production; Manhole diameter approx. 410 mm; Frame, Fe (galvanized; struts partly slightly bent); Product adherence inside; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Chemistry; Frame, Fe (galvanized; partly slightly bent or showing signs of corrosion); slight differences in the design of the containers possible; Smaller dents in the container walls are possible in some cases; screw connections of the manhole cover partially incomplete; some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM -…
Additional information: Beverage industry; Agitator, Aisi 304 (1.4541); Feet with pedestal and screws made of Fe Volumetric volume (L): 700 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: transport tank for viscous gels; Tanks are equipped with a pump (see pictures) Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange…
Additional information: Paint industry; Frame, Fe (galvanized; partly with corrosion); slight metallic discoloration inside; 18 pieces in stock Bremen make Blefa (slight differences in design); some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: Food industry; Container with small dents; some residues of previous content; traces of usage Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; total length and total height according to drawing; Tanks have been professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves, sampling valves and manhole seals were installed Volumetric volume (L): 36.000 L Pressure in tank: ATM - atmosferic Material wet…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the cylinder; total height according to drawin); Tanks have been professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves, sampling valves and manhole seals were installed Volumetric volume (L): 24.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304…
Additional information: sparkling wine; 1 manhole approx. 320 x 420 mm in the front bottom (the manhole cover of 1 tank is missing); the type plate of 1 tank is missing; front bottom marbled on the outside; foot ends partially cut off, total height may vary slightly; some residues of previous content Volumetric volume (L): 6.200 L Pressure in tank:…
Additional information: Sparkling wine; 1 manhole approx. 320 x 420 mm in the front bottom, slight metallic discoloration inside; some residues of previous content Volumetric volume (L): 6.000 L Pressure in tank: pressure Max. pressure (Bar): 8 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the cylinder; total height according to drawing; lower bottom with slope to the outlet with cup (for installation, an appropriate foundation would have to be built on site); upper bottom and top cylinder segment made of 1.4571 (Aisi 316); Tanks have been professionally cleaned and overhauled by the…
Additional information: Sparkling wine; 1 manhole approx. 320 x 420 mm in the front bottom (one tank is missing a manhole cover); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for installation; 1 tank with a dent in the cylinder/floor transition (see photos); some residues of previous content Volumetric…
Additional information: Wine storage; 1 manhole approx. 325 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves (screwed on to reduce the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; walls curved outwards; Total height including end of plastic tube…
Additional information: Wine storage; 1 manhole approx. 325 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves (screwed on to reduce the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; walls curved outwards Volumetric volume (L): 6.100 L Pressure in…
Additional information: Sparkling wine; 1 manhole approx. 320 x 420 mm in the front bottom (the manhole cover of 1 tank is missing); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for installation; the thread of the outlet of 1 tank is damaged; some residues of previous content Volumetric…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; 2 slightly different versions: version 1 with stackable frame in top and a reinforcement rod inside can be used to stack version 2 (without frame) on top; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (screwed on to enlarge the…
Additional information: pharma; Floor frame, V2A; manhole diameter approx. 250mm; immersion tube Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (screwed on to enlarge the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; 1 former connection was welded shut on top of the tank by the…
Article type: second-hand storage tank Additional information: There is still a bit of salt in the tank. Please look at the pictures. Volumetric volume (L): 38.000 L Pressure in tank: ATM - atmosferic Material wet parts: polyester (fiberglass) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: strong…
Article type: second-hand pressure tank Additional information: The tanks have never been used. Volumetric volume (L): 185 L Pressure in tank: pressure Max. pressure (Bar): 6 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Chemistry; Partly small dents Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: headside…
item available on order Article type: brand new storage tank - type K3-IL Volumetric volume (L): 5.200 L Max. density P (kg/m³): 1.500 Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile…
Additional information: Cosmetics; Frame, Fe (galvanized); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position…
Additional information: Beer tanks; 1 hand hole approx. 190 x 240 mm in the front bottom (hand hole cover made of plastic); 2 loose foot frames, Aisi 304 (2 different versions of the foot frames, as the previous operator's tanks were stored on top of each other); total height depending on the design of the foot frame approx. 1,000 -…
Additional information: colours & coatings; Manhole diameter: approx. 395 mm; ; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Solvents; Frame, Fe (galvanized); slight differences in design possible; Manhole diameter approx. 460 mm; partially smaller dents; Blind caps of the outlet are partially missing; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: Spirits; Slight metallic discoloration inside the tank Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position…
Additional information: bioethanol plant; support ring made of Fe; manhole covers are missing Volumetric volume (L): 11.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange…
item available on order Article type: brand new palletized transporttank (not ADR) - type IBC-PL Additional information: We can take more containers in production for you. These standardised PL IBC containers EW10.008V4N which we offer from our stock are applicable for food use. The tanks have a butterfly valve instead of a ball valve. Volumetric volume (L): 1.000 L Max.…
Additional information: Brewery; 1 manhole approx. 300 x 395 mm in the front bottom; 3 loose bearing shells, Fe; 1 dent in the transition cylinder/front bottom (see photos) Volumetric volume (L): 13.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: N-Heptane; Manhole diameter approx. 410 mm; side walls in "trapezoidal sheet design" (basic external dimensions approx. 1200 x 900 mm); internal height approx. 2,000 mm Volumetric volume (L): 2.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: Hand hole diameter: approx. 140mm with sight glass Volumetric volume (L): 500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no…
Article type: second-hand storage tank Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: square Bottom type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable feet Fixation point(s): RVS…
Additional information: Food industry; Partly slightly larger residues of fruit pulp inside; some residues of previous content; traces of usage Volumetric volume (L): 600 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 0,15 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: brewery; Exact dimensions may vary slightly, 3 legs of 2 tanks were shortened during dismantling (these are included loose and can be welded back on site) Volumetric volume (L): 69.000 L Pressure in tank: pressure Max. pressure (Bar): 6 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Chemistry; Frame, Fe (galvanized); outlet 2"; small dents possible; certificates of inspection mostly available (for 5 the of the containers is stated in the certificates of inspection as material AISI 304; however, the nameplate says AISI 316 and subsequent measurements also showed AISI 316); some residues of previous content; traces of usage Volumetric volume (L): 1.251 L Pressure…
Additional information: Beverage industry; some residues of previous content Volumetric volume (L): 1.178 L Pressure in tank: pressure Max. pressure (Bar): 4 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for…
Additional information: Yoghurt tank in a dairy; Double chamber tank (2 x 40,000 liters); cylinder height 2 x 4600 mm; Manhole approx. 410 x 510 mm; upper tank in the upper bottom leaking; Ready for collection from around the end of July Volumetric volume (L): 80.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,20 Bar Min. pressure…
Article type: second-hand storage tank Additional information: The wheels, manhole flange and closures for the manhole are missing, a new lid with closures = €1900; Special flange on the outlet, we can adjust this to a connection of your choice, this costs €474. We can modify the tank for you, contact us without obligation for your quote. Volumetric volume (L):…
Article type: second-hand storage tank Additional information: The casters and some of the closures for the manway are missing. Special flange on the outlet, we can adjust this to a connection of your choice, this costs €474. We can modify the tank for you, contact us without obligation for your quote. Volumetric volume (L): 300 L Ra inner weld: 0,80…
Article type: second-hand storage tank Additional information: Some of the closures for the manway are missing. Special flange on the outlet, we can adjust this to a connection of your choice, this costs €474. We can modify the tank for you, contact us without obligation for your quote. Volumetric volume (L): 300 L Ra inner weld: 0,80 Pressure in tank:…
Additional information: Brewery Volumetric volume (L): 2.300 L Pressure in tank: pressure Max. pressure (Bar): 2,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: cylinder…
Additional information: Solvents; Manufacturer's description available; No bottom outlet Volumetric volume (L): 204 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no Documents included: no Technical drawing included: no Registration plate on…
Additional information: Methanol; Frame, Fe (galvanized); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position…
Additional information: water; manhole approx. 350 x 450 mm in the front bottom; one tank (9540-1) with a small dent under the wooden cradle, one tank (9540-2) without a nameplate, up to 4 additional identical tanks could be made available upon request. The following saddle feet can be purchased separately for the tank: https://www.beiser-agrar.de/loschwassertank-sattelfuse-fur-tank-aus-metall-3000mm-p-523.html Volumetric volume (L): 70.800 L Pressure…
Additional information: Cosmetics; Total height estimated (deviations possible); Agitator supports may need to be relined for installation; Diameter outlet end approx. 35 mm; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: Alcohols and/or test fuels; Frame, Fe (galvanized; partly slightly bent); slight differences in design possible; Ball valve made of brass (nickel-plated); Diameter manhole approx. 420 mm (for 1 container the manhole is slightly pressed into the upper bottom; see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS…
Additional information: Vapor water tank (dairy); exact dimensions may vary slightly; riveted insulation is damaged in some places (see pictures); The bottom of the tank is filled with concrete; some residues of previous content Volumetric volume (L): 50.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation:…
Additional information: Winery; With 1 tank, the cylinder is marbled on the outside Volumetric volume (L): 11.800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange…
Additional information: Food industry; Mobile frame, Aisi 304 with 4 plastic wheels; Manhole diameter 850 mm with loose cover; slight differences in the design of the containers possible; traces of usage Volumetric volume (L): 570 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: food (wine); Aluminum frame (a strut on one container is bent; see photos); 2 of the containers with butterfly taps (not quite complete anymore); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: frame Fe (galvanized) Volumetric volume (L): 1.023 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): galvanised steel Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Brewery; Tanks screwed into frame, Aisi 304; 1 hand hole diameter approx. 350 mm in the front base (hand hole cover made of plastic) Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Beer tank; Height-adjustable screws of the feet incomplete (this would have to be compensated accordingly on site for installation); Not every tank may have a spray ball; some residues of previous content Volumetric volume (L): 900 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation:…
Article type: second-hand storage tank Volumetric volume (L): 1.750 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical Bottom type: dished Total discharge: yes Fixation points: non adjustable feet Fixation point(s): RVS 304 Suitable for food industry: yes Documents…
Additional information: Cosmetics; Cone height approx. 1250 mm; some residues of previous content; Metallic discolouration inside Volumetric volume (L): 3.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,30 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Article type: second-hand storage tank Volumetric volume (L): 7.500 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 50 °C Material wet parts: SS AISI 304L (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical Wall type: dished Total discharge: no Fixation points: 2 non adjustable feet Manway(s): RVS 304L Gasket…
Article type: second-hand transport tank Additional information: Compound feed containers, not suitable for liquids, sliding flap 520mm x 420mm Volumetric volume (L): 2.000 L Max. density P (kg/m³): 500 Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304L (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: flat Shape of tank:…
Additional information: Beer tank; some residues of previous content Volumetric volume (L): 900 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet…
Additional information: Dairy; Minor differences in the design of the two tanks (e.g. location of the outlets); Manhole diameter approx. 510 mm; a former manhole and 1 connection in the lower cylinder area were welded shut by the previous operator; 1 tank with a smaller dent in the insulating jacket; see photos Volumetric volume (L): 8.000 L Pressure in tank:…
Additional information: Beer tank; Tank lies loosely in a frame, Aisi 304; 1 manhole approx. 320 x 415 mm in the front bottom Volumetric volume (L): 1.020 L Pressure in tank: pressure Max. pressure (Bar): 3,90 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Cosmetics; Tank 1: smaller dents in the lower bottom, manhole diameter approx. 430 mm (loose manhole cover), total height lower (approx. 1,450 mm); Tank 2: manhole diameter approx. 500 mm; tank with stronger dents; see photos Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin…
Additional information: Cosmetics; Accessible frame, Aisi 304 Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway:…
Additional information: Tank blasted and primed on the outside; Manhole diameter approx. 510 mm; 5 round connections in the lower bottom; 1 strong dent in the insulation jacket; former connections in the upper bottom cut off (see photos) (see photos) Volumetric volume (L): 4.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Brewery; Tanks loose - frame no longer present; 1 manhole diameter approx. 400 mm in the front bottom (manhole cover fastening screws damaged) Volumetric volume (L): 1.050 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: Beer tank; Loose frame, Aisi 304; 1 hand hole approx. 230 x 235 mm in the front bottom (hand hole cover made of plastic); 1 pipe inside the tank Volumetric volume (L): 1.027 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation:…
Additional information: Beer storage; Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inner pipe diameter approx. 44 mm, 1 tank outlet inner pipe diameter approx. 35 mm, for one tank…
Additional information: Brewery; Tanks loose on frames, Aisi 304 (different versions of the frames, some screwed together; see photos); 1 hand hole each approx. 190 x 240 mm in the front bottom (plastic hand hole cover) Volumetric volume (L): 500 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration:…
Additional information: Brewery; Tanks loose on frames, Aisi 304 (different versions of the frames, some screwed together; see photos); 1 hand hole each approx. 190 x 240 mm in the front bottom (plastic hand hole cover) Volumetric volume (L): 500 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration:…
Article type: second-hand mixing tank Additional information: The legs of the tank have been cut off and are supplied separately, please look carefully at the photos.; we can’t give any guarantees about the agitator Volumetric volume (L): 7.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation:…
Article type: second-hand mixing tank Additional information: we can’t give any guarantees about the agitator Volumetric volume (L): 6.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical Bottom type: strong conical Total discharge: yes Fixation points: 3 non…
Article type: second-hand mixing tank Additional information: Please look carefully at the photos, In 2 of the 3 tanks there is still some grease on the inner wall .; we can’t give any guarantees about the agitator Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat…
Additional information: Putty; Frame, Aisi 304; Manhole diameter approx. 410 mm; 1 filling tube inside the container; some residues of previous content; traces of usage Volumetric volume (L): 1.011 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Article type: second-hand storage tank Additional information: the tanks have never been used Volumetric volume (L): 22.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical Wall type: conical Total discharge: yes Fixation points: 4 non adjustable feet Manway(s):…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of…
Additional information: Putty; Small dents in the insulation jacket; outlet fitting incomplete; one of the feet is pressed into the inner bottom (see photos); some residues of previous content Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1,99 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI…
Additional information: Brewery; Height-adjustable screws of the feet are partially missing (they would have to be retrofitted on site for installation, otherwise the outlet would be lower than the feet); Tanks inside partly with metallic discoloration; 2 tanks with dents in the cylinder/upper bottom transition (see photos) Volumetric volume (L): 900 L Pressure in tank: ATM - atmosferic Material wet…
Additional information: Pharmacy; Frame, Aisi 304; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position…
