Additional information: Sorbitol tank in the food industry; 1 partition (with openings) in the middle of the tank divides the cylinder length of 5000 mm into 2 x 2,500 mm; lower area in the inner tank straight instead of round due to the design; both tank chambers with a manhole diameter 450 mm; 1 chamber with an outlet DN 65…
Additional information: Hand hole diameter 200 mm; Foot frame, Aisi 304 with upper ring made of Fe; other external parts made of Fe (e.g. heating connections; el clamp screws of the upper bottom); double jacket by approx. 600 mm of the cylinder height; 1 small dent in the upper bottom; some residues of previous content Volumetric volume (L): 500 L…
Additional information: Frame, Fe; Tank open at the top with a loose lid segment (see photos) Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Spirits; Adhesions and metallic discoloration inside the tank; lower bottom with smaller dents Volumetric volume (L): 1.700 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank:…
Additional information: Spirits; Manhole appr. 320 x 425 mm (Fastening of the manhole cover incomplete) Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank:…
Additional information: Lacquers; Manhole diameter 500 mm; Small dents in the cylinder; Differences in the outlet sizes possible; some residues of previous content Volumetric volume (L): 10.600 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 100 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Brewery; some residues of previous content; Metallic discolouration inside Volumetric volume (L): 24.400 L Pressure in tank: pressure Max. pressure (Bar): 4 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 114 L Max Overpressure:…
Additional information: Ethanol; 1 manhole approx. 340 x 440 in the front bottom; Test pressure according to the nameplate 2 bar; some residues of previous content Volumetric volume (L): 2.645 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: Food industry; According to the nameplate operating pressure 1 bar; However, the nameplate is only present on some of the containers; slight differences in the design of the container (e.g. manhole cover; feet); Container with some (smaller) dents; some residues of previous content; traces of usage Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material…
Additional information: Beverage industry Volumetric volume (L): 21.400 L Pressure in tank: pressure Max. pressure (Bar): 4,50 Bar Max. temperature (°C): 20 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 205 L Max Overpressure: 1,50 Bar Max. working temperature: 20 °C…
Additional information: Spirits; Manhole appr. 300 x 440 mm; Level indicator incomplete; Butterfly valve screwed to the outlet (for 1 tank DN 50, for the other tank DN 40); 1 lifting eye in the upper bottom; some residues of previous content; scratches inside Volumetric volume (L): 1.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304…
Additional information: Pharmacy; Outlet fitting incomplete (see photos); Technical documentation is available from the manufacturer and can be requested and purchased there Volumetric volume (L): 400 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 165 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with…
Additional information: Pharmacy; Double jacket, Aisi 304 around the cylinder and lower bottom; lower heating connection was welded shut by the previous operator; 2 feet were cut off by the previous operator (are loosely enclosed); some residues of previous content; bump at the insulation jacket Volumetric volume (L): 2.335 L Pressure in tank: ATM - atmosferic Material wet parts: SS…
Additional information: Food industry; Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 circular opening in the upper bottom Volumetric volume (L): 630 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Food industry; Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as smaller metal sheet cut outs in the insulation jacket (see photos); Feet / height-adjustable screws made of mild steel (with stainless…
Additional information: Fruit juice; Manhole approx. 320 x 420 mm; 1 tanks with smaller dents, 2 tanks with strong dents (1 with small cracks in one of the dents); height-adjustable screws of the feet are partially missing Volumetric volume (L): 16.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat…
Additional information: Fruit juice; Upper tank part with slope; 1 manhole approx. 345 x 440 mm in the front bottom; walls slightly curved outwards (see photos); Metallic discolouration inside Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Chemistry (toluene); Frame Fe (galvanized; lacquered); according to the manufacturer, ADR test papers are available and, if required, can be requested there using the serial number; traces of usage Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Cosmetics; Frame Fe, lacquered (corrosion); hand hole diameter approx. 300 mm; some residues of previous content Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Pharmacy; Manhole DN 600; 1 heating coil originally located inside the vessel no longer exists; Metallic discolouration inside Volumetric volume (L): 5.700 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no…
Additional information: Dairy; Height-adjustable screws of the feet are missing; hand lever of the butterfly valve is missing; Manhole cover not suitable for an operating pressure of 2 bar (vessel was probably operated without pressure by the previous operator and the cover was replaced accordingly); bump at the insulation jacket; Functionality of the double jacket not checked Volumetric volume (L):…
Additional information: Pharmacy (liquids; not hazardous to health); Test pressure: 1.5 bar; Test temperature: 127 ° C .; 1 step on the outside of the tank; 1 head hole diameter 300 mm in the top bottom; 2 welded brackets inside; small dents in the insulation jacket Volumetric volume (L): 310 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar…
Additional information: Double jacket around the lower cylinder area and the lower bottom; Manhole diameter approx. 415 mm; some residues of previous content Volumetric volume (L): 1.600 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Type…
Additional information: Lid rim slightly bent in places; Fastening screws of the cover segment are bent; Wall thickness of the hinged segment of the tank cap approx. 2 mm; some residues of previous content Volumetric volume (L): 2.740 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration:…
