Additional information: Herbal pharmacy; Attention: outlet fitting extends beyond foot ends (former foot extensions are no longer available); Screws of the outlet fitting are missing; some residues of previous content Volumetric volume (L): 800 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated…
Additional information: pharmacy; frame, Aisi 304; slight metallic discoloration inside the tank; including Hilge Hygia centrifugal pump; temperature control takes place via a plug-in heater with an output of 11 KW; some residues of previous content Volumetric volume (L): 1.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C):…
Additional information: Pharmacy; Manhole DN 600; Outlet with screwed fitting; No reference to the acceptance of the double jacket in the test report on the acceptance (in a copy of drawing 1160246-1A or 1B there is the signed stamp "Tested according to AD 2000 rules from TÜV Süd); Parts of the blind screw connections may be present Volumetric volume (L):…
Additional information: Brewery; Tanks screwed into frame, Aisi 304; 1 hand hole diameter approx. 350 mm in the front base (hand hole cover made of plastic) Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Article type: second-hand pressure tank Additional information: The tanks have never been used Volumetric volume (L): 2.000 L Pressure in tank: pressure Design pressure (Bar): 4,30 Bar Max. pressure (Bar): 3 Bar Max. temperature (°C): 20 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Pharmacy; The previous operator had the vessels hanging in a ring with load cells that was embedded in the ground (1 ring of each is included in the delivery; see photos); Outer diameter in the ring approx. 1,540 mm; insulating jacket made of material 1.0425 Volumetric volume (L): 885 L Pressure in tank: pressure and vacuum Max. pressure…
Additional information: Pharmacy Volumetric volume (L): 920 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 70 L Max Overpressure: 6 Bar…
Additional information: Pharmacy Volumetric volume (L): 550 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 135 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 67 L Max Overpressure: 2 Bar Max. working temperature: 135 °C Type HE…
Additional information: pharma; Floor frame, V2A; manhole diameter approx. 250mm; immersion tube Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no…
Additional information: Beer tanks; 1 hand hole approx. 190 x 240 mm in the front bottom (hand hole cover made of plastic); 2 loose foot frames, Aisi 304 (2 different versions of the foot frames, as the previous operator's tanks were stored on top of each other); total height depending on the design of the foot frame approx. 1,000 -…
Additional information: Dairy; Probably 3 cooling rings around the cylinder; heating connections cut off; 1 former manhole in the lower cylinder area was welded shut by the previous operator; foot ends were cut off when the tank was dismantled and are loose (with small dents; see photos); dents at the insulation jacket; pipe end cut flush Volumetric volume (L): 19.600…
Additional information: Cosmetics; 4 support brackets, stainless steel; Total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank; 1 dirt protection collar on the outside over the support brackets (diameter approx. 1,740 mm) Volumetric volume (L): 1.410 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max.…
