Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
Additional information: Brewery; 2 of the feet with damage; outlet at the end, pipe diameter inside approx. 65 mm (outlet pipe tapers at the beginning to a diameter of approx. 50 mm); Toggle screw of the manhole cover made of Fe (see photos) Volumetric volume (L): 3.900 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Configuration: single-skin Heat…
Additional information: Pharmacy; Half-coil around approx. 900 mm of the cylinder height; Smaller dents in the insulation jacket; Metallic discolouration inside Volumetric volume (L): 4.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total…
Additional information: Pharmacy; Manhole DN 600; Parts of the blanking plugs may be present Volumetric volume (L): 5.050 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 135 °C Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no…
Additional information: Cosmetics; Flanged to the outlet 1 reduction to diameter 65 mm; 1 dip tube inside the tank; 1 pallet with accessories (foot platforms, fittings, etc.) is included in the scope of delivery; these accessories were not taken into account in the stated total height Volumetric volume (L): 5.600 L Pressure in tank: pressure and vacuum Max. pressure (Bar):…
Additional information: Water for injections in pharmacy; Manhole DN 500; Feet were shared from the previous operator to allow the tank to be placed in a lower space Volumetric volume (L): 5.650 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 144 °C Configuration: insulated Heat exchanger: no Insulation:…
Additional information: Pharmacy; Manhole DN 600; Outlet with screwed fitting; No reference to the acceptance of the double jacket in the test report on the acceptance (in a copy of drawing 1160246-1A or 1B there is the signed stamp "Tested according to AD 2000 rules from TÜV Süd); Parts of the blind screw connections may be present Volumetric volume (L):…
Additional information: Pharmacy; Manhole DN 600; Parts of the blanking plugs may be present Volumetric volume (L): 6.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 135 °C Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no…
Additional information: Dairy; Probably 3 cooling rings around the cylinder; heating connections cut off; 1 former manhole in the lower cylinder area was welded shut by the previous operator; foot ends were cut off when the tank was dismantled and are loose (with small dents; see photos); dents at the insulation jacket; pipe end cut flush Volumetric volume (L): 19.600…
Additional information: Chemistry; Manhole cylinder diameter 500 mm (most of the manhole cover screws are missing); 1 tank has 1 foot pressed into the lower bottom and the other tank has 2 feet pressed into the lower bottom; (this tank also has 1 connection pressed into the upper bottom and the heating coil is pressed in at one point; the…
Additional information: Brewery Volumetric volume (L): 47.900 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: available Internal diameter tank: 3.200 mm Cylinder height: 4.800 mm…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
