Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
Additional information: Pharmacy; Double jacket, Aisi 304 around the cylinder and lower bottom; lower heating connection was welded shut by the previous operator; 2 feet were cut off by the previous operator (are loosely enclosed); some residues of previous content; bump at the insulation jacket Volumetric volume (L): 2.335 L Pressure in tank: ATM - atmosferic Material wet parts: SS…
Additional information: Pharmaceutical chemistry; The drawing is a standard drawing; slight deviations are possible; 2 support brackets, Aisi 304; Double jacket made of 1.4541 (Aisi 304) around the lower cylinder area and the lower bottom Volumetric volume (L): 2.355 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200…
Additional information: Fragrance production (alcoholic scents); 2 loose bearing shells made of Fe; 1 manhole approx. 300 x 400 mm in the front bottom (bracket of the manhole cover made of aluminium); Inner length: approx. 2,520 mm; Inner width: approx. 720 mm; Inner height: approx. 1,480 mm Volumetric volume (L): 2.400 L Pressure in tank: ATM - atmosferic Material wet…
Additional information: Brewery; Manhole approx. 345 x 455 mm; 1 dent in the insulation jacket (see photos); some residues of previous content Volumetric volume (L): 2.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on…
Additional information: Aluminum chlorides; some residues of previous content Volumetric volume (L): 2.400 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,50 Bar Min. pressure (Bar): 0,20 Bar Max. temperature (°C): 55 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no…
Additional information: Brewery; Loose lid with hinged segment; some residues of previous content Volumetric volume (L): 2.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the cylinder: heating/cooling jacket Documents included: no Technical drawing…
Additional information: Fragrance production (alcoholic scents); 2 loose, height-adjustable bearing shells made of Fe; 1 manhole approx. 300 x 400 mm in the front bottom; Inner length: approx. 2,560 mm; Inner width: approx. 720 mm; Inner height: approx. 1,470 mm Volumetric volume (L): 2.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Pharmaceutical Chemistry; Manhole DN 350/450 (sight glass in the manhole cover is missing); support ring, Fe; Flanges partly made of Fe Volumetric volume (L): 2.420 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single…
Additional information: Pharmaceutical chemistry; Manhole DN 350/450 (manhole cover incomplete); Support ring, Fe; Flanges partially Fe Volumetric volume (L): 2.420 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Fragrance production (alcoholic scents); 2 loose, height-adjustable bearing shells, Aisi 304; 1 manhole approx. 345 x 440 mm in the front bottom; partially 1 lifting eyelet on top of the tank; Inner length: approx. 2,580 mm; Inner width: approx. 720 mm; Inner height: approx. 1,470 mm; Indication of total height as in the photo (without taking into account…
Additional information: Brewery Volumetric volume (L): 2.470 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: cylinder…
Additional information: Food utilization; stronger buildups; sight glass in the cylinder; various connections in the upper bottom and cylinder Volumetric volume (L): 2.480 L Pressure in tank: vacuum Min. pressure (Bar): 1 Bar Max. temperature (°C): 50 °C Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Wine storage; 1 manhole in the front bottom; Tank 1 with stacking device (can be used to stack Tank 2 (without stacking device); tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (DN 50 DIN 11851 with butterfly valve; actual tank outlet with smaller diameter (probably DN 40)) and manhole seals were installed; tanks…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; 2 slightly different versions: version 1 with stackable frame in top and a reinforcement rod inside can be used to stack version 2 (without frame) on top; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (screwed on to enlarge the…
Additional information: Pharmaceutical chemistry; 3 support brackets,Aisi 304; The flange ring of the manhole is made of Fe; some residues of previous content Volumetric volume (L): 2.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Chemistry Volumetric volume (L): 2.500 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: available Cylinder height: 1.380 mm Total height of tank: 2.900 mm
Additional information: Cosmetics; Manhole diameter approx. 390 mm; some residues of previous content Volumetric volume (L): 2.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange…
Additional information: Cosmetics; Basic dimensions inside: approx. 1,100 x 1,100 mm; Internal wall height: approx. 2,150 mm; light protective paint on the outside (no longer completely complete); Manhole diameter approx. 490 mm; slight differences in execution, e.g. B. manholes and outlets; Diameter of residual emptying mostly 25 mm (sometimes 50 mm); 2 tanks without level indicator; some residues of previous…
Additional information: Food; Double jacket in the underbody not operational Volumetric volume (L): 2.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 50 L Max Overpressure: 3 Bar Max. working temperature: 140 °C Type HE on…
Additional information: Chemistry; Manhole diameter approx. 460 mm; outlet probably DN 50 reduced to approx. 15 mm by flanged fitting; 2 dip pipes inside the tank Volumetric volume (L): 2.500 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on…
Additional information: Chemistry; 4 loose foot extensions made of stainless steel are included; some residues of previous content; Metallic discolouration inside Volumetric volume (L): 2.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 6 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with…
Additional information: Cosmetics; Foot ends cut off (see photos); motor-/gear is missing; pipe end cut flush Volumetric volume (L): 2.500 L Pressure in tank: pressure Max. pressure (Bar): 1 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: chemistry Volumetric volume (L): 2.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position of manway: cylinder Outlet of tank:…
Additional information: adhesive production; frame Fe (with corrosion); rectangular opening appr. 490 x 590 mm in the upper bottom; some residues of previous content; motor-/gear is missing Volumetric volume (L): 2.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
