Additional information: food industry Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position of manway: headside Outlet of…
Additional information: Pharmacy; 2 sight glasses in the cylinder no longer present; feet made of Fe, painted (with reinforcements made of st. st.); A pipe with a diameter of approx. 25 mm runs off the outlet pipe (see photos); some residues of previous content Volumetric volume (L): 420 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI…
Additional information: Pharmacy; Diameter of manhole approx. 385 mm; slight differences in design; 1 container with a type plate (hard to read) and with outlet, pipe diameter inside approx. 35 mm (this container has a smaller dent in the cylinder/lower bottom transition) Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A)…
Additional information: Pharmacy; Diameter of hand hole approx. 350 mm; slight signs of corrosion inside; some residues of previous content Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no…
Additional information: Protective varnish; Frame, Fe (galvanized); diameter of manhole approx. 390 mm; ball of the ball valve made of plastic (probably Teflon); some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Fixing varnish; Frame, Fe (galvanized); diameter of manhole approx. 415 mm (container with screwed screw holder made of Fe (galvanized) around the manhole collar); fastening screws of the manhole cover incomplete; dents in the lower bottom (see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316…
Additional information: Cosmetics; Frame, Fe (galvanized); diameter of manhole approx. 415 mm ( the fastening screws of the manhole cover are made of Fe (galvanized; with signs of corrosion); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Fixing varnish; Frame, Fe (galvanized); diameter of manhole approx. 415 mm (for 2 containers, the fastening screws of the manhole cover are made of Fe (galvanized; with signs of corrosion); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no…
Additional information: Chemistry; Total height estimated according to drawing (deviations possible); manhole cylinder NW 600; test pressure according to drawing: 1 bar Volumetric volume (L): 67.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Wine storage; 1 manhole approx. 300 x 390 mm in the front bottom; basic dimensions inside approx. 1,210 x 830 mm; internal height approx. 1,120 mm; container feet partially slightly bent; the tank with our order number 9671 can be stacked on this tank; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves and…
Additional information: Wine storage; 1 manhole approx. 300 x 390 mm in the front bottom; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851 Volumetric volume (L): 350 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: Wine storage; 1 manhole approx. 300 x 400 mm in the front bottom; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851; cutting residues from 2 cut-off stainless steel parts on the outside of the cylinder (see photos) Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Material wet parts:…
Additional information: Food industry; Tanks are slightly out of round due to their design; tanks with small (sometimes slightly larger) dents; some of the tank feet are pressed into the lower bottom; tank lids are made of plastic (2 containers are missing lids; one lid has holes in the lid; see photos) Volumetric volume (L): 1.000 L Pressure in tank:…
Additional information: Rinse water tank (Cip system) in a dairy; Cone height approx. 1000 mm; manhole approx. 430 mm (slightly unround); dents in the upper bottom; insulation jacket cut open at the end of the cone bottom (see photos); some residues of previous content; bump at the insulation jacket; pipe end cut flush Volumetric volume (L): 2.000 L Pressure in…
Additional information: Fruit juice industry; Frame, Aisi 304; Container with dents, especially in the lower bottom; stack struts partially bent; 1 DN 40 connection in the container wall (see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: Brewery; Probably 1 spray ball inside each tank Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no…
Article type: second-hand pressure tank Additional information: Full vacuum -1 bar; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 1.500 L Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -1 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no…
Additional information: plant extracts; Diameter manhole upper bottom approx. 410 mm; slight metallic discoloration inside the tanks; some residues of previous content Volumetric volume (L): 6.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Egg products; Dents possible; Frame Fe (galvanized; partly bent); Nameplate partially present; outlet sizes could partly differ; butterfly valves may partially no longer be functional; traces of usage Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: textile industry; 1 pipeline for cleaning in the upper cylinder area; screw-nuts of the cover screws welded; agitator was removed meanwhile and is enclosed loose; some residues of previous content Volumetric volume (L): 20.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Dairy; Insulation around the upper bottom and cylinder, not the lower bottom; spray ball connection slightly bent and weld seam in the upper bottom torn (see pictures); outlet diameter pipe inside approx. 50 mm spreads to approx. 65 mm towards its cut end Volumetric volume (L): 14.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS…
Additional information: ylinder flanged; 1 filter insert and hoses inside the tank (see photos); 1 lifting eye in the upper bottom; some residues of previous content Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: 4 support brackets, Fe; cone height appr. 1400 mm; 2 open connections in the cylinder (see photos); some residues of previous content Volumetric volume (L): 15.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no…
Additional information: chemical industry Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Type HE on the bottom: heating/cooling jacket Type HE on the cylinder: heating/cooling jacket Documents included: no Technical drawing included:…
