Additional information: 1 immersion sleeve for PT 100 probe inside the tank Volumetric volume (L): 3.331 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 17 L Max Overpressure: 3 Bar Max.…
Additional information: Dairy; Diameter manhole appr. 415 mm; dents at the insulation jacket Volumetric volume (L): 900 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the bottom: heating/cooling jacket Type HE on the cylinder:…
Additional information: Food additives; Frame, Fe (galvanised; frames partially slightly bent and with slight signs of corrosion, especially in the outlet area); Thermoplate, Aisi 304 for heating/cooling around the lower bottom and over half the cylinder height; small dents in the bottom of the inner container (overpressure heating jacket); smaller dents in the insulating jacket (at least 1 container with…
Article type: second-hand pressure tank Additional information: Total height legs inclusive but without gear motor is 5250mm ; Gear motor present, though without shaft and propellor.; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 5.570 L Ra inner weld: 0,80 Pressure in tank: pressure and vacuum Design pressure (Bar): 0 Bar Max. pressure (Bar): 4 Bar…
Additional information: Beverage industry; Smaller dents on feet and outlet; the hight adjustable screws of the feet and the toggle screw of the manhole cover are missing; some residues of previous content; bump at the insulation jacket Volumetric volume (L): 3.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with…
Additional information: Heating coil on the cylinder below; manhole diameter 500 mm; Insulation jacket with smaller dents, paintwork has partially come off; tank bolted to trolley made of Fe (trolley with signs of corrosion); Adhesions inside the tank Volumetric volume (L): 2.050 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 4 Bar Min. pressure (Bar): 0,80 Bar Max.…
Additional information: Pharmacy; Tank was rebuilt in 2011; further technical documents available Volumetric volume (L): 1.229 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total…
Additional information: Rapeseed oil; Manhole cylinder NW 600; smaller sheet metal cutouts in the insulation jacket; bump at the insulation jacket; manhole cover plated Volumetric volume (L): 60.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1,50 Bar Min. pressure (Bar): 0,20 Bar Max. temperature (°C): 200 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration:…
Additional information: Pharmacy; Fame, Fe (galvanized); 1 container with small dents inside the container, the other container with dents inside and in the insulation jacket; According to the manufacturer, the double jacket can be operated at up to 6.0 bar at 120 °C (Behälter KG does not guarantee this, as it is not noted in the drawing)."; some residues of…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: Pharmacy; Double jacket with electric plug-in heater: 9 kW (incomplete; functionality not guaranteed); presumably the lower cylinder area of the tank can also be heated; manhole approx. 310 x 420 mm; Internal fittings (e.g. welded brackets) inside the tank; some residues of previous content Volumetric volume (L): 3.533 L Pressure in tank: ATM - atmosferic Max. temperature (°C):…
