Additional information: Beer tanks; 1 hand hole approx. 190 x 240 mm in the front bottom (hand hole cover made of plastic); 2 loose foot frames, Aisi 304 (2 different versions of the foot frames, as the previous operator's tanks were stored on top of each other); total height depending on the design of the foot frame approx. 1,000 -…
Additional information: Dairy; Double jacket with trickle ring - only suitable for unpressurized tempering; in some cases, the welding of the double jackets has become slightly loose in the upper area; on request - up to 5x more vessels available (external storage) Volumetric volume (L): 16.150 L Pressure in tank: pressure Max. pressure (Bar): 3,20 Bar Max. temperature (°C): 150…
Additional information: Dairy; Probably 3 cooling rings around the cylinder; heating connections cut off; 1 former manhole in the lower cylinder area was welded shut by the previous operator; foot ends were cut off when the tank was dismantled and are loose (with small dents; see photos); dents at the insulation jacket; pipe end cut flush Volumetric volume (L): 19.600…
Additional information: Brewery; 1 manhole approx. 360 x 440 mm in the front bottom; 3 loose bearing saddles each made of Fe (galvanized); 1 cut-off connection diameter 100 mm at the bottom of the cylinder; 1 tank with a larger dent in the cylinder/bottom transition as well as several smaller dents; 1 other tank with dents in the cylinder (see…
Additional information: Cosmetics; Vessel lid can be lifted with lifting frame; Vessel stands on 2 feet and is also attached to the lifting frame; Total height indicated is estimated; Manhole diameter approx. 440 mm; 1 heating connection cut off; 1 dirt protection collar around the outside of the vessel (diameter approx. 1,870 mm) Volumetric volume (L): 2.911 L Pressure in…
Additional information: Cosmetics; 4 support brackets, stainless steel; Total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank; 1 dirt protection collar on the outside over the support brackets (diameter approx. 1,740 mm) Volumetric volume (L): 1.410 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Cosmetics; 4 support brackets, stainless steel; Total height is estimated; 1 heating connection cut off; slight metallic discoloration inside the tank Volumetric volume (L): 2.900 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated…
Additional information: Cosmetics; 4 support brackets, stainless steel; Total height is estimated; slight metallic discoloration inside the tank Volumetric volume (L): 1.410 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes…
Additional information: Pharmacy; Original drawing available; tank was rebuilt in 1997 (e.g. changing the feet or connections); Evidence of the subsequent pressure test available; Conversion drawing only available as a fax; 1 dip tube inside the tank; some residues of previous content Volumetric volume (L): 530 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure…
Additional information: Food industry; Partly slightly larger residues of fruit pulp inside; some residues of previous content; traces of usage Volumetric volume (L): 600 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 0,15 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: brewery; Exact dimensions may vary slightly, 3 legs of 2 tanks were shortened during dismantling (these are included loose and can be welded back on site) Volumetric volume (L): 69.000 L Pressure in tank: pressure Max. pressure (Bar): 6 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Pharmacy; The tank was rebuilt at the end of 2012 (socket welding and shortening of the feet; test certificate from TÜV is available; the drawing provided in the appendix is the original drawing; 1 dent in the insulating jacket Volumetric volume (L): 1.344 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar):…
5000 liter tank i Syrafast 316 är en pålitlig tank för industriella behov. Den är rymmer 5000 liter, tillverkad i Syrafast 316, i begagnat skick, modell Horisontell och ger lång livslängd. Perfekt för professionell användning.
Additional information: Beverage industry; some residues of previous content Volumetric volume (L): 1.178 L Pressure in tank: pressure Max. pressure (Bar): 4 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for…
Additional information: Yoghurt tank in a dairy; Double chamber tank (2 x 40,000 liters); cylinder height 2 x 4600 mm; Manhole approx. 410 x 510 mm; upper tank in the upper bottom leaking; Ready for collection from around the end of July Volumetric volume (L): 80.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,20 Bar Min. pressure…
Article type: second-hand storage tank Additional information: The wheels, manhole flange and closures for the manhole are missing, a new lid with closures = €1900; Special flange on the outlet, we can adjust this to a connection of your choice, this costs €474. We can modify the tank for you, contact us without obligation for your quote. Volumetric volume (L):…
Article type: second-hand storage tank Additional information: The casters and some of the closures for the manway are missing. Special flange on the outlet, we can adjust this to a connection of your choice, this costs €474. We can modify the tank for you, contact us without obligation for your quote. Volumetric volume (L): 300 L Ra inner weld: 0,80…
Article type: second-hand storage tank Additional information: Some of the closures for the manway are missing. Special flange on the outlet, we can adjust this to a connection of your choice, this costs €474. We can modify the tank for you, contact us without obligation for your quote. Volumetric volume (L): 300 L Ra inner weld: 0,80 Pressure in tank:…
Additional information: Pharmacy; Half-coil around approx. 900 mm of the cylinder height; bump at the insulation jacket Volumetric volume (L): 4.500 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Brewery Volumetric volume (L): 2.300 L Pressure in tank: pressure Max. pressure (Bar): 2,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of manway: cylinder…
Additional information: Herbal pharmacy; Durchmesser Mannloch 510 mm; some residues of previous content; manhole cover is missing Volumetric volume (L): 8.300 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1,96 Bar Min. pressure (Bar): 0,83 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Solvents; Manufacturer's description available; No bottom outlet Volumetric volume (L): 204 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no Documents included: no Technical drawing included: no Registration plate on…
Additional information: Brewery; Manhole appr. 305 x 440 mm Volumetric volume (L): 570 L Pressure in tank: pressure Max. pressure (Bar): 1,50 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the cylinder: half pipe welded onto the outside of the…
