Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
Additional information: Pharmacy; Frame, Aisi 304; Manhole diameter approx. 505 mm; 1 small part of the containers is slightly higher with a total height of approx. 1,720 mm; smaller dents in the lower bottom; Outlets slightly pressed into the lower bottom; 1 frame strut is bent in 1 container; traces of usage Volumetric volume (L): 1.000 L Pressure in tank:…
Additional information: Beer tanks; 1 hand hole approx. 190 x 240 mm in the front bottom (hand hole cover made of plastic); 2 loose foot frames, Aisi 304 (2 different versions of the foot frames, as the previous operator's tanks were stored on top of each other); total height depending on the design of the foot frame approx. 1,000 -…
Additional information: Cosmetics; Frame, Fe (galvanized); Diameter manhole approx. 415 mm; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Pharmacy; 1 screw connection of the manhole cover damaged Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 97 L Max Overpressure: 2…
Additional information: Manhole diameter 420 mm; 2 longitudinal sight glasses in the cylinder; outlet fitting (disk tap) incomplete Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Food; Frame, Fe (galvanized); slight differences in design (e.g. minor dimensional deviations); 2 containers with frame made of stainless steel 304 (one of them with minor dents in the insulating jacket; see photos); output presumably 1 kW at an operating temperature of approx. 60°C - 80°C (according to test report of a similar container); some residues of previous…
Additional information: Fragrances and dyes for the beverage industry; Frame, Fe (galvanized; partially bent and with signs of corrosion); slight differences in design possible; type plates may be missing in some cases; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no…
Article type: second-hand transport tank Additional information: the tanks have light dents and signs of use; here and there a screw is missing for the manhole; 1 tank is missing a butterfly valve; not all tanks still have a nameplate; please look carefully at the photos; the tanks come from cosmetics Volumetric volume (L): 1.000 L Pressure in tank: pressure…
Additional information: Cosmetics; Manhole approx. 305 x 440 mm Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: DN25 DIN 11851 Agitator: yes Number of…
Additional information: Cosmetics; Frame, Fe (galvanized); minor dents in the upper bottom; clamping ring of the manhole cover missing; disc tap very stiff (possibly defective); bump at the cylinder; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Food; DN 100 hand hole in the upper bottom (in some cases the union nut is missing); small dents possible in some places Volumetric volume (L): 1.000 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: Alcohols and/or test fuels; Frame, Fe (galvanized; partly slightly bent); slight differences in design possible; Ball valve made of brass (nickel-plated); Diameter manhole approx. 420 mm (for 1 container the manhole is slightly pressed into the upper bottom; see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
