Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
Additional information: Beverage industry; Diameter manhole appr. 380 mm; some residues of previous content Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no…
Additional information: Chemistry; Support ring made of Aisi 304; 1 tank with 2 smaller dents in the lower bottom; in the case of one tank, the outlet is pressed slightly into the lower bottom; 1 tank with flange-mounted outlet fitting (if used, the total height would increase by approx. 320 mm); some residues of previous content Volumetric volume (L): 1.200…
Additional information: Cosmetics; 4-legged frame made of stainless steel 304; cone height approx. 650 mm; manhole diameter approx. 410 mm (fastening screws partially incomplete); 7 containers with stacking ring in the upper bottom; hand lever of the disk taps partially slightly bent or incomplete); containers partially with stronger dents; traces of usage Volumetric volume (L): 1.200 L Pressure in tank:…
Additional information: Pharmacy; Frame, Aisi 304; Manhole approx. 300 x 440 mm; 1 tank with 1 dent in the cylinder (see photos) Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: 3-legged frame made of Fe (lacquered); support ring of the cover made of Fe; 1 circular opening in the lid (see photos); some residues of previous content Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Cip tanks in the pharmaceutical industry; Slight differences in the design of the two tanks; dents in the insulation jacket of the lower bottom; 1 tank also has 1 dent in the insulation jacket in the cylinder area (this tank also lacks the spray head); some residues of previous content Volumetric volume (L): 1.250 L Pressure in tank:…
Additional information: Brewery; According to information from the previous operator, the tanks were last used as fermentation tanks in a brewery with an operating pressure of +2 bar. According to the drawing, the tanks were tested with a test pressure of +4 bar. However, a TÜV test was not carried out; Diameter manhole 350 mm; 1 tank is missing 1…
Additional information: Spirits; Manhole approx. 340 x 435 mm; height-adjustable screws of the feet are missing; Dents in the upper bottom floor and transition cylinder/upper bottom (overpressure) Volumetric volume (L): 1.300 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: spirits; tank with internal fixtures and slight metallic discolourations Volumetric volume (L): 1.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator:…
Additional information: Spirits; Manhole appr. 300 x 440 mm; Level indicator incomplete; Butterfly valve screwed to the outlet (for 1 tank DN 50, for the other tank DN 40); 1 lifting eye in the upper bottom; some residues of previous content; scratches inside Volumetric volume (L): 1.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304…
Article type: second-hand storage tank Volumetric volume (L): 1.460 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand transport tank Volumetric volume (L): 1.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Shape of tank: oval Bottom type: dished Total discharge: yes Fixation points: supports for platform Insulation material: Rockwool Outer jacket (ornamental wall): polyester Manway(s): RVS…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
