Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
Additional information: wine storage; Slight differences in design possible (e.g. partly 3 feet, partly 4 feet); manhole approx. 340 x 440 mm Volumetric volume (L): 11.000 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange…
Additional information: Pharmacy; Manhole diameter approx. 510 mm; outlet slightly damaged Volumetric volume (L): 11.030 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): 0,30 Bar Max. temperature (°C): 80 °C Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on…
Additional information: Ethanol; Manufactured according to DIN 6618; manhole diameter 600 mm; 2 pipes each inside the tanks; some residues of previous content Volumetric volume (L): 11.100 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on…
Additional information: Solvents; Built according to DIN6618; pipelines inside the tanks; stand frame, 1.4301 (Aisi 304); manhole cover, 1.4541 (Aisi 304); Outlet with screwed reduction Volumetric volume (L): 11.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,30 Bar Min. pressure (Bar): 0,10 Bar Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: Wine storage; 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; 1 side wall slightly pushed inwards Volumetric volume (L): 11.320 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger:…
Additional information: Dairy; Double jacket with trickle ring - only suitable for pressureless cooling; bumps in the double jacket; Double jacket cladding in the area of the upper bottom partially detached (see photos); some residues of previous content; pipe end cut flush Volumetric volume (L): 11.424 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure…
Additional information: Ethanol; some residues of previous content Volumetric volume (L): 11.500 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: DN65 DIN 11851 Cylinder: 2,50 mm Bottom: 2,80…
Additional information: food industry Volumetric volume (L): 11.630 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: flange DN65 Internal diameter tank: 2.000 mm…
Additional information: Pharmacy; Manhole diameter approx. 600 mm (1 opening diameter 165 mm in manhole cover); 2 bearing saddles made of Fe (painted); outlet with flanged fitting; some residues of previous content; manhole cover plated Volumetric volume (L): 11.650 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 2 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 200…
Additional information: Winery; With 1 tank, the cylinder is marbled on the outside Volumetric volume (L): 11.800 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: flange DN100 Internal…
Additional information: rennet-production; smaller dents in the cylinder; small rectangular sheets were welded in by the previous operator in several places of the cylinder; some residues of previous content Volumetric volume (L): 12.000 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no…
Additional information: Sorbitol tank in the food industry; 1 partition (with openings) in the middle of the tank divides the cylinder length of 5000 mm into 2 x 2,500 mm; lower area in the inner tank straight instead of round due to the design; both tank chambers with a manhole diameter 450 mm; 1 chamber with an outlet DN 65…
Article type: second-hand storage tank Additional information: The agitator drive is missing Volumetric volume (L): 12.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: conical Shape of tank: cylindrical Bottom type: conical Total discharge: yes Fixation points: 4 non adjustable…
Additional information: Cosmetics; on request - up to 11 pieces available Volumetric volume (L): 12.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 50 °C Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank:…
Article type: second-hand mixing tank Additional information: milk tanks; we can’t give any guarantees about the agitator Volumetric volume (L): 12.000 L Ra inner weld: 0,80 Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: conical Shape of tank: cylindrical Bottom type:…
Additional information: cip-tank in a spirits factory Volumetric volume (L): 12.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: flange DN50 Internal diameter…
Additional information: Wine storage; 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom Volumetric volume (L): 12.220 L Pressure in tank: ATM - atmosferic Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank:…
Additional information: Wine storage; 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in foot length (take into account during installation) Volumetric volume (L): 12.280 L Pressure in tank: ATM - atmosferic Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Documents included:…
Additional information: Distillery; Manhole approx. 325 x 420 mm; Cylinder with strong and smaller dents (see photos); The cylinder could be bulged by us upon request and after consultation for an additional charge; According to the manufacturer's instructions, you could purchase the missing manhole cover from Ziemann; some residues of previous content; manhole cover is missing Volumetric volume (L): 12.440…
Additional information: Wine storage; Heating / cooling jacket (Thermoplate) by approx. 1,220 mm of the cylinder height; Manhole approx. 325 x 425 mm; 1 handhole diameter 200 mm in the upper bottom; Outlet DN 100 DIN 11851, screwed on a taper with butterfly valve DN 50 DIN 11851 (see photos); If you are looking for another tank that is identical…
Additional information: textile industry; Flanges (not in contact with the product) partly made of mild steel; manhole diameter 600 mm; manhole cover plated Volumetric volume (L): 12.500 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Storage tank for resins; some residues of previous content; manhole cover is missing Volumetric volume (L): 12.600 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: flange…
item available on order Article type: brand new storage tank - type K3-H12W.L Volumetric volume (L): 12.600 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: single jacketed with…
item available on order Article type: brand new storage tank - type K5-SL Additional information: inner surface 0.8µ Volumetric volume (L): 12.600 L Max. density P (kg/m³): 1.200 Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 316L (V4A) Model:…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
