Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
Additional information: Fragrance production (alcoholic scents); 2 loose, height-adjustable bearing shells, Aisi 304; 1 manhole approx. 345 x 440 mm in the front bottom; partially 1 lifting eyelet on top of the tank; Inner length: approx. 1,340 mm; Inner width: approx. 720 mm; Inner height: approx. 1,470 mm; Indication of total height as in the photo (without taking into account…
Additional information: Pharmacy; Tank was rebuilt in 2011; further technical documents available Volumetric volume (L): 1.229 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 88 L Max Overpressure: 3 Bar…
Additional information: pharmacy; Pneumatic butterfly valve; welded pipeline inside the tank (see photos); cone height approx. 530 mm; minor differences in the design of the tanks possible Volumetric volume (L): 1.235 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: Cip tanks in the pharmaceutical industry; Slight differences in the design of the two tanks; dents in the insulation jacket of the lower bottom; 1 tank also has 1 dent in the insulation jacket in the cylinder area (this tank also lacks the spray head); some residues of previous content Volumetric volume (L): 1.250 L Pressure in tank:…
Additional information: Cosmetics; Frame, Fe (galvanized; slightly bent in some areas); 1 container with DN 80 DIN 11851 outlet; manhole cover screw connections incomplete; container with dents; traces of usage Volumetric volume (L): 1.250 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: Chemistry; Frame, Fe (galvanized); outlet 2"; small dents possible; certificates of inspection mostly available (for 5 the of the containers is stated in the certificates of inspection as material AISI 304; however, the nameplate says AISI 316 and subsequent measurements also showed AISI 316); some residues of previous content; traces of usage Volumetric volume (L): 1.251 L Pressure…
Additional information: Chemistry; Frame, Fe (galvanized); hand hole diameter approx. 210 mm; 1 agitator flange and 1 cut-off connection in the manhole cover; Ball valve very stiff (possibly defective); some residues of previous content; traces of usage Volumetric volume (L): 1.255 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: Food utilization; 2 bearing shells, Fe; Test pressure (water): 1 bar; 3 openings diameter tube inside approx. 315 mm in the bottoms (1x with plated cover); 1 baffle plate inside the tank (see photos); some residues of previous content Volumetric volume (L): 1.260 L Pressure in tank: vacuum Min. pressure (Bar): 1 Bar Max. temperature (°C): 110 °C…
Additional information: Dairy; Possibly also double jacket or former double jacket around the lower bottom; lower bottom of the inner tank with smaller dents Volumetric volume (L): 1.270 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 20 L Max Overpressure:…
Additional information: Druckgeräterichtlinie 97/23/EG Anhang III Modul H/H1 Werkstoffatteste 3.1 B Durchstrahlungsprüfung der Schweissnähte (2%) Volumetric volume (L): 1.280 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 130 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 3 Bar Max. working temperature: 95 °C Documents included:…
Additional information: Brewery; According to information from the previous operator, the tanks were last used as fermentation tanks in a brewery with an operating pressure of +2 bar. According to the drawing, the tanks were tested with a test pressure of +4 bar. However, a TÜV test was not carried out; Diameter manhole 350 mm; 1 tank is missing 1…
Additional information: Pharmaceutical Chemistry; With 1 vessel the agitator is missing; 1 tank with insulation; 2 claws made of V2A (contact surface the other way around; flanges partly made of Fe (see photos); some residues of previous content Volumetric volume (L): 1.300 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max.…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
