Additional information: Pharmaceutical chemistry; Material 1.4462 (duplex steel); 1 manhole DN 600 in the cylinder, 2 manholes DN 600 in the upper bottom (in these two manhole covers there are level indicators and pipes); vessel inside with corrosion; sheet metal cut-outs and minor dents in the riveted insulating jacket (hardly avoidable due to dismantling and transport); bump at the insulation…
Additional information: Pharmaceutical chemistry; Wall thickness of the lower bottom of the upper tank 11 mm Volumetric volume (L): 27.300 L Pressure in tank: vacuum Min. pressure (Bar): 0,60 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no…
Additional information: Feed industry; Manhole appr. 325 x 440 mm; smaller dents in the cylinder Volumetric volume (L): 13.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 50 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no…
Additional information: Pharmacy; Mobile Frame, AISI 304 (the control cabinet boxes shown in the photos are empty); smaller dents inside the tanks; Upper bottoms, Aisi 304 (hangings and fastening screws of the upper bottoms are missing); pipe end cut flush; Metallic discolouration inside Volumetric volume (L): 313 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C):…
Additional information: Biomass; Cone height appr. 400 mm; 3-legged frame, Aisi 304; 3 short pipes inside the tank Volumetric volume (L): 400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Pharmacy; Frame made of AISI304/316; Manhole diameter approx. 455 mm (Manhole cover and clamping ring only available for 1 container); 1 opening at the cone end, diameter approx. 600 mm (closures no longer available); 1 container with side connections (see photos) Volumetric volume (L): 1.900 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316…
Additional information: Spirits; 5 loose plug-in feet made of Fe; manhole approx. 320 x 420 mm; stronger adhesions inside the tanks; 1 tank with dents in the upper bottom; the hand lever of the butterfly valve is missing on 1 tank Volumetric volume (L): 9.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model:…
Additional information: Pharmacy; Slight differences in the design of the vessels; differences in the connections in the manhole cover; overall height slightly lower in some cases (depending on the connections in the manhole cover) Volumetric volume (L): 500 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat…
Additional information: Smaller dents in the insulation jacket; 2 hand holes with a diameter of approx. 175 mm each and 1 elongated sheet metal cutout in the lid (see photos); some residues of previous content Volumetric volume (L): 850 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no…
Additional information: Brewery; According to information from the previous operator, the tanks were last used as fermentation tanks in a brewery with an operating pressure of +2 bar. According to the drawing, the tanks were tested with a test pressure of +4 bar. However, a TÜV test was not carried out; Diameter manhole 350 mm; 1 tank is missing 1…
Additional information: Dairy; 1 manhole diamter 500 mm in the front bottom Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for…
Additional information: Tank hanging on 3 "feet" in frame or ceiling; Hand hole diameter approx. 300 mm; Outlet fitting is missing; some residues of previous content Volumetric volume (L): 324 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 134 °C Material wet parts: SS AISI 316 (V4A) Model:…
