Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
Additional information: Brewery; Tanks loose - frame no longer present; 1 manhole diameter approx. 400 mm in the front bottom (manhole cover fastening screws damaged) Volumetric volume (L): 1.050 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: Manhole diameter: approx. 420 x 320 mm Volumetric volume (L): 1.050 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Max Overpressure: 6 Bar Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Adhesive industry; Frame, Fe (lacquered); 1 longitudinal sight glass; ball valve glued; ; some residues of previous content; traces of usage Volumetric volume (L): 1.050 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Fragrances and dyes for the beverage industry; Container bolted to a drive-under frame made of Fe (galvanized); butterfly valve very stiff (possibly defective); stacking support at the top partially slightly bent; container with small dents; traces of usage Volumetric volume (L): 1.050 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Outlet DN 60 DIN 11851; reinforcement ribs inside under the upper bottom (removable); 2 fork pockets on the outside of the lower bottom Volumetric volume (L): 1.050 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 180 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile…
Additional information: paint (chemistry); outlet DN80 with flanged EBRO-valve and screwed male tanker coupling; container built according to DIN6601 for flammable liquids; frame, Aisi 304; partially smaller dents; for 1 container manhole cover made of Fe; some residues of previous content; traces of usage Volumetric volume (L): 1.070 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI…
Additional information: Food additives; Frame, Fe (galvanised; frames partially slightly bent and with slight signs of corrosion, especially in the outlet area); Thermoplate, Aisi 304 for heating/cooling around the lower bottom and over half the cylinder height; small dents in the bottom of the inner container (overpressure heating jacket); smaller dents in the insulating jacket (at least 1 container with…
Additional information: Biochemistry; Welded stainless steel ring around the outside of the vessel (protrudes approx. 100 mm from the outer diameter (insulation)); some residues of previous content Volumetric volume (L): 1.085 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Article type: second-hand transport tank Additional information: Previous product was Methyl Acrylate (Cas. No. 96-33-3), the tanks are empty and cleaned; the tanks have not been used much and are in very good condition; UN marking. Volumetric volume (L): 1.100 L Pressure in tank: pressure Max. pressure (Bar): 0,30 Bar Min. pressure (Bar): 0,05 Bar Material wet parts: SS AISI…
Additional information: Wine storage; 1 manhole approx. 300 x 390 mm in the front bottom; basic dimensions inside approx. 1,210 x 830 mm; internal height approx. 1,120 mm; container feet partially slightly bent; the tank with our order number 9671 can be stacked on this tank; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves and…
Additional information: Cosmetics; Frame, Fe (galvanized); upper bottoms of the containers slightly dented (see photos); screw connections of the manhole covers mostly missing; traces of usage Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: Pharmacy; Clamp screws on the upper bottom are partially missing; some residues of previous content Volumetric volume (L): 1.100 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 143 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
