Volym i liter Volym i literAnvänd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
Additional information: Cosmetics; 4-legged frame made of stainless steel 304; cone height approx. 650 mm; manhole diameter approx. 410 mm (fastening screws partially incomplete); 7 containers with stacking ring in the upper bottom; hand lever of the disk taps partially slightly bent or incomplete); containers partially with stronger dents; traces of usage Volumetric volume (L): 1.200 L Pressure in tank:…
Additional information: Brewery; Manhole approx. 320 x 350 mm Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: 34 Internal diameter tank: 1.100…
Additional information: Spirits; Manhole appr. 320 x 425 mm (Fastening of the manhole cover incomplete) Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: DN25…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (screwed on to enlarge the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; 1 former connection was welded shut on top of the tank by the…
Additional information: Cosmetics; Tank 1: smaller dents in the lower bottom, manhole diameter approx. 430 mm (loose manhole cover), total height lower (approx. 1,450 mm); Tank 2: manhole diameter approx. 500 mm; tank with stronger dents; see photos Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Beverage industry; Diameter manhole appr. 380 mm; some residues of previous content Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: DN40 DIN…
Additional information: Food Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of tank: flange DN65 Agitator: yes Internal diameter tank: 1.000…
Additional information: Pharmacy; Manhole DN 500; Parts of the blanking plugs may be present Volumetric volume (L): 1.200 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 135 °C Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no…
Additional information: Fragrance production (alcoholic scents); 2 loose, height-adjustable bearing shells, Aisi 304; 1 manhole approx. 345 x 440 mm in the front bottom; partially 1 lifting eyelet on top of the tank; Inner length: approx. 1,340 mm; Inner width: approx. 720 mm; Inner height: approx. 1,470 mm; Indication of total height as in the photo (without taking into account…
Additional information: Pharmacy; Tank was rebuilt in 2011; further technical documents available Volumetric volume (L): 1.229 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 150 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 88 L Max Overpressure: 3 Bar…
Additional information: pharmacy; Pneumatic butterfly valve; welded pipeline inside the tank (see photos); cone height approx. 530 mm; minor differences in the design of the tanks possible Volumetric volume (L): 1.235 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,50 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 100 °C Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: Cip tanks in the pharmaceutical industry; Slight differences in the design of the two tanks; dents in the insulation jacket of the lower bottom; 1 tank also has 1 dent in the insulation jacket in the cylinder area (this tank also lacks the spray head); some residues of previous content Volumetric volume (L): 1.250 L Pressure in tank:…
Additional information: Cosmetics; Frame, Fe (galvanized; slightly bent in some areas); 1 container with DN 80 DIN 11851 outlet; manhole cover screw connections incomplete; container with dents; traces of usage Volumetric volume (L): 1.250 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: Chemistry; Frame, Fe (galvanized); outlet 2"; small dents possible; certificates of inspection mostly available (for 5 the of the containers is stated in the certificates of inspection as material AISI 304; however, the nameplate says AISI 316 and subsequent measurements also showed AISI 316); some residues of previous content; traces of usage Volumetric volume (L): 1.251 L Pressure…
Additional information: Chemistry; Frame, Fe (galvanized); hand hole diameter approx. 210 mm; 1 agitator flange and 1 cut-off connection in the manhole cover; Ball valve very stiff (possibly defective); some residues of previous content; traces of usage Volumetric volume (L): 1.255 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: Dairy; Possibly also double jacket or former double jacket around the lower bottom; lower bottom of the inner tank with smaller dents Volumetric volume (L): 1.270 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 20 L Max Overpressure:…
Additional information: Druckgeräterichtlinie 97/23/EG Anhang III Modul H/H1 Werkstoffatteste 3.1 B Durchstrahlungsprüfung der Schweissnähte (2%) Volumetric volume (L): 1.280 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Max. temperature (°C): 130 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 3 Bar Max. working temperature: 95 °C Documents included:…
Additional information: Brewery; According to information from the previous operator, the tanks were last used as fermentation tanks in a brewery with an operating pressure of +2 bar. According to the drawing, the tanks were tested with a test pressure of +4 bar. However, a TÜV test was not carried out; Diameter manhole 350 mm; 1 tank is missing 1…
Additional information: Pharmaceutical Chemistry; With 1 vessel the agitator is missing; 1 tank with insulation; 2 claws made of V2A (contact surface the other way around; flanges partly made of Fe (see photos); some residues of previous content Volumetric volume (L): 1.300 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3,20 Bar Min. pressure (Bar): 1 Bar Max.…
Additional information: Pharmaceutical chemistry; 2 support brackets made of Aisi 304 (contact surface the other way around; see photos); flanges partly made of Fe; further techn. documents available; In some cases, connections are flanged in the top bottom or at the outlet; using these connections would increase the overall height accordingly; some residues of previous content Volumetric volume (L): 1.300…
item available on order Article type: brand new pressure tank Volumetric volume (L): 1.300 L Pressure in tank: pressure Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Min. temperature (°C): -10 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank:…
Additional information: Pharmacy; Various technical documents available Volumetric volume (L): 1.300 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 3 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 130 °C Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 80 L Max Overpressure: 6 Bar Max onderdruk: 1 Bar Max.…
item available on order Article type: brand new pressure tank - type CCT-ES-HL Volumetric volume (L): 1.300 L Finish stainless steel: pickled Pressure in tank: pressure Max. pressure (Bar): 2 Bar Min. pressure (Bar): -0,15 Bar Max. temperature (°C): 130 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no…
item available on order Article type: brand new fermentation tank - type CCT-HL Additional information: Included in the price: cip spraybol, thermometer, sample valve. In option: butterfly valve, airlock (see options). Volumetric volume (L): 1.300 L Max. density P (kg/m³): 1.050 Ra inner weld: 0,80 Finish stainless steel: 2b Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature…
Volym i liter
Använd draglisten för det volymspann ni önskar se. Klicka sen i t.ex. (material, omrörare, isolering etc.) för att slutligen klicka på FILTRERA, då visas endast de tankar som finns inom de krav ni angett.
