Additional information: Protective varnish; Frame, Fe (galvanized); diameter of manhole approx. 390 mm; ball of the ball valve made of plastic (probably Teflon); some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Fixing varnish; Frame, Fe (galvanized); diameter of manhole approx. 415 mm (container with screwed screw holder made of Fe (galvanized) around the manhole collar); fastening screws of the manhole cover incomplete; dents in the lower bottom (see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316…
Additional information: Cosmetics; Frame, Fe (galvanized); diameter of manhole approx. 415 mm ( the fastening screws of the manhole cover are made of Fe (galvanized; with signs of corrosion); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Fixing varnish; Frame, Fe (galvanized); diameter of manhole approx. 415 mm (for 2 containers, the fastening screws of the manhole cover are made of Fe (galvanized; with signs of corrosion); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no…
Additional information: Chemistry; Total height estimated according to drawing (deviations possible); manhole cylinder NW 600; test pressure according to drawing: 1 bar Volumetric volume (L): 67.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Wine storage; 1 manhole approx. 300 x 390 mm in the front bottom; basic dimensions inside approx. 1,210 x 830 mm; internal height approx. 1,120 mm; container feet partially slightly bent; the tank with our order number 9671 can be stacked on this tank; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves and…
Additional information: Wine storage; 1 manhole approx. 300 x 390 mm in the front bottom; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851 Volumetric volume (L): 350 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: Wine storage; 1 manhole approx. 300 x 400 mm in the front bottom; 1 screwed outlet fitting with butterfly valve enlarges the outlet to DN 50 DIN 11851; cutting residues from 2 cut-off stainless steel parts on the outside of the cylinder (see photos) Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Material wet parts:…
Additional information: Food industry; Tanks are slightly out of round due to their design; tanks with small (sometimes slightly larger) dents; some of the tank feet are pressed into the lower bottom; tank lids are made of plastic (2 containers are missing lids; one lid has holes in the lid; see photos) Volumetric volume (L): 1.000 L Pressure in tank:…
Additional information: Rinse water tank (Cip system) in a dairy; Cone height approx. 1000 mm; manhole approx. 430 mm (slightly unround); dents in the upper bottom; insulation jacket cut open at the end of the cone bottom (see photos); some residues of previous content; bump at the insulation jacket; pipe end cut flush Volumetric volume (L): 2.000 L Pressure in…
Additional information: Fruit juice industry; Frame, Aisi 304; Container with dents, especially in the lower bottom; stack struts partially bent; 1 DN 40 connection in the container wall (see photos); traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: Brewery; Probably 1 spray ball inside each tank Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no…
Article type: second-hand pressure tank Additional information: Full vacuum -1 bar; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 1.500 L Pressure in tank: pressure Max. pressure (Bar): 0,49 Bar Min. pressure (Bar): -1 Bar Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no…
Additional information: plant extracts; Diameter manhole upper bottom approx. 410 mm; slight metallic discoloration inside the tanks; some residues of previous content Volumetric volume (L): 6.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Egg products; Dents possible; Frame Fe (galvanized; partly bent); Nameplate partially present; outlet sizes could partly differ; butterfly valves may partially no longer be functional; traces of usage Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: textile industry; 1 pipeline for cleaning in the upper cylinder area; screw-nuts of the cover screws welded; agitator was removed meanwhile and is enclosed loose; some residues of previous content Volumetric volume (L): 20.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: Dairy; Insulation around the upper bottom and cylinder, not the lower bottom; spray ball connection slightly bent and weld seam in the upper bottom torn (see pictures); outlet diameter pipe inside approx. 50 mm spreads to approx. 65 mm towards its cut end Volumetric volume (L): 14.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS…
Additional information: ylinder flanged; 1 filter insert and hoses inside the tank (see photos); 1 lifting eye in the upper bottom; some residues of previous content Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Additional information: 4 support brackets, Fe; cone height appr. 1400 mm; 2 open connections in the cylinder (see photos); some residues of previous content Volumetric volume (L): 15.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no…
Additional information: chemical industry Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Type HE on the bottom: heating/cooling jacket Type HE on the cylinder: heating/cooling jacket Documents included: no Technical drawing included:…
Additional information: textile factory; mehrere Rohrleitungen innen; some residues of previous content; pipe end cut flush Volumetric volume (L): 15.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Food industry; Parts of the cylinder are marbled on the outside; some residues of previous content Volumetric volume (L): 5.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Dairy; Diameter manhole approx. 420 mm; Insulation around the cylinder (small dents in the insulation jacket) Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 90 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical…
Article type: second-hand pressure tank Additional information: PED file on demand; the tank has never been used Volumetric volume (L): 5.000 L Max. density P (kg/m³): 1.800 Pressure in tank: pressure Max. pressure (Bar): 6 Bar Min. pressure (Bar): -1 Bar Max. temperature (°C): 150 °C Material wet parts: SS AISI 316L (V4A) Model: vertical Configuration: insulated Heat exchanger: no…
Additional information: Winery; Manhole approx. 320 x 420 mm; Tanks marbled on one side on the outside; the foot lengths on the individual tanks are slightly different (usually 1 foot is shorter than the other two feet; the feet would have to be modified or relined accordingly before re-installation); 1 tank with a smaller dent in the upper cylinder area…
Volumetric volume (L): 1.150 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Top type: open Total discharge: yes Volume: 4 L Max Overpressure: 5 Bar Max. working temperature: 80 °C Fixation point(s): plastic Documents…
Additional information: Wine storage; 1 manhole approx. 325 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves (screwed on to reduce the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; walls curved outwards; small dents in the front bottom possible;…
Additional information: Brewery; Loose lid with hinged segment; some residues of previous content Volumetric volume (L): 2.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the cylinder: heating/cooling jacket Documents included: no Technical drawing…
Article type: second-hand storage tank Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 attachment points…
Additional information: Cosmetics; Frame Fe, lacquered (corrosion); hand hole diameter approx. 320 mm; some residues of previous content Volumetric volume (L): 1.050 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: spirits; Manhole cover flange made of Fe; 1 former connection welded shut in the lower bottom of each tank (see pictures) Volumetric volume (L): 3.500 L Pressure in tank: ATM - atmosferic Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Cosmetics; Total height including the control cabinet on a stand (see photos from the previous operator); Metallic discolouration inside Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the…
Additional information: chemistry (plant extracts); Manhole diameter approx. 410 mm; adhesions and slight metallic discolouration inside the tanks Volumetric volume (L): 6.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Spirits; Manhole approx. 340 x 435 mm; height-adjustable screws of the feet are missing; Dents in the upper bottom floor and transition cylinder/upper bottom (overpressure) Volumetric volume (L): 1.300 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: chemistry Volumetric volume (L): 2.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position of manway: cylinder Outlet of tank:…
Article type: second-hand storage tank Additional information: the tanks have never been used Volumetric volume (L): 22.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical Wall type: conical Total discharge: yes Fixation points: 4 non adjustable feet Manway(s):…
Additional information: Winery; Manhole approx. 320 x 420 mm; Tanks marbled on one side on the outside; the foot lengths on the individual tanks are slightly different (usually 1 foot is shorter than the other two feet; the feet would have to be modified or relined accordingly before re-installation); 1 tank with a stronger dent in the upper cylinder area…
Additional information: Slurry; Type plate no longer available; further technical documents available; Diameter manhole cylinder 600 mm; a taper DN 50 is flanged to the outlet; 1 additional container of the same design is available on request Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 316 (V4A)…
Additional information: Water tank in agriculture; 2 chamber tank (1 x approx. 2000 liters, 1 x approx. 1000 liters); interior height approx. 1000 mm; Opening chamber 1: approx. 1,260 x 1,330 mm, opening chamber 2: approx. 1,260 x 750 mm; Walls slightly curved outwards Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI…
Additional information: Plant based pharmacy; Manhole diameter: approx 395mm; partially defective disc valves; partial dents on some containers; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical…
Additional information: Food industry; 1 dent in the inner tank (overpressure of the no longer functional heating jacket; see photos); insulation jacket with smaller dents and partially detached plates; tank with adhesions inside; Devices for load cells under the feet (3 loose load cells are included in the scope of delivery; these were not taken into account when specifying the…
Additional information: Ice-cream produktion; support brackets made of Aisi 304; diameter manhole 420 mm Volumetric volume (L): 1.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no…
Additional information: Wine storage; 1 manhole approx. 340 x 440 mm in the front bottom; tanks were professionally cleaned by a specialist company in 2024; walls curved outwards; Tanks with dents (see photos) Volumetric volume (L): 5.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (screwed on to enlarge the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; tank feet are partially slightly bent; 1 tank with several dents Volumetric volume…
Article type: second-hand mixing tank Additional information: we can place feet on the tanks --> feel free to inform yourself for price and possibility; we can’t give any guarantees about the agitator Volumetric volume (L): 1.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile…
Additional information: ethanol; bearer frame made of Fe; insulation jacket with dents and extensively nonexistent; manhole appr. 300 x 400 mm in one of the bottoms; some residues of previous content; manhole cover is missing Volumetric volume (L): 4.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: insulated Heat exchanger: no…
Additional information: Mustard production; Manhole diameter approx. 410 mm; Frame, Fe (galvanized; struts partly slightly bent); Product adherence inside; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Beverage industry; Agitator, Aisi 304 (1.4541); Feet with pedestal and screws made of Fe Volumetric volume (L): 700 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: transport tank for viscous gels; Tanks are equipped with a pump (see pictures) Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange…
Additional information: Food industry; Container with small dents; some residues of previous content; traces of usage Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Volumetric volume (L): 1.169 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 2,50 Bar Max. working temperature: 140 °C Documents included: no Technical drawing included: no Registration plate on the…
Volumetric volume (L): 1.169 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 2,50 Bar Max. working temperature: 140 °C Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; total length and total height according to drawing; Tanks have been professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves, sampling valves and manhole seals were installed Volumetric volume (L): 36.000 L Pressure in tank: ATM - atmosferic Material wet…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the cylinder; total height according to drawin); Tanks have been professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves, sampling valves and manhole seals were installed Volumetric volume (L): 24.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304…
Volumetric volume (L): 650 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 100 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Max Overpressure: 2,50 Bar Max. working temperature: 140 °C Heat exchanger: RVS 304 Documents included: no Technical drawing included: no…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the cylinder; total height according to drawing; lower bottom with slope to the outlet with cup (for installation, an appropriate foundation would have to be built on site); upper bottom and top cylinder segment made of 1.4571 (Aisi 316); Tanks have been professionally cleaned and overhauled by the…
Additional information: Wine storage; 1 manhole approx. 325 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves (screwed on to reduce the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; walls curved outwards; Total height including end of plastic tube…
Additional information: Wine storage; 1 manhole approx. 325 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled by the manufacturer in 2024; brand new residual drain valves (screwed on to reduce the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; walls curved outwards Volumetric volume (L): 6.100 L Pressure in…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; 2 slightly different versions: version 1 with stackable frame in top and a reinforcement rod inside can be used to stack version 2 (without frame) on top; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (screwed on to enlarge the…
Additional information: Wine storage; 1 manhole approx. 320 x 420 mm in the front bottom; tanks were professionally cleaned and overhauled in 2024; brand new residual drain valves (screwed on to enlarge the outlet to DN 50 DIN 11851 (with butterfly valve)) and manhole seals were installed; 1 former connection was welded shut on top of the tank by the…
Article type: second-hand storage tank Additional information: There is still a bit of salt in the tank. Please look at the pictures. Volumetric volume (L): 38.000 L Pressure in tank: ATM - atmosferic Material wet parts: polyester (fiberglass) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: strong…
Article type: second-hand pressure tank Additional information: we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 230 L Pressure in tank: pressure Material wet parts: SS AISI 304L (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: strong conical Bottom outlet: yes…
Article type: second-hand storage tank Additional information: The covering around the insulation has come loose at the front, please look carefully at the photos.; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 20.000 L Pressure in tank: pressure Design pressure (Bar): 4,50 Bar Max. pressure (Bar): 3,50 Bar Material wet parts: SS AISI 304 (V2A) Model:…
Additional information: colours & coatings; Manhole diameter: approx. 395 mm; ; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: Spirits; Slight metallic discoloration inside the tank Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Position…
Additional information: Lebensmittel; Behälterauslauf ragt über Behälterfüße hinaus, Behälter müsste zur Aufstellung entsprechend unterfüttert werden; 1 loses Fußgestell aus Normalstahl gehört zum Lieferumfang; Gesamthöhe inkl. Fußgestell Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total…
Additional information: Brewery; 1 manhole approx. 300 x 395 mm in the front bottom; 3 loose bearing shells, Fe; 1 dent in the transition cylinder/front bottom (see photos) Volumetric volume (L): 13.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: N-Heptane; Manhole diameter approx. 410 mm; side walls in "trapezoidal sheet design" (basic external dimensions approx. 1200 x 900 mm); internal height approx. 2,000 mm Volumetric volume (L): 2.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: Hand hole diameter: approx. 140mm with sight glass Volumetric volume (L): 500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no…
Article type: second-hand storage tank Volumetric volume (L): 800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: square Bottom type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable feet Fixation point(s): RVS…
Additional information: Heating jacket around approx. 2.380 mm of the lower cylinder height; Manhole approx. 430 x 540 mm; Tanks are currently hanging in a transport frame made of Fe; 1 loose ladder bracket is included in the scope of delivery (would have to be welded on site if desired) Volumetric volume (L): 31.000 L Pressure in tank: ATM -…
Additional information: Yoghurt tank in a dairy; Double chamber tank (2 x 40,000 liters); cylinder height 2 x 4600 mm; Manhole approx. 410 x 510 mm; upper tank in the upper bottom leaking; Ready for collection from around the end of July Volumetric volume (L): 80.000 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 0,20 Bar Min. pressure…
Additional information: Brewery; Manhole approx. 320 x 350 mm Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator:…
Additional information: Cosmetics; Total height estimated (deviations possible); Agitator supports may need to be relined for installation; Diameter outlet end approx. 35 mm; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge:…
Additional information: Vapor water tank (dairy); exact dimensions may vary slightly; riveted insulation is damaged in some places (see pictures); The bottom of the tank is filled with concrete; some residues of previous content Volumetric volume (L): 50.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation:…
Additional information: Winery; With 1 tank, the cylinder is marbled on the outside Volumetric volume (L): 11.800 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange…
Additional information: food (wine); Aluminum frame (a strut on one container is bent; see photos); 2 of the containers with butterfly taps (not quite complete anymore); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Additional information: Brewery; Manhole approx. 345 x 455 mm; 1 dent in the insulation jacket (see photos); some residues of previous content Volumetric volume (L): 2.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on…
Additional information: Beer tank; Height-adjustable screws of the feet incomplete (this would have to be compensated accordingly on site for installation); Not every tank may have a spray ball; some residues of previous content Volumetric volume (L): 900 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation:…
Article type: second-hand storage tank Volumetric volume (L): 1.750 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical Bottom type: dished Total discharge: yes Fixation points: non adjustable feet Fixation point(s): RVS 304 Suitable for food industry: yes Documents…
Additional information: Beer tank; some residues of previous content Volumetric volume (L): 900 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet…
Additional information: Dairy; Minor differences in the design of the two tanks (e.g. location of the outlets); Manhole diameter approx. 510 mm; a former manhole and 1 connection in the lower cylinder area were welded shut by the previous operator; 1 tank with a smaller dent in the insulating jacket; see photos Volumetric volume (L): 8.000 L Pressure in tank:…
Additional information: Tank blasted and primed on the outside; Manhole diameter approx. 510 mm; 5 round connections in the lower bottom; 1 strong dent in the insulation jacket; former connections in the upper bottom cut off (see photos) (see photos) Volumetric volume (L): 4.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Milk; Double jacket with trickle ring - only suitable for pressureless cooling; a rectangular sheet was cut out of the double jacket (this sheet is located inside the tank; see photos); former connections partially cut off or welded shut Volumetric volume (L): 4.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model:…
Additional information: Wine storage; 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; 1 side wall slightly pushed inwards Volumetric volume (L): 11.320 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger:…
Additional information: Wine storage; 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom Volumetric volume (L): 13.650 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes…
Additional information: Wine storage; 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom Volumetric volume (L): 12.220 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Documents included: no…
Additional information: Wine storage; 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom; smaller dents in the upper bottom; feet partially supported with stainless steel plates; tank with a dent in the front bottom (see photos) Volumetric volume (L): 10.460 L Pressure in tank: ATM -…
Additional information: Wine storage; 2 cooling plates inside each tank; 1 manhole approx. 340 x 440 mm in the front bottom; feet partially padded (see photos) Volumetric volume (L): 8.310 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total…
Additional information: Wine storage; 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; stated total height is estimated; foot ends were cut off during dismantling and are included loose (current total height with cut off foot ends approx. 2,650 mm). Volumetric volume (L): 10.468 L Pressure…
Article type: second-hand mixing tank Additional information: The legs of the tank have been cut off and are supplied separately, please look carefully at the photos.; we can’t give any guarantees about the agitator Volumetric volume (L): 7.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation:…
Article type: second-hand mixing tank Additional information: we can’t give any guarantees about the agitator Volumetric volume (L): 6.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical Bottom type: strong conical Total discharge: yes Fixation points: 3 non…
Article type: second-hand mixing tank Additional information: Please look carefully at the photos, In 2 of the 3 tanks there is still some grease on the inner wall .; we can’t give any guarantees about the agitator Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat…
Article type: second-hand storage tank Additional information: the tanks have never been used Volumetric volume (L): 22.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Shape of tank: cylindrical Wall type: conical Total discharge: yes Fixation points: 4 non adjustable feet Manway(s):…
Additional information: Chemistry; Electric heating cables around parts of the tank; Diameter manhole cylinder 600 mm; Insulation with larger cutouts in insulation and insulation jacket; tank is currently provided with a transport lock; 1 pipe inside the tank (see photos); manhole cover plated Volumetric volume (L): 32.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316…
Additional information: Brewery; Height-adjustable screws of the feet are partially missing (they would have to be retrofitted on site for installation, otherwise the outlet would be lower than the feet); Tanks inside partly with metallic discoloration; 2 tanks with dents in the cylinder/upper bottom transition (see photos) Volumetric volume (L): 900 L Pressure in tank: ATM - atmosferic Material wet…
Additional information: Pharmacy; Frame, Aisi 304; Manhole approx. 300 x 440 mm; 1 tank with 1 dent in the cylinder (see photos) Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Powder mixer in the food industry; Manhole diameter approx. 410 mm; Support ring and plate on the outside of the lower bottom made of Fe; Grayish protective coating on the outside Volumetric volume (L): 300 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: fruit juice; Volume consists of 4x 400 liter tanks; frame, height adjustable; Manhole diameter: approx. 390 mm; tanks are connected to each other via a pipe system including a feed pump, pressure compensation tank and electro-pneumatic control controller; 2x tanks with DN50 ball valve as outlet; 2x tanks with DN40 disc valve as outlet; ; some residues of…
Volumetric volume (L): 13 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Total height of tank: 1.700 mm Total outer width: 900 mm Total outer length: 1.550 mm Empty weight tank:…
