Additional information: Chemistry; Manhole cylinder diameter 500 mm (most of the manhole cover screws are missing); 1 tank has 1 foot pressed into the lower bottom and the other tank has 2 feet pressed into the lower bottom; (this tank also has 1 connection pressed into the upper bottom and the heating coil is pressed in at one point; the…
Additional information: Sterile tank in a dairy; Double jacket with trickle ring - only suitable for cooling; 1 former connection welded shut in the upper bottom; connections partially cut off; weld seam of the double jacket has partially come loose in the upper cylinder area (see photos); pipe end cut flush Volumetric volume (L): 9.000 L Pressure in tank: pressure…
Additional information: Beer storage; Tanks lie loosely in frames, made of Aisi 304, which are screwed together in pairs; 1 hand hole each approx. 215 x 240 mm in the front bottom (plastic hand hole cover); 1 pipe inside; 2 tanks outlet inner pipe diameter approx. 44 mm, 1 tank outlet inner pipe diameter approx. 35 mm, for one tank…
Additional information: Brewery; Tanks loose on frames, Aisi 304 (different versions of the frames, some screwed together; see photos); 1 hand hole each approx. 190 x 240 mm in the front bottom (plastic hand hole cover) Volumetric volume (L): 500 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration:…
Additional information: Chemistry; 4-legged frame, Aisi 304; Hand hole diameter approx. 155 mm; some residues of previous content Volumetric volume (L): 225 L Pressure in tank: pressure and vacuum Max. pressure (Bar): 1 Bar Min. pressure (Bar): 1 Bar Max. temperature (°C): 95 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes…
Additional information: Winery; Thermoplate for heating/cooling on one of the two side walls (not on the other side wall); 1 manhole approx. 340 x 440 mm in the front bottom; small dents in the upper bottom; various fittings inside the tank (these have not been taken into account in the specified dimensions); some residues of previous content Volumetric volume (L):…
Additional information: Wine storage; 2 cooling plates each inside the tanks; 1 manhole approx. 300 x 400 mm in the front bottom; feet fitted with loose, height-adjustable screws (possibly no longer available for all feet; screws were not included in the overall height; this would increase accordingly if used); feet are arranged slightly offset Volumetric volume (L): 8.750 L Pressure…
Additional information: Wine storage; 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in foot length (take into account during installation) Volumetric volume (L): 12.280 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Brewery; Tanks loose on frames, Aisi 304 (different versions of the frames, some screwed together; see photos); 1 hand hole each approx. 190 x 240 mm in the front bottom (plastic hand hole cover) Volumetric volume (L): 500 L Pressure in tank: pressure Max. pressure (Bar): 3 Bar Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration:…
Additional information: heating oil; Manhole diameter: approx. 600mm; including optical leak detector, tank fitting for heating oil, limit indicator & ladder with stand; Volumetric volume (L): 100.000 L Pressure in tank: ATM - atmosferic Model: horizontal Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: no Documents included: no Technical drawing included: no Registration…
Additional information: Putty; Frame, Aisi 304; Manhole diameter approx. 410 mm; 1 filling tube inside the container; some residues of previous content; traces of usage Volumetric volume (L): 1.011 L Pressure in tank: pressure Max. pressure (Bar): 0,50 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of…
