Additional information: Brewery; Height-adjustable screws of the feet are partially missing (they would have to be retrofitted on site for installation, otherwise the outlet would be lower than the feet); Tanks inside partly with metallic discoloration; 2 tanks with dents in the cylinder/upper bottom transition (see photos) Volumetric volume (L): 900 L Pressure in tank: ATM - atmosferic Material wet…
Additional information: Pharmacy; Frame, Aisi 304; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position…
Additional information: Storage tank for resins; some residues of previous content; manhole cover is missing Volumetric volume (L): 12.600 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank:…
Additional information: Pharmacy; Frame, Aisi 304; Manhole approx. 300 x 440 mm; 1 tank with 1 dent in the cylinder (see photos) Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Powder mixer in the food industry; Manhole diameter approx. 410 mm; Support ring and plate on the outside of the lower bottom made of Fe; Grayish protective coating on the outside Volumetric volume (L): 300 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no…
Additional information: fruit juice; Volume consists of 4x 400 liter tanks; frame, height adjustable; Manhole diameter: approx. 390 mm; tanks are connected to each other via a pipe system including a feed pump, pressure compensation tank and electro-pneumatic control controller; 2x tanks with DN50 ball valve as outlet; 2x tanks with DN40 disc valve as outlet; ; some residues of…
Additional information: Food industry; Operating pressure in the double jacket: 2.8 bar; 2 former connections in the upper bottom were welded shut by the previous operator Volumetric volume (L): 1.700 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total…
Volumetric volume (L): 13 L Pressure in tank: ATM - atmosferic Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: no Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Total height of tank: 1.700 mm Total outer width: 900 mm Total outer length: 1.550 mm Empty weight tank:…
Additional information: Pharmacy; Frame, Aisi 304; Internal dimensions approx. 1100 x 700 mm; wall height approx. 710 mm; Outlet approx. 100 x 100 mm with plastic components (probably Teflon); outlet design may vary for some containers (see last 3 photos); traces of usage Volumetric volume (L): 590 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304…
Additional information: The horizontally arranged rotor is suspended. For maintenance purposes, the housing door can be fully opened and provides free access to the drum and all process components. With optional frequency converters and customized controls and instruments, the peeler centrifuge can be optimally adapted to a variety of processing requirements to achieve the best possible performance. Volumetric volume (L):…
Article type: second-hand mixing tank Additional information: we can’t give any guarantees about the agitator Volumetric volume (L): 850 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: conical Shape of tank: cylindrical Bottom type: conical Total discharge: yes Fixation points:…
Additional information: Fruit juice; Manhole approx. 310 x 410 mm; small dents in the cylinder; some residues of previous content Volumetric volume (L): 5.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no…
Article type: second-hand storage tank Additional information: Immersion resistance DIRAC 1000W - 120°C - 230/400V; Sight glass with lighting. The tank has never been used. Volumetric volume (L): 500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: yes Insulation: no Mobile tank: no Top type: dished Shape of…
Additional information: Food industry; Outlet with fitting (see photos) Volumetric volume (L): 1.340 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 85 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Food industry; 4 support brackets, Aisi 304; Manhole diameter approx. 420 mm; Insulation around the cylinder only; The previous operator had the two tanks in a stainless steel frame; This frame is still available and can be included upon request for an additional charge (see photos) Volumetric volume (L): 2.210 L Pressure in tank: ATM - atmosferic Max.…
Additional information: fruit juice; manhole diameter: approx. 395 mm; ; some residues of previous content; lime residues Volumetric volume (L): 1.700 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on…
Additional information: fruit juice; 2 loose concrete saddles; 1 manhole approx. 340 x 440 mm in the front bottom; manhole seal missing; Inner length: approx. 2,160 mm; Inner width: approx. 705 mm; Interior height: approx. 1,490 mm; ; some residues of previous content Volumetric volume (L): 2.130 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304…
Additional information: fruit juice; 2 loose concrete saddles; 1 manhole approx. 340 x 440 mm in the front bottom; Inner length: approx. 1,650 mm; Inner width: approx. 705 mm; Interior height: approx. 1,490 mm; the spout is slightly dented; circular hole (Ø= 36 mm) on top of the tank; some residues of previous content Volumetric volume (L): 1.585 L Pressure…
Additional information: Pharmacy/ Food (Fennel); frame, Fe (galvanized); some dents on the containers; partly the clamping rings of the manholes and the outlet valve are made of Fe; Alternatively, the containers are also available from us made of aluminum (#9302); ; some residues of previous content Volumetric volume (L): 1.950 L Pressure in tank: ATM - atmosferic Material wet parts:…
Additional information: Emulsion/coating; Manhole approx. 470 x 400 mm; 1 dent in the cylinder; some residues of previous content Volumetric volume (L): 25.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: Vegetable fat tank in an ice cream factory; Heating coil around about half of the cylinder height and the lower bottom; Insulating jacket around the entire tank (1 tank with smaller dents in the insulating jacket); some residues of previous content; pipe end cut flush Volumetric volume (L): 16.500 L Pressure in tank: ATM - atmosferic Max. temperature…
Additional information: stack water; Manhole diameter: approx. 500mm; ; some residues of previous content Volumetric volume (L): 2.167 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration…
Additional information: cleaning supplies; insulation was added later by the previous owner; insulation slightly torn; ; some residues of previous content Volumetric volume (L): 400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: open Total discharge: yes Documents included: no…
Additional information: aerosol production; smaller dents possible; height-adjustable screws partly bent; on 1 tank, feet slightly pressed into the lower bottom Volumetric volume (L): 6.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included:…
Additional information: pharmacy; frame, Aisi 304; ; traces of usage; small dents Volumetric volume (L): 1.670 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for…
Additional information: Pharmacy; Frame, Aisi 304; traces of usage Volumetric volume (L): 625 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position…
Additional information: manhole in the cylinder diameter 600 mm; Complete manufacturer documentation available; A ladder also available upon request; tank has fixtures for field installation of insulation (this fixture is slightly dented); some residues of previous content Volumetric volume (L): 70.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed…
Article type: second-hand storage tank Volumetric volume (L): 1.460 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand storage tank Volumetric volume (L): 640 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand storage tank Volumetric volume (L): 460 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand storage tank Volumetric volume (L): 1.520 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand storage tank Volumetric volume (L): 750 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand storage tank Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: flat sloping Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable…
Article type: second-hand storage tank Volumetric volume (L): 920 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Shape of tank: cylindrical Bottom type: dished Wall type: flat Bottom outlet: yes Total discharge: yes Fixation points: 4 casters Valve: RVS…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 3 L Max Overpressure: 5 Bar Max. working temperature: 80 °C Fixation point(s): plastic Documents included: no Technical…
Volumetric volume (L): 1.150 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of…
Additional information: Connections to the heating coils around the cylinder and the lower bottom were partially welded shut by the previous operator; we suspect that the heating coils are no longer functional; bump at the insulation jacket Volumetric volume (L): 1.700 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat…
Additional information: Wool fat; Manhole diameter approx. 580 mm; metallic discoloration inside in the area of the upper bottom; Insulation jacket with dents and smaller sheet metal cutouts; some residues of previous content; manhole cover plated Volumetric volume (L): 30.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 70 °C Material wet parts: SS AISI 304 (V2A) Model:…
item available on order Article type: brand new storage tank Additional information: THE TANKS ARE NOT COMPLETELY READY - PROJECT CANCELLATION - FOR THE INDICATED PRICE THEY CAN BE FINISHED IN SHORT TERM --> 5 TANKS ARE COMPLETELY READY. The conical head side is AISI 316L the rest is AISI 304L. Agitator is not included. Several heating/cooling zones can be…
Additional information: Ethanol; some residues of previous content Volumetric volume (L): 11.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Position of…
Additional information: wall length inside: approx. 2150 mm; Manhole diameter: approx. 460 mm; butterfly valve; Knob plate (V2A) in the lower cylinder area; Iso with V2A jacket (partly welded, partly riveted); some slight detached spots & smaller dents in the insulation jacket; External cooling element included with the following approx. dimensions: L= 1220 mm/ W= 1280 mm/ H= 1100 mm…
Additional information: colours & coatings; Manhole diameter: approx. 395 mm; ; some residues of previous content Volumetric volume (L): 300 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the…
Additional information: fragrances & scents; Stainless steel 304 frame; manhole diameter approx. 400 mm; some dents may be present in the containers; different outlet types and sizes (inner tube diameter 24 - 28 mm; see photos); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model:…
Additional information: plasticizer; Frame Fe (galvanized); Frame partly with signs of corrosion; Basic frame dimensions: 1030 x 1230 mm; Manhole diameter approx. 400 mm; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: colours & coatings; Frame made of Fe (lacquered); Manhole diameter approx. 370 mm; Basic frame dimensions: 1210 x 1030 mm; some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes…
Additional information: plasticizer; Lacquered frame Fe (galvanized); Frame partly with signs of corrosion; Basic frame dimensions: 1030 x 1230 mm; Manhole diameter approx. 395 mm (1 container is missing a manhole cover); some residues of previous content Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: open Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of tank: DN50…
Additional information: Food industry; Basic dimensions inside: approx. 1,180 x 1,180 mm; Inner height: approx. 790 mm; Lever of the outlet tap is missing; some residues of previous content Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total…
Additional information: Food industry; Double chamber tank 1800 liters (1 x 1300 liters, 1 x 500 liters); one manhole diameter approx. 415 mm per chamber; 1 outlet per chamber (1 x inner pipe diameter approx. 35 mm, 1 x inner pipe diameter approx. 38 mm); 2 welded reinforcements made of Aisi 304 in one of the chambers (see photos) Volumetric…
Additional information: Dairy; 1 tank with 1 dent in the insulation jacket in the area of the upper bottom (see photos); pipe end cut flush Volumetric volume (L): 10.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes…
Additional information: Chemistry; Tank with safety jacket, Fe (according to DIN 6616D); test overpressure tank 2 bar; test overpressure safety jacket: 0.6 bar; 2 loose bearing saddles, Fe; 1 manhole diameter 600 mm and 1 manhole diameter 500 mm; Tank without bottom outlet; bright protective coating outside; manhole cover plated Volumetric volume (L): 20.000 L Pressure in tank: ATM -…
Additional information: Chemistry; Frame, Fe (galvanized); Hand hole diameter approx. 210 mm (in the case of 1 container the hand hole cover is missing; this container also with stronger dents (see photos)); Ball valves very stiff (possibly defective); some residues of previous content; traces of usage Volumetric volume (L): 560 L Pressure in tank: ATM - atmosferic Material wet parts:…
Additional information: Chemistry; Frame, Fe (galvanized); hand hole diameter approx. 210 mm; 1 agitator flange and 1 cut-off connection in the manhole cover; Ball valve very stiff (possibly defective); some residues of previous content; traces of usage Volumetric volume (L): 1.255 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat…
Volumetric volume (L): 5.236 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 22 L Max Overpressure: 3 Bar Max. working temperature: 120 °C Heat exchanger: RVS 304 Documents included: no…
Volumetric volume (L): 5.236 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 22 L Max Overpressure: 3 Bar Max. working temperature: 120 °C Documents included: no Technical drawing included: no Registration…
Additional information: Dairy; Small dents and several small holes (corrosion) in the insulation jacket; 1 overflow pipe inside the tank; Outlet pipe dented (see photos); some residues of previous content Volumetric volume (L): 3.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no…
Additional information: 1 immersion sleeve for PT 100 probe inside the tank Volumetric volume (L): 2.263 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 16 L Max Overpressure: 4 Bar Max.…
Additional information: 1 immersion sleeve for PT 100 probe inside the tank Volumetric volume (L): 3.331 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 120 °C Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Volume: 17 L Max Overpressure: 3 Bar Max.…
Additional information: Dairy; Diameter manhole appr. 415 mm; dents at the insulation jacket Volumetric volume (L): 900 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Total discharge: yes Type HE on the bottom: heating/cooling jacket Type HE on the cylinder:…
Additional information: Food additives; Frame, Fe (galvanised; frames partially slightly bent and with slight signs of corrosion, especially in the outlet area); Thermoplate, Aisi 304 for heating/cooling around the lower bottom and over half the cylinder height; small dents in the bottom of the inner container (overpressure heating jacket); smaller dents in the insulating jacket (at least 1 container with…
Additional information: 4 supprt brackets, Fe; insulating jacket with smaller holes; outlet with lid diameter approx. 170 mm (in the lid 1 connection diameter 38 mm); Manhole cover closure parts made of Fe; Manhole cover plug screw bent (see photos); some residues of previous content; dents at the insulation jacket Volumetric volume (L): 2.100 L Pressure in tank: ATM -…
Additional information: Fragrance production (alcoholic scents); 2 loose bearing shells made of Fe; 1 manhole approx. 300 x 400 mm in the front bottom (bracket of the manhole cover made of aluminium); Inner length: approx. 2,520 mm; Inner width: approx. 720 mm; Inner height: approx. 1,480 mm Volumetric volume (L): 2.400 L Pressure in tank: ATM - atmosferic Material wet…
Article type: second-hand storage tank Additional information: we can’t give any guarantees about the agitator Volumetric volume (L): 100.000 L Ra inner weld: 0,80 Finish stainless steel: 2B Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: conical Shape of tank: conical…
Additional information: Fragrance production (alcoholic scents); 1 manhole approx. 300 x 400 mm in the front bottom; 2 loose bearing shells, Fe Volumetric volume (L): 1.100 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing…
Additional information: Beverage industry; Diameter manhole appr. 380 mm; some residues of previous content Volumetric volume (L): 1.200 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no…
Additional information: Beverage industry; Smaller dents on feet and outlet; the hight adjustable screws of the feet and the toggle screw of the manhole cover are missing; some residues of previous content; bump at the insulation jacket Volumetric volume (L): 3.500 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with…
Additional information: Beverage industry; Manhole approx. 400/430 mm; Tank with small dents; some residues of previous content Volumetric volume (L): 820 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on…
Additional information: 2 loose bearing shells, Fe (galvanized); 1 manhole each approx. 350 x 445 mm in the front bottom; each stronger dents in the cylinder Volumetric volume (L): 30.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single jacketed with heat-exchanger Heat exchanger: yes Insulation: no Mobile tank: no Total discharge: yes Volume: 3 L Max Overpressure: 5 Bar Max. working temperature: 80 °C Fixation point(s): plastic Documents included: no Technical…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of…
Additional information: Pharmacy; Fame, Fe (galvanized); 1 container with small dents inside the container, the other container with dents inside and in the insulation jacket; According to the manufacturer, the double jacket can be operated at up to 6.0 bar at 120 °C (Behälter KG does not guarantee this, as it is not noted in the drawing)."; some residues of…
Additional information: Yeast storage; Frame, Aisi 304 (partially bent struts); Type plates not available on all containers; 1 welded bracket each in the manhole collar inside (see photos); Suspensions of the manhole cover partially incomplete; Small dents on the containers possible, outlets partially bent (blind caps of the outlets are partially missing; hand lever partially bent); traces of usage Volumetric…
Additional information: paint (chemistry); outlet DN80 with flanged EBRO-valve and screwed male tanker coupling; container built according to DIN6601 for flammable liquids; frame, Aisi 304; partially smaller dents; for 1 container manhole cover made of Fe; some residues of previous content; traces of usage Volumetric volume (L): 1.070 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: Double jacket must be operated without pressure; 2 electric heaters (6 kW) for heating up the heating medium in the double jacket; Attention: The tank is delivered without heating medium (glycerine or thermal oil), which must be filled in on site before commissioning; control cabinet for the electric heaters available (temperature of the double jacket can be regulated…
Additional information: solvents; Frame, Fe (galvanized); some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes…
Additional information: Chemistry; Frame, Fe (galvanized; some struts slightly bent); some residues of previous content; traces of usage Volumetric volume (L): 1.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate…
Additional information: Pharmacy; Double jacket with electric plug-in heater: 9 kW (incomplete; functionality not guaranteed); presumably the lower cylinder area of the tank can also be heated; manhole approx. 310 x 420 mm; Internal fittings (e.g. welded brackets) inside the tank; some residues of previous content Volumetric volume (L): 3.533 L Pressure in tank: ATM - atmosferic Max. temperature (°C):…
Additional information: Fragrance production (alcoholic scents); 2 loose, height-adjustable bearing shells made of Fe; 1 manhole approx. 300 x 400 mm in the front bottom; Inner length: approx. 2,560 mm; Inner width: approx. 720 mm; Inner height: approx. 1,470 mm Volumetric volume (L): 2.400 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Chemistry; Tank lid, Aisi 304; Tank with dents inside, tank lid bulging outwards (probably due to overpressure in the inner tank and double jacket); adhesions inside the tank; small dents in the insulation jacket Volumetric volume (L): 2.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger…
Additional information: Pet food; Manhole diameter approx. 510 mm; 1 x outlet flange diameter pipe inside 80 mm, 1 x threaded outlet diameter pipe inside approx. 125 mm; 1 lateral agitator was welded into the lower cylinder area from previous operator; the heating coil may have been damaged; Insulation was bolted over the cylinder heating coil heating connections; the thermoplate…
Additional information: Food industry; 3-legged frame, Aisi 304; outlet fitting incomplete; 3 load cells (no guarantee of functionality) are included in the scope of delivery; some residues of previous content Volumetric volume (L): 2.300 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no…
Additional information: Fruit juice industry; Frame, Aisi 304; dents in the containers possible; Screw connections of the manhole cover are partially incomplete (the manhole cover is missing on one container); Hand levers of the butterfly valves are bent (in some cases the butterfly valves or the hand levers are also missing); traces of usage Volumetric volume (L): 950 L Pressure…
Additional information: 1 manhole diameter 500 mm in the lower cylinder area; 1 hand hole NW 200 in the upper cylinder area (attention: manhole cover and hand hole cover made of Aisi 304); Tank with adhesions inside; slight rust on the outside of the tank (see photos) Volumetric volume (L): 11.000 L Pressure in tank: ATM - atmosferic Material wet…
Article type: second-hand storage tank Additional information: API650, VLAREM II, previous product Nitric acid 68% Volumetric volume (L): 24.450 L Max. density P (kg/m³): 1.405 Pressure in tank: ATM - atmosferic Design pressure (Bar): 0,13 Bar Max. temperature (°C): 50 °C Material wet parts: SS AISI 304L (V2A) Model: vertical Configuration: double jacket for leak detection (system for detection not…
Article type: second-hand storage tank Additional information: we can’t give any guarantees about the heating/cooling jacket; we can’t give any guarantees about the agitator Volumetric volume (L): 160.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Top type: conical Shape…
Article type: second-hand storage tank Volumetric volume (L): 140.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: dished Shape of tank: cylindrical Bottom type: dished Bottom outlet: yes Total discharge: yes Fixation points: 4 non adjustable feet Manway(s): RVS 304…
Article type: second-hand storage tank Additional information: Never used, the tank will still be finished with a manhole and 3 connections of your choice included in the price Volumetric volume (L): 50.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type:…
Article type: second-hand storage tank Additional information: the tanks have never been used, sloping bottom with stainless steel skirt that needs to be filled with concrete Volumetric volume (L): 95.000 L Max. density P (kg/m³): 1.100 Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank:…
Article type: second-hand storage tank Volumetric volume (L): 20.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Top type: conical Shape of tank: cylindrical Wall type: conical Total discharge: yes Fixation points: 8 non adjustable feet Manway(s): RVS 304 Gasket manway(s): unknown…
Article type: second-hand mixing tank Additional information: we can’t give any guarantees about the agitator Volumetric volume (L): 4.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated Heat exchanger: no Insulation: yes Mobile tank: no Top type: conical Shape of tank: cylindrical Bottom type: conical Total discharge: yes Fixation points:…
Article type: second-hand storage tank Additional information: Small dent on the bottem of the decorative jacket. See pictures.; we can’t give any guarantees about the heating/cooling jacket Volumetric volume (L): 22.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation: yes Mobile tank: no Top…
Additional information: Food production; Manhole approx. 410 x 510 mm; heating coil around approx. 1,800 mm of the lower cylinder height; slight signs of corrosion inside the tanks; pipe end cut flush Volumetric volume (L): 15.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: vertical Configuration: insulated with heat-exchanger Heat exchanger: yes Insulation:…
Additional information: Frame, Aisi 304 (currently 4 wooden blocks are screwed under; see photos); Manhole approx. 345 x 440 mm; some residues of previous content Volumetric volume (L): 5.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included:…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of…
Additional information: Detergents; Manhole cylinder appr. 310 x 440 mm; Height-adjustable screws of the feet are no longer available; screwed-on plastic fitting on the outlet (see photos); Device for level indicator outside (no longer complete); some residues of previous content Volumetric volume (L): 5.000 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 304 (V2A) Model: vertical…
Additional information: Cip-tank in an ice cream factory; Diameter Manhole appr. 420 mm; 1 of the tanks with a spray ball, the end of the outlet cut off and a smaller dent in the upper cylinder area; with a total height of approx. 4.400 mm, this tank is also slightly higher due to the longer feet; some residues of previous…
Volumetric volume (L): 550 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 80 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Fixation point(s): plastic Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for agitator: no Outlet of…
Additional information: chemistry; some residues of previous content Volumetric volume (L): 650 L Pressure in tank: ATM - atmosferic Material wet parts: SS AISI 316 (V4A) Model: horizontal Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: no Flange for agitator: no Outlet of…
Additional information: cip-tank in a spirits factory Volumetric volume (L): 12.000 L Pressure in tank: ATM - atmosferic Max. temperature (°C): 95 °C Material wet parts: SS AISI 304 (V2A) Model: vertical Configuration: single-skin Heat exchanger: no Insulation: no Mobile tank: no Total discharge: yes Documents included: no Technical drawing included: no Registration plate on the tank: yes Flange for…
